ÁñÁ«ÊÓƵ

2013
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934
For the Fiscal Year Ended December 31, 2013
Commission file number 1-16811
(Exact name of registrant as specified in its charter)
Delaware
 
25-1897152
(State of Incorporation)
 
(I.R.S. Employer Identification No.)
600 Grant Street, Pittsburgh, PA 15219-2800
(Address of principal executive offices)
Tel. No. (412) 433-1121
Securities registered pursuant to Section 12 (b) of the Act:
Title of Each Class
 
Name of Exchange on which Registered
ÁñÁ«ÊÓƵ
Common Stock, par value $1.00
 
New York Stock Exchange, Chicago Stock Exchange
 
Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  
Yes     þ    No             
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  
Yes              No     þ    
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15 (d) of the Securities Exchange Act of 1934 during the preceding 12 months and (2) has been subject to such filing requirements for at least the past 90 days.  Yes     þ     No             
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes     þ     No             
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.     þ    
 Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definition of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one): 
Large accelerated filer      þ    
 
Accelerated filer               
Non-accelerated filer              
(Do not check if a smaller reporting company)
 
Smaller reporting company                
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).   Yes              No     þ    
Aggregate market value of Common Stock held by non-affiliates as of June 28, 2013 (the last business day of the registrant’s most recently completed second fiscal quarter): $2.5 billion. The amount shown is based on the closing price of the registrant’s Common Stock on the New York Stock Exchange composite tape on that date. Shares of Common Stock held by executive officers and directors of the registrant are not included in the computation. However, the registrant has made no determination that such individuals are “affiliates” within the meaning of Rule 405 under the Securities Act of 1933.
There were 144,687,528 shares of United States Steel Corporation Common Stock outstanding as of February 20, 2014.
Documents Incorporated By Reference:
Portions of the Proxy Statement for the 2014 Annual Meeting of Stockholders are incorporated into Part III.



INDEX

 

 
 
 
Item 1.

Item 1A

Item 1B

Item 2.

Item 3.

Item 4.

 
 
 
Item 5.

Item 6.

Item 7.

Item 7A

Item 8.

Item 9.

Item 9A

Item 9B

 
 
 
Item 10.

Item 11.

Item 12.

Item 13.

Item 14.

 
 
 
Item 15.

 
 

 
 

 
 

 
 
TOTAL NUMBER OF PAGES
109



Table of Contents

FORWARD-LOOKING STATEMENTS

Certain sections of the Annual Report of ÁñÁ«ÊÓƵ (U. S. Steel) on Form 10-K, particularly Item 1. Business, Item 1A. Risk Factors, Item 3. Legal Proceedings, Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations and Item 7A. Quantitative and Qualitative Disclosures About Market Risk, include forward-looking statements concerning trends or events potentially affecting U. S. Steel. These statements typically contain words such as “anticipates,” “believes,” “estimates,” “expects” or similar words indicating that future outcomes are uncertain. In accordance with “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, these statements are accompanied by cautionary language identifying important factors, though not necessarily all such factors, that could cause future outcomes to differ materially from those set forth in forward-looking statements. For additional factors affecting the businesses of U. S. Steel, see “Item 1A. Risk Factors” and “Supplementary Data – Disclosures About Forward-Looking Statements.” References in this Annual Report on Form 10-K to “U. S. Steel,” “the Company,” “we,” “us” and “our” refer to U. S. Steel and its consolidated subsidiaries, unless otherwise indicated by the context.

3

Table of Contents

PART I

Item 1. BUSINESS

U. S. Steel is an integrated steel producer of flat-rolled and tubular products with major production operations in North America and Europe. An integrated producer uses iron ore and coke as primary raw materials for steel production. U. S. Steel has annual raw steel production capability of 27 million net tons (22 million tons in North America and 5.0 million tons in Europe). On December 31, 2013, U. S. Steel permanently shut down its iron and steelmaking facilities at Hamilton Works reducing U. S. Steel's North American annual raw steel capability by 2.3 million tons. According to World Steel Association’s latest published statistics, U. S. Steel was the twelfth largest steel producer in the world in 2012. U. S. Steel is also engaged in other business activities consisting primarily of railroad services and real estate operations.

2013 marked the start of the transformation of U. S. Steel as we execute on our shareholder value creation strategy: earn the right to grow, and drive and sustain profitable growth. Through a disciplined approach we now refer to as “The Carnegie Way,” we are working to strengthen our balance sheet, with more intense focus on cash flow, and have launched a series of initiatives that we believe will enable us to add value, get leaner faster, right-size, and improve our performance across our core business process capabilities, including commercial, supply chain, manufacturing, procurement, innovation, and operational and functional support. We are on a mission to define and create a sustainable competitive advantage with a relentless focus on economic profit, our customers, our cost structure and innovation.

On January 31, 2012, U. S. Steel sold U. S. Steel Serbia d.o.o. (ÁñÁ«ÊÓƵS) to the Republic of Serbia for a purchase price of one dollar. In addition, U. S. Steel Košice received a $40 million payment for certain intercompany balances owed by U. S. Steel Serbia for raw materials and support services. U. S. Steel recorded a total non-cash charge of $399 million in the first quarter of 2012, which includes the loss on the sale and a charge of approximately $50 million to recognize the cumulative currency translation adjustment related to ÁñÁ«ÊÓƵS.

4

Table of Contents


5

Table of Contents

Segments

U. S. Steel has three reportable operating segments: Flat-rolled Products (Flat-rolled), U. S. Steel Europe (ÁñÁ«ÊÓƵE) and Tubular Products (Tubular). The results of several operating segments that do not constitute reportable segments are combined and disclosed in the Other Businesses category.

The Flat-rolled segment includes the operating results of U. S. Steel’s North American integrated steel plants and equity investees involved in the production of slabs, rounds, strip mill plates, sheets and tin mill products, as well as all iron ore and coke production facilities in the United States and Canada. These operations primarily serve North American customers in the service center, conversion, transportation (including automotive), construction, container, and appliance and electrical markets. Flat-rolled supplies steel rounds and hot-rolled bands to Tubular.

Flat-rolled has annual raw steel production capability of 22 million tons. Prior to December 31, 2013, Flat-rolled had raw steel production capability of 24.3 million tons which included 2.3 million tons from Hamilton Works. Raw steel production was 17.9 million tons in 2013, 19.1 million tons in 2012 and 18.6 million tons in 2011. Raw steel production averaged 74 percent of capability in 2013, 78 percent of capability in 2012 and 77 percent of capability in 2011.

The ÁñÁ«ÊÓƵE segment includes the operating results of U. S. Steel Košice (ÁñÁ«ÊÓƵK), U. S. Steel’s integrated steel plant and coke production facilities in Slovakia. Prior to January 31, 2012, the ÁñÁ«ÊÓƵE segment also included the operating results of ÁñÁ«ÊÓƵS, U. S. Steel’s integrated steel plant and other facilities in Serbia, and an equity investee, which were sold on January 31, 2012. ÁñÁ«ÊÓƵE primarily serves customers in the European construction, service center, conversion, container, transportation (including automotive), appliance and electrical, and oil, gas and petrochemical markets. ÁñÁ«ÊÓƵE produces and sells slabs, sheet, strip mill plate, tin mill products and spiral welded pipe, as well as heating radiators and refractory ceramic materials.

ÁñÁ«ÊÓƵE has annual raw steel production capability of 5.0 million tons from ÁñÁ«ÊÓƵK. Prior to January 31, 2012, ÁñÁ«ÊÓƵE had raw steel production capability of 7.4 million tons, which consisted of 5.0 million and 2.4 million tons from ÁñÁ«ÊÓƵK and ÁñÁ«ÊÓƵS, respectively. ÁñÁ«ÊÓƵE’s raw steel production was 4.6 million tons in 2013, 4.5 million tons in 2012 and 5.6 million tons in 2011. ÁñÁ«ÊÓƵE’s raw steel production averaged 92 percent of capability in 2013, 87 percent of capability in 2012 and 76 percent of capability in 2011.

ÁñÁ«ÊÓƵK’s raw steel production was 4.6 million tons in 2013, 4.4 million tons in 2012 and 4.2 million tons in 2011. ÁñÁ«ÊÓƵK’s raw steel production averaged 92 percent of capability in 2013, 88 percent of capability in 2012 and 84 percent of capability in 2011.

The Tubular segment includes the operating results of U. S. Steel’s tubular production facilities, primarily in the United States, and equity investees in the United States and Brazil. These operations produce and sell seamless and electric resistance welded (ERW) steel casing and tubing (commonly known as oil country tubular goods or OCTG), standard and line pipe and mechanical tubing and primarily serve customers in the oil, gas and petrochemical markets. Tubular’s annual production capability is 2.8 million tons and U. S. Steel Tubular Products, Inc. (ÁñÁ«ÊÓƵTP) is the largest supplier to the combined U.S. and Canadian market. ÁñÁ«ÊÓƵTP is designing and developing a range of premium and semi-premium connections to address the growing and demanding needs for technical solutions to our end users' well challenges. ÁñÁ«ÊÓƵTP also offers rig site services, which provides the technical expertise for proper installation of our tubular products and proprietary connections at the well site.

Other Businesses includes railroad services and real estate operations.

For further information, see Note 3 to the Consolidated Financial Statements.


6

Table of Contents

Financial and Operational Highlights

Net Sales

Net Sales by Segment

(Dollars in millions, excluding intersegment sales)
 
2013
 
2012
 
2011
Flat-rolled
 
$
11,572

 
$
12,908

 
$
12,367

ÁñÁ«ÊÓƵE
 
2,941

 
2,949

 
4,306

Tubular
 
2,772

 
3,283

 
3,034

Total sales from reportable segments
 
17,285

 
19,140

 
19,707

Other Businesses
 
139

 
188

 
177

Net sales
 
$
17,424

 
$
19,328

 
$
19,884



7

Table of Contents

Income (Loss) from Operations by Segment(a)  

 
 
Year Ended December 31,
(Dollars in Millions)
 
2013
 
2012
 
2011
Flat-rolled
 
$
105

 
$
400

 
$
469

ÁñÁ«ÊÓƵE(b)
 
28

 
34

 
(162
)
Tubular
 
190

 
366

 
316

Total income from reportable segments
 
323

 
800

 
623

Other Businesses
 
77

 
55

 
46

Reportable segments and Other Businesses income from operations
 
400

 
855

 
669

Postretirement benefit expenses (c)
 
(221
)
 
(297
)
 
(386
)
Other items not allocated to segments:
 
 
 
 
 
 
Impairment of goodwill (Note 11)
 
(1,806
)
 

 

Restructuring and other charges (Note 23)
 
(248
)
 

 

Environmental remediation charge
 
(32
)
 

 
(18
)
Write-off of equity investment (Note 9)
 
(16
)
 

 

Supplier contract dispute settlement
 
23

 
15

 

Net loss on the sale of assets (Note 4)
 

 
(310
)
 

Labor agreement lump sum payments (Note 15)
 

 
(35
)
 

Property tax settlements
 

 
19

 

Total (loss) income from operations
 
$
(1,900
)
 
$
247

 
$
265

(a)
See Note 3 to the Consolidated Financial Statements for reconciliations and other disclosures required by Accounting Standards Codification Topic 280.
(b)
Includes the results of ÁñÁ«ÊÓƵS through the disposition date of January 31, 2012. See Note 4 to the Consolidated Financial Statements for further details.
(c)
Consists of the net periodic benefit cost elements, other than service cost and amortization of prior service cost for active employees, associated with our pension, retiree health care and life insurance benefit plans.

Reportable Segments and Other Businesses – Income (Loss) from Operations (IFO)

Total Reportable Segments and Other Businesses
Income (Loss) from Operations(a) 

(a)
Amounts prior to 2011 have been restated to reflect a change in our segment allocation methodology for postretirement benefit expenses.

8

Table of Contents

Steel Shipments

9

Table of Contents

Steel Shipments by Product and Segment



The following table shows steel shipments to end customers, joint ventures and equity investees of U. S. Steel.

(Thousands of Tons)
 
Flat-rolled
 
ÁñÁ«ÊÓƵE
 
Tubular
 
Total
Product—2013
 
 
 
 
 
 
 
 
Hot-rolled Sheets
 
5,028

 
1,426

 

 
6,454

Cold-rolled Sheets
 
4,347

 
553

 

 
4,900

Coated Sheets
 
3,599

 
762

 

 
4,361

Tin Mill Products
 
1,204

 
385

 

 
1,589

Oil country tubular goods (OCTG)
 

 

 
1,370

 
1,370

Standard and line pipe
 

 
69

 
264

 
333

Semi-finished and Plates
 
466

 
805

 

 
1,271

Other
 

 

 
123

 
123

TOTAL
 
14,644

 
4,000

 
1,757

 
20,401

Memo: Intersegment Shipments from Flat-rolled to Tubular
 
 
 
 
 
 
 
 
Hot-rolled sheets
 
923

 
 
 
 
 
 
Rounds
 
776

 
 
 
 
 
 
Product—2012
 
 
 
 
 
 
 
 
Hot-rolled Sheets
 
5,733

 
1,197

 

 
6,930

Cold-rolled Sheets
 
4,476

 
558

 

 
5,034

Coated Sheets
 
3,490

 
772

 

 
4,262

Tin Mill Products
 
1,220

 
388

 

 
1,608

Oil country tubular goods (OCTG)
 

 

 
1,339

 
1,339

Standard and line pipe
 

 
82

 
396

 
478

Semi-finished and Plates
 
1,055

 
819

 

 
1,874

Other
 

 

 
151

 
151

TOTAL
 
15,974

 
3,816

 
1,886

 
21,676

Memo: Intersegment Shipments from Flat-rolled to Tubular
 
 
 
 
 
 
 
 
Hot-rolled sheets
 
938

 
 
 
 
 
 
Rounds
 
865

 
 
 
 
 
 
Memo: Intersegment Shipments from ÁñÁ«ÊÓƵE to Flat-rolled
 
 
 
 
 
 
 
 
Slabs
 
249

 
 
 
 
 
 
Product—2011
 
 
 
 
 
 
 
 
Hot-rolled Sheets
 
5,421

 
1,940

 

 
7,361

Cold-rolled Sheets
 
4,311

 
707

 

 
5,018

Coated Sheets
 
3,136

 
816

 

 
3,952

Tin Mill Products
 
1,177

 
528

 

 
1,705

Oil country tubular goods (OCTG)
 

 

 
1,276

 
1,276

Standard and line pipe
 

 
8

 
408

 
416

Semi-finished, Bars and Plates
 
1,464

 
865

 

 
2,329

Other
 

 
68

 
128

 
196

TOTAL
 
15,509

 
4,932

 
1,812

 
22,253

Memo: Intersegment Shipments from Flat-rolled to Tubular
 
 
 
 
 
 
 
 
Hot-rolled sheets
 
1,554

 
 
 
 
 
 
Rounds
 
686

 
 
 
 
 
 
Memo: Intersegment Shipments from ÁñÁ«ÊÓƵE to Flat-rolled
 
 
 
 
 
 
 
 
Slabs
 
71

 
 
 
 
 
 

10

Table of Contents

Steel Shipments by Market and Segment

The following table does not include shipments to end customers by joint ventures and other equity investees of U. S. Steel. Shipments of materials to these entities are included in the “Further Conversion – Joint Ventures” market classification. No single customer accounted for more than 10 percent of gross annual revenues.
(Thousands of Tons)
 
Flat-rolled
 
ÁñÁ«ÊÓƵE
 
Tubular
 
Total
Major Market – 2013
 
 
 
 
 
 
 
 
Steel Service Centers
 
2,721

 
560

 

 
3,281

Further Conversion – Trade Customers
 
4,409

 
286

 

 
4,695

– Joint Ventures
 
1,664

 

 

 
1,664

Transportation (Including Automotive)
 
2,480

 
709

 

 
3,189

Construction and Construction Products
 
773

 
1,501

 
132

 
2,406

Containers
 
1,259

 
393

 

 
1,652

Appliances and Electrical Equipment
 
666

 
275

 

 
941

Oil, Gas and Petrochemicals
 

 
15

 
1,540

 
1,555

Exports from the United States
 
365

 

 
85

 
450

All Other
 
307

 
261

 

 
568

TOTAL
 
14,644

 
4,000

 
1,757

 
20,401

Major Market – 2012
 
 
 
 
 
 
 
 
Steel Service Centers
 
2,882

 
567

 

 
3,449

Further Conversion – Trade Customers
 
5,119

 
310

 

 
5,429

– Joint Ventures
 
1,823

 

 

 
1,823

Transportation (Including Automotive)
 
2,511

 
650

 

 
3,161

Construction and Construction Products
 
869

 
1,350

 
144

 
2,363

Containers
 
1,290

 
387

 

 
1,677

Appliances and Electrical Equipment
 
727

 
272

 

 
999

Oil, Gas and Petrochemicals
 

 
20

 
1,601

 
1,621

Exports from the United States
 
409

 

 
141

 
550

All Other
 
344

 
260

 

 
604

TOTAL
 
15,974

 
3,816

 
1,886

 
21,676

Major Market – 2011
 
 
 
 
 
 
 
 
Steel Service Centers
 
2,988

 
943

 

 
3,931

Further Conversion – Trade Customers
 
4,805

 
539

 
(6
)
 
5,338

– Joint Ventures
 
1,803

 

 

 
1,803

Transportation (Including Automotive)
 
2,268

 
707

 

 
2,975

Construction and Construction Products
 
870

 
1,622

 
128

 
2,620

Containers
 
1,221

 
525

 

 
1,746

Appliances and Electrical Equipment
 
650

 
328

 

 
978

Oil, Gas and Petrochemicals
 

 
14

 
1,526

 
1,540

Exports from the United States
 
572

 

 
164

 
736

All Other
 
332

 
254

 

 
586

TOTAL
 
15,509

 
4,932

 
1,812

 
22,253


11

Table of Contents

Business Strategy

Over the long term, our strategy is to be forward-looking, grow responsibly, generate a competitive return on capital and meet our financial and stakeholder obligations. We remain committed to being a world leader in safety and environmental stewardship; producing innovative value added steel products, improving our quality, cost competitiveness and customer service; and attracting, developing and retaining a diverse workforce with the talent and skills needed for our long-term success.

2013 marked the start of the transformation of U. S. Steel as we execute on our shareholder value creation strategy: earn the right to grow, and drive and sustain profitable growth. Through a disciplined approach we now refer to as “The Carnegie Way”, we are working to strengthen our balance sheet, with more intense focus on cash flow, and have launched a series of initiatives that we believe will enable us to add value, get leaner faster, right-size, and improve our performance across our core business process capabilities, including commercial, supply chain, manufacturing, procurement, innovation, and operational and functional support. We are on a mission to define and create a sustainable competitive advantage with a relentless focus on economic profit, our customers, our cost structure and innovation.



12

Table of Contents

Safety

We believe improving safety performance is consistent with the Company’s other strategic objectives such as improving quality, cost competiveness and customer service. Through 2013, the nine-year trends for our global key safety measurements: recordable injuries, days away from work rate and severity rate showed improvement of 45 percent, 66 percent and 94 percent respectively, as shown in the following graphs.

        

13

Table of Contents

Environmental Stewardship

U. S. Steel maintains a comprehensive environmental policy. The Executive Environmental Committee, which is comprised of U. S. Steel officers, meets regularly to review environmental issues and compliance. The Board of Directors and the Corporate Governance and Public Policy Committee receive regular updates on environmental matters. Also, U. S. Steel, largely through the American Iron and Steel Institute, the Canadian Steel Producers Association, the World Steel Association and the European Confederation of Iron and Steel Industries (Eurofer), is involved in the promotion of cost effective environmental strategies through the development of appropriate air, water, waste and climate change laws and regulations at the local, state, national and international levels.

We are committed to reducing emissions as well as our carbon footprint. We have an established program to investigate, share and create innovative, best practice solutions throughout U. S. Steel to manage and reduce energy consumption and greenhouse gas (GHG) emissions. We are also committed to investing in technologies to further improve the environmental performance of our steelmaking process. In addition, we continue to focus on implementing energy reduction strategies, use of efficient energy sources, waste reduction management and the utilization of by-product fuels.

We have achieved air opacity performance improvements at our domestic coke plants. Continuous process improvements have allowed us to make environmental progress through the utilization of enhanced refractory repair programs and strategically timed maintenance on the structural integrity of our coke batteries. We have also implemented data analysis to track our coke oven performance allowing us to proactively prioritize maintenance activities. At Clairton and Granite City, we have installed new low emission quench towers for both new and existing batteries. This innovative quench system employs technology that reduces particulate emissions.

All of our major production facilities have Environmental Management Systems certified to the ISO 14001 Standard. This standard, published by the International Organization for Standardization, provides the framework for the measurement and improvement of environmental impacts of the certified facility.

We have submitted an application seeking approval for an innovative approach to environmental compliance at our Minntac facility. This approach will ensure compliance with air and water regulations and will provide reductions in particulate matter, mercury, sulfur dioxide, and sulfate. Once approved, this will be the first multi-media compliance solution of its type for iron ore operations in the United States.

We are certified by the Wildlife Habitat Council (WHC) for our Corporate Lands for Learning (CLL) program at our South Taylor Environmental Park (STEP) facility near Pittsburgh, Pennsylvania, which incorporates inter-action with elementary school programs in Western Pennsylvania. Gary Works and Clairton Works are also CLL-certified. In addition, the STEP, the Clairton Plant, the Irvin Plant, Gary Works, Great Lakes Works and the Keetac and Minntac facilities have certifications under the WHC Wildlife at Work Program.

Commercial Strategy

Our commercial strategy is focused on providing value-added steel products, including advanced high strength steel and coated sheets for the automotive and appliance industries, electrical steel sheets for the manufacture of motors and electrical equipment, galvanized and Galvalume® sheets for construction, tin mill products for the container industry and oil country tubular goods and premium connections for the oil and gas industry, including steel for the developing North American shale oil and gas markets.

We are committed to meeting our customers’ requirements by developing new steel products and uses for steel. In connection with this commitment, we have research centers in Pittsburgh, Pennsylvania, and Košice, Slovakia. We also have an automotive center in Troy, Michigan and an innovation and technology center for Tubular products in Houston, Texas. The focus of these centers is to develop new products and work with our customers to better serve their needs. Examples of our customer focused product innovation include the development of advanced high strength steels, including Dual-Ten® and Transformation Induced Plasticity (TRIP) steels, that provide high strength to meet automobile passenger safety requirements while significantly reducing weight to meet fuel efficiency requirements; and a line of premium and semi-premium connections to meet our tubular customers’ increasingly complex needs for offshore and horizontal drilling.

Our decisions concerning what facilities to operate and at what levels are made based upon our customers’ orders for products as well as the capabilities and cost performance of our locations. In depressed markets such as those

14

Table of Contents

experienced in 2009, we concentrated production operations at several plant locations and did not operate others in response to customer demand.

Capital Projects and Other Investments

In recent years, we have completed or neared completion on several key projects of strategic importance. We have made significant progress to improve our coke self-sufficiency and reduce our reliance on purchased coke for the steelmaking process through the application of advanced technologies, upgrades to our existing coke facilities and increased use of natural gas and pulverized coal in our operations. We have completed the construction of a technologically and environmentally advanced battery at the Mon Valley Works’ Clairton Plant with a capacity of 960,000 tons per year. Initial start-up of the battery began in November 2012 and the battery has reached full production capacity. We have been constructing a two module carbon alloy facility at Gary Works, which utilizes an environmentally compliant, energy efficient and flexible production technology to produce a coke substitute product. The facility has a projected capacity of 500,000 tons per year when both modules are completed. Construction of the first module is complete, and we continue to focus on the optimization and reliability of operations of that module. We have temporarily suspended construction activities on the second module at this time based on current economic conditions, our coke requirements in North America and additional work on the first module.
In an effort to increase our participation in the automotive market as vehicle emission and safety requirements become increasingly stringent, PRO-TEC Coating Company, our joint venture in Ohio with Kobe Steel, Ltd., constructed and financed a new automotive continuous annealing line (CAL) that began operations during the first quarter of 2013.
We are also currently developing additional projects within our Tubular segment, such as facility enhancements and additional premium connections that we believe will further improve our ability to support our Tubular customers’ evolving needs.
We are continuing our efforts to implement an enterprise resource planning (ERP) system to replace our existing information technology systems, which will enable us to operate more efficiently. The completion of the ERP project is expected to provide further opportunities to streamline, standardize and centralize business processes in order to maximize cost effectiveness, efficiency and control across our global operations.
Over the longer term, we are considering business strategies to leverage our significant iron ore position in the United States and to exploit opportunities related to the availability of reasonably priced natural gas as an alternative to coke in the iron reduction process to improve our cost competitiveness, while reducing our dependence on coal and coke. We are considering an expansion of our iron ore pellet operations at our Keewatin, MN (Keetac) facility which would increase our production capability by approximately 3.6 million tons thereby increasing our iron ore self-sufficiency. The total cost of this project as currently conceived is broadly estimated to be approximately $820 million. Final permitting for the expansion was completed in December 2011. An extension to the construction air permit was granted during November 2013 that extends the permit until September 2014. We are examining alternative iron and steelmaking technologies such as gas-based, direct-reduced iron (DRI) and electric arc furnace (EAF) steelmaking. We are currently in the permitting process for the installation of an EAF at our Fairfield Works in Alabama. We submitted air and water permit applications to the Jefferson County Department of Health and the Alabama Department of Environmental Management, respectively, in February 2014.
The DRI process requires iron pellets with a lower silica content than blast furnace pellets. We have verified that our iron ore reserves are suitable for direct reduced (DR) grade pellet production and are examining the capital and engineering design process requirements to produce DR grade pellets at our Minntac operations for use internally by the Company if we were to construct a DRI facility or for sale to external third parties with DRI facilities.
Our capital investments in the future may reflect such strategies, although we expect that iron and steelmaking through the blast furnace and basic oxygen furnace manufacturing processes will remain our primary processing technology for the long term.

The foregoing statements regarding expected capital expenditures, capital projects, emissions reductions and expected benefits from the implementation of these projects are forward-looking statements. Factors that may affect our capital spending and the associated projects include: (i) levels of cash flow from operations; (ii) changes in tax laws; (iii) general economic conditions; (iv) steel industry conditions; (v) cost and availability of capital; (vi) receipt of necessary permits; (vii) unforeseen hazards such as contractor performance, material shortages, weather conditions, explosions or fires; (viii) our ability to implement these projects; and (ix) the requirements of applicable laws and regulations. There is also a risk that the completed projects will not produce at the expected levels and within the costs currently projected.

15

Table of Contents

Predictions regarding benefits resulting from the implementation of the ERP project are subject to uncertainties. Actual results could differ materially from those expressed in these forward-looking statements.

Workforce

At U. S. Steel, we are committed to attracting, developing, and retaining a workforce of talented, diverse people — all working together in an environment where our employees contribute and excel as they deliver results for our Company, shareholders, customers and communities. We regularly review our human capital needs and focus on the selection, development and retention of employees in order to sustain and enhance our competitive position within the markets in which we compete.

Capital Structure and Liquidity

Our financial goals are to maintain or enhance our liquidity, maintain a solid capital structure, focus capital investments on key projects of long-term strategic importance and position ourselves for success in the longer term. During 2013, U. S. Steel issued $316 million of 2.75% Senior Convertible Notes due 2019 and $275 million of 6.875% Senior Notes due 2021. We used the majority of the proceeds to repurchase approximately $542 million aggregate principal amount of our 4.00% Senior Convertible Notes due 2014. Also during 2013, we entered into a €10 million (approximately $14 million at December 31, 2013) unsecured credit facility for ÁñÁ«ÊÓƵK that expires in December 2016. We made a voluntary contribution of $140 million to our main defined benefit pension plan. We ended 2013 with $604 million of cash and cash equivalents on hand and total liquidity of $2.3 billion. As part of our Carnegie Way initiative to remain competitive and drive world class growth, we are implementing extended vendor payment terms to be better aligned with other large industrial companies and our peers in the metals and mining sector.

Steel Industry Background and Competition

The global steel industry is cyclical, highly competitive and has historically been characterized by overcapacity.

According to World Steel Association’s latest published statistics, U. S. Steel was the twelfth largest steel producer in the world in 2012. We believe we are currently the largest integrated steel producer headquartered in North America, one of the largest integrated flat-rolled producers in Central Europe and the largest tubular producer in North America. U. S. Steel competes with many North American and international steel producers. Competitors include integrated producers, which, like U. S. Steel, use iron ore and coke as primary raw materials for steel production, and EAF producers, which primarily use steel scrap and other iron-bearing feedstocks as raw materials. Global steel capacity has continued to increase, with some published sources estimating that steel capacity in China alone is at or is nearing one billion metric tons per year. In addition, other products, such as aluminum, plastics and composites, compete with steel in some applications.

EAF producers typically require lower capital expenditures for construction of facilities and may have lower total employment costs; however, these competitive advantages may be minimized or eliminated by the cost of scrap when scrap prices are high. Some mini-mills utilize thin slab casting technology to produce flat-rolled products and are increasingly able to compete directly with integrated producers in a number of flat-rolled product applications previously produced only by integrated steelmaking.

U. S. Steel provides defined benefit pension and/or other postretirement benefits to approximately 136,000 current employees, retirees and their beneficiaries. Most of our other competitors do not have comparable retiree obligations.

International competitors may have lower labor costs than U.S. producers and some are owned, controlled or subsidized by their governments, artificially reducing their costs and allowing production and pricing decisions to be influenced by political, social and economic policy considerations, as well as prevailing market conditions.

Demand for flat-rolled products is influenced by a wide variety of factors, including but not limited to macro-economic drivers, the supply-demand balance, inventories, imports and exports, currency fluctuations, and the demand from flat-rolled consuming markets. The largest drivers of North American consumption have historically been the automotive and construction markets, which make up at least 50 percent of total sheet consumption. Other sheet consuming industries include appliance, converter, container, tin, energy, electrical equipment, agricultural, domestic and commercial equipment and industrial machinery.

ÁñÁ«ÊÓƵE conducts business primarily in Europe. Like our domestic operations, ÁñÁ«ÊÓƵE is affected by the cyclical nature of demand for steel products and the sensitivity of that demand to worldwide general economic conditions. The sovereign debt issues and the resulting economic uncertainties are adversely affecting markets in the European Union (EU). We

16

Table of Contents

are subject to market conditions in those areas, which are influenced by many of the same factors that affect U.S. markets, as well as matters specific to international markets such as quotas, tariffs and other protectionist measures.

Demand for energy related tubular products depends on several factors, most notably the number of oil and natural gas wells being drilled, completed and re-worked, the depth and drilling conditions of these wells and the drilling techniques utilized. The level of these activities depends primarily on the demand for natural gas and oil and expectations about future prices for these commodities. Demand for our tubular products is also affected by the continuing development of shale oil and gas resources, the level of production by domestic manufacturers, inventories maintained by manufacturers, distributors, and end users and by the level of new capacity and imports in the markets we serve.

Steel sheet imports to the United States accounted for an estimated 14 percent of the U.S. steel sheet market in 2013, 14 percent in 2012 and 13 percent in 2011. Increases in future levels of imported steel could reduce future market prices and demand levels for steel produced in our North American facilities.

Imports of flat-rolled steel to Canada accounted for an estimated 36 percent of the Canadian market for flat-rolled steel products in 2013, 34 percent in 2012 and 35 percent in 2011.

Energy related tubular products imported into the United States accounted for an estimated 49 percent of the U.S. domestic market in 2013, 52 percent in 2012 and 47 percent in 2011.
In recent years, a significant number of steel imports have been found to violate U.S. or Canadian trade laws. Under these laws, antidumping duties (AD) can be imposed against dumped products, which are products sold at a price that is below that producer's sales price in its home market or at a price that is lower than its cost of production. Countervailing duties (CVD) can be imposed against products that have benefited from foreign government assistance for the production, manufacture, or exportation of the product. For many years, U. S. Steel, other producers, customers and the United Steelworkers (USW) have sought the imposition of duties and in many cases have been successful.

AD and CVD orders are generally subject to review every five years and we actively participate in such review proceedings. In one such five-year (sunset) review conducted in the United States, the U.S. International Trade Commission (ITC) found on September 12, 2013 that revocation of an AD order on welded large-diameter line pipe from Japan would likely lead to the continuation or recurrence of material injury to the domestic industry making this product. The U.S. Department of Commerce (DOC) had previously found that revocation of the order would likely lead to the continuation or recurrence of dumping. As a result of these rulings, the order on welded large-diameter line pipe from Japan will likely remain in place for at least five more years.

The following international trade orders of interest to U. S. Steel are currently undergoing five-year (sunset) reviews in the United States: AD and CVD orders on welded line pipe from China. The U.S. government recently completed five-year reviews of: (i) an AD order on hot-rolled steel from China; (ii) AD and CVD orders on hot-rolled steel from India; (iii) AD and CVD orders on hot-rolled steel from Indonesia; (iv) an AD order on hot-rolled steel from Taiwan; (v) AD and CVD orders on hot-rolled steel from Thailand; (vi) an AD order on hot-rolled steel from Ukraine; and (vii) AD and CVD orders on circular welded pipe from China. In each of those reviews, the U.S. government decided to keep the orders in place.
As in the past, U. S. Steel continues to monitor unfairly traded imports and is prepared to seek appropriate remedies against such importing countries. On July 2, 2013, U. S. Steel and eight other domestic producers filed AD and CVD petitions against imports of oil country tubular goods (OCTG) from India and Turkey, along with AD petitions against imports of OCTG from the Philippines, Saudi Arabia, South Korea, Taiwan, Thailand, Ukraine, and Vietnam. These petitions allege that unfairly-traded imports from the subject countries are both a cause and a threat of material injury to U.S. producers of OCTG. While U. S. Steel strongly believes that the imports in question were traded unfairly, and that relief is fully justified under U.S. law, the outcome of such litigation is uncertain. On August 16, 2013, the ITC made affirmative determinations in the preliminary phase of its injury investigations. The DOC announced its preliminary determinations in the CVD investigations of OCTG from India and Turkey on December 17, 2013, and it announced its preliminary determinations in the AD investigations of India, Korea, Philippines, Saudi Arabia, Taiwan, Thailand, Turkey, Ukraine, and Vietnam on February 18, 2014. As a result of the preliminary determinations, DOC will "suspend liquidation" and require cash deposits of AD and/or CVD duties for imports of OCTG from those producers and exporters with dumping margins and/or subsidy rates equal to or greater than 2% ad valorem. Producers and exporters from Korea, the country accounting for the largest volume of OCTG imports into the United States, received dumping margins lower than 2% ad valorem. However, the results are only preliminary and there is precedent for significant differences in dumping margin calculations between preliminary and final determinations. DOC is scheduled to issue its final AD

17

Table of Contents

and CVD determinations this summer. The ITC is currently expected to make its final determinations of injury in August. If the determinations of both agencies are affirmative, DOC will issue AD and CVD orders.
Total imports of flat-rolled carbon steel products (excluding quarto plates and wide flats) to the 27 countries currently comprising the EU were 14 percent of the EU market in 2013, 13 percent in 2012 and 17 percent in 2011. Increases in future levels of imported steel could reduce market prices and demand levels for steel produced by ÁñÁ«ÊÓƵE.

We expect to continue to experience competition from imports and will continue to closely monitor imports of products in which we have an interest. Additional complaints may be filed if unfairly-traded imports adversely impact, or threaten to adversely impact, our financial results.

U. S. Steel’s businesses are subject to numerous federal, state and local laws and regulations relating to the storage, handling, emission and discharge of environmentally sensitive materials. U. S. Steel believes that our major North American and many European and Japanese integrated steel competitors are confronted by substantially similar environmental conditions and thus does not believe that our relative position with regard to such competitors is materially affected by the impact of environmental laws and regulations. However, the costs and operating restrictions necessary for compliance with environmental laws and regulations may have an adverse effect on U. S. Steel’s competitive position with regard to domestic mini-mills, some foreign steel producers (particularly in developing economies such as China) and producers of materials which compete with steel, all of which may not be required to undertake equivalent costs in their operations. In addition, the specific impact on each competitor varies depending on a number of factors, including the age and location of its operating facilities and its production methods. U. S. Steel is also responsible for remediation costs related to our prior disposal of environmentally sensitive materials. Many of our competitors have fewer historical liabilities. For further information, see “Item 3. Legal Proceedings – Environmental Proceedings” and “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Environmental Matters, Litigation and Contingencies.”

Many nations have adopted or are considering regulation of CO2 emissions. The integrated steel process involves a series of chemical reactions involving carbon that create CO2 emissions. This distinguishes integrated steel producers from mini-mills and many other industries where CO2 generation is usually linked primarily to energy usage. In the United States, the Environmental Protection Agency (EPA) has published rules for regulating GHG emissions for certain facilities and has implemented various reporting requirements. In a previous Congressional session, legislation regulating CO2 emissions was passed in the House of Representatives and was introduced in the Senate. We do not know what action, if any, may be taken by the current or future sessions of Congress. The EU has established GHG regulations and Canada has published details of a regulatory framework for GHG emissions. Such regulations may entail substantial costs for emission allowances, restriction of production, and higher prices for coking coal, natural gas and electricity generated by carbon-based systems. Some foreign nations such as China and India are not aggressively pursuing regulation of CO2 and integrated steel producers in such countries may achieve a competitive advantage over U. S. Steel. For further information, see “Item 3. Legal Proceedings – Environmental Proceedings” and “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Environmental Matters, Litigation and Contingencies.”

U. S. Steel is subject to foreign currency exchange risks as a result of its European and Canadian operations. ÁñÁ«ÊÓƵE’s revenues are primarily in euros and its costs are primarily in U.S. dollars and euros. U. S. Steel Canada’s (ÁñÁ«ÊÓƵC’s) revenues and costs are denominated in both Canadian and U.S. dollars. In addition, international cash requirements have been and in the future may be funded by intercompany loans, creating intercompany monetary assets and liabilities in currencies other than the functional currencies of the entities involved, which can impact income when they are remeasured at the end of each period. Prior to January 1, 2012, a $1.6 billion U.S. dollar-denominated intercompany loan from a U.S. subsidiary to a European subsidiary had significant implications for U. S. Steel as a result of foreign currency accounting remeasurement effects. Effective January 1, 2012, the functional currency of the European entity was changed from the euro to the U.S. dollar because of significant changes in economic facts and circumstances, including the sale of ÁñÁ«ÊÓƵS.

Facilities and Locations

Flat-rolled

Except for the Fairfield pipe facility, the operating results of all the facilities within U. S. Steel’s integrated steel plants in North America are included in Flat-rolled. These facilities include Gary Works, Great Lakes Works, Mon Valley Works, Granite City Works, Lake Erie Works, Fairfield Works and Hamilton Works. During the fourth quarter of 2013, U. S. Steel decided to permanently shut down its iron and steelmaking facilities at Hamilton Works. The operating results of

18

Table of Contents

U. S. Steel’s coke and iron ore pellet operations and many equity investees in North America are also included in Flat-rolled.

Gary Works, located in Gary, Indiana, has annual raw steel production capability of 7.5 million tons. Gary Works has one coke battery,a two module carbon alloy facility (of which only one is currently operational), four blast furnaces, six steelmaking vessels, a vacuum degassing unit and four slab casters. Gary Works generally consumes all the coke it produces and sells coke by-products to the chemical and raw material industries. Finishing facilities include a hot strip mill, two pickling lines, two cold reduction mills, three temper mills, a double cold reduction line, four annealing facilities and two tin coating lines. Principal products include hot-rolled, cold-rolled and coated sheets and tin mill products. Gary Works also produces strip mill plate in coil. We have been constructing a two module carbon alloy facility at Gary Works, which utilizes an environmentally compliant, energy efficient and flexible production technology to produce a coke substitute product. The facility has a projected capacity of 500,000 tons per year when both modules are completed. Construction of the first module is complete, and we continue to focus on the optimization and reliability of operations of that module. We have temporarily suspended construction activities on the second module at this time based on current economic conditions, our coke requirements in North America and additional work on the first module. The Midwest Plant and East Chicago Tin are operated as part of Gary Works.

The Midwest Plant, located in Portage, Indiana, processes hot-rolled and cold rolled bands and produces tin mill products, hot dip galvanized, cold-rolled and electrical lamination sheets. Midwest facilities include a pickling line, two cold reduction mills, two temper mills, a double cold reduction mill, two annealing facilities, two hot dip galvanizing lines, a tin coating line and a tin-free steel line.

East Chicago Tin is located in East Chicago, Indiana and produces tin mill products. Facilities include a pickling line, a cold reduction mill, two annealing facilities, a temper mill, a tin coating line and a tin-free steel line.

Great Lakes Works, located in Ecorse and River Rouge, Michigan, has annual raw steel production capability of 3.8 million tons. Great Lakes facilities include three blast furnaces, two steelmaking vessels, a vacuum degassing unit, two slab casters, a hot strip mill, a pickling line, a tandem cold reduction mill, three annealing facilities, a temper mill, a recoil and inspection line, an electrolytic galvanizing line and a hot dip galvanizing line. Principal products include hot-rolled, cold-rolled and coated sheets.

Mon Valley Works consists of the Edgar Thomson Plant, located in Braddock, Pennsylvania; the Irvin Plant, located in West Mifflin, Pennsylvania; the Fairless Plant, located in Fairless Hills, Pennsylvania; and the Clairton Plant, located in Clairton, Pennsylvania. Mon Valley Works has annual raw steel production capability of 2.9 million tons. Facilities at the Edgar Thomson Plant include two blast furnaces, two steelmaking vessels, a vacuum degassing unit and a slab caster. Irvin Plant facilities include a hot strip mill, two pickling lines, a cold reduction mill, three annealing facilities, a temper mill and two hot dip galvanizing lines. The Fairless Plant operates a hot dip galvanizing line. Principal products from Mon Valley Works include hot-rolled, cold-rolled and coated sheets, as well as coke and coke by-products produced at the Clairton Plant.

The Clairton Plant is comprised of ten coke batteries. Almost all of the coke we produce is consumed by U. S. Steel facilities, or swapped with other domestic steel producers. Coke by-products are sold to the chemicals and raw materials industries. In the fourth quarter of 2012, we completed the construction of a technologically and environmentally advanced coke battery with capacity of 960,000 tons at the Clairton Plant.

Granite City Works, located in Granite City, Illinois, has annual raw steel production capability of 2.8 million tons. Granite City’s facilities include two coke batteries, two blast furnaces, two steelmaking vessels, two slab casters, a hot strip mill, a pickling line, a tandem cold reduction mill, a hot dip galvanizing line and a hot dip galvanizing/Galvalume® line. Granite City Works generally consumes all the coke it produces and sells coke by-products to the chemical and raw material industries. Principal products include hot-rolled and coated sheets. Gateway Energy and Coke Company LLC (Gateway) constructed a coke plant, which began operating in October 2009 to supply Granite City Works under a 15 year agreement. U. S. Steel owns and operates a cogeneration facility that utilizes by-products from the Gateway coke plant to generate heat and power.

Lake Erie Works, located in Nanticoke, Ontario, has annual raw steel production capability of 2.6 million tons. Lake Erie Works facilities include a coke battery, a blast furnace, two steelmaking vessels, a slab caster, a hot strip mill and three pickling lines. Principal products include slabs and hot-rolled sheets.

Fairfield Works, located in Fairfield, Alabama, has annual raw steel production capability of 2.4 million tons. Fairfield Works facilities included in Flat-rolled are a blast furnace, three steelmaking vessels, a vacuum degassing unit, a slab

19

Table of Contents

caster, a rounds caster, a hot strip mill, a pickling line, a cold reduction mill, two temper/skin pass mills, a hot dip galvanizing line and a hot dip galvanizing/Galvalume® line. Principal products include hot-rolled, cold-rolled and coated sheets, and steel rounds for Tubular.

Hamilton Works, located in Hamilton, Ontario, includes a coke battery, a pickling line, a cold reduction mill and two hot dip galvanizing lines and a galvanizing/galvannealing line. Principal products include cold-rolled and coated sheets. On December 31, 2013, U. S. Steel permanently shut down its iron and steelmaking facilities at Hamilton Works reducing Flat-rolled's annual raw steel capability by 2.3 million tons.

U. S. Steel owns a Research and Technology Center located in Munhall, Pennsylvania (near Pittsburgh) where we carry out a wide range of applied research, development and technical support functions.

U. S. Steel also owns an automotive technical center in Troy, Michigan. This facility brings automotive sales, service, distribution and logistics services, product technology and applications research into one location. Much of U. S. Steel’s work in developing new grades of steel to meet the demands of automakers for high-strength, light-weight and formable materials is carried out at this location.

U. S. Steel has iron ore pellet operations located at Mt. Iron (Minntac) and Keewatin (Keetac), Minnesota with annual iron ore pellet production capability of 22.4 million tons. During 2013, 2012 and 2011, these operations produced 21.7 million, 21.4 million and 21.1 million tons of iron ore pellets, respectively.

U. S. Steel has a 14.7 percent ownership interest in Hibbing Taconite Company (Hibbing), which is based in Hibbing, Minnesota. Hibbing’s rated annual production capability is 9.1 million tons of iron ore pellets, of which our share is about 1.3 million tons, reflecting our ownership interest. Our share of 2013, 2012, and 2011 production was 1.3 million, 1.4 million and 1.2 million tons, respectively.

U. S. Steel has a 15 percent ownership interest in Tilden Mining Company (Tilden), which is based in Ishpeming, Michigan. Tilden’s rated annual production capability is 8.7 million tons of iron ore pellets, of which our share is about 1.3 million tons, reflecting our ownership interest. Our share of 2013, 2012, and 2011 production was 1.2 million, 1.5 million and 1.4 million tons, respectively.

U. S. Steel participates in a number of additional joint ventures that are included in Flat-rolled, most of which are conducted through subsidiaries or other separate legal entities. All of these joint ventures are accounted for under the equity method. The significant joint ventures and other investments are described below. For information regarding joint ventures and other investments, see Note 9 to the Consolidated Financial Statements.

U. S. Steel and POSCO of South Korea participate in a 50-50 joint venture, ÁñÁ«ÊÓƵ-POSCO Industries (ÁñÁ«ÊÓƵ-POSCO), located in Pittsburg, California. The joint venture markets sheet and tin mill products, principally in the western United States. ÁñÁ«ÊÓƵ-POSCO produces cold-rolled sheets, galvanized sheets, tin plate and tin-free steel from hot bands principally provided by U. S. Steel and POSCO. ÁñÁ«ÊÓƵ-POSCO’s annual production capability is approximately 1.5 million tons.

U. S. Steel and Kobe Steel, Ltd. of Japan participate in a 50-50 joint venture, PRO-TEC Coating Company (PRO-TEC). PRO-TEC owns and operates two hot dip galvanizing lines and the CAL in Leipsic, Ohio, which primarily serve the automotive industry. PRO-TEC’s annual production capability is approximately 1.7 million tons. U. S. Steel supplies PRO-TEC with all of its requirements of cold-rolled sheets and markets all of its products. PRO-TEC constructed and financed the CAL that began operations during the first quarter of 2013. The CAL produces high strength, lightweight steels that are an integral component in automotive manufacturing as vehicle emission and safety requirements become increasingly stringent.

U. S. Steel and Severstal North America, Inc. (Severstal) participate in Double Eagle Steel Coating Company (DESCO), a 50-50 joint venture that operates an electrogalvanizing facility located in Dearborn, Michigan. The facility coats sheet steel with free zinc or zinc alloy coatings, primarily for use in the automotive industry. DESCO processes steel supplied by each partner and each partner markets the steel it has processed by DESCO. DESCO’s annual production capability is approximately 870,000 tons. During the second quarter of 2013, U. S. Steel and Severstal decided to dissolve DESCO. The dissolution could take up to two years as the joint venture will continue to service customers during that period. We do not expect a significant financial impact as a result of the dissolution.

U. S. Steel and ArcelorMittal participate in the Double G Coatings Company, L.P. 50-50 joint venture (Double G), a hot dip galvanizing and Galvalume® facility located near Jackson, Mississippi, which primarily serves the construction

20

Table of Contents

industry. Double G processes steel supplied by each partner and each partner markets the steel it has processed by Double G. Double G’s annual production capability is approximately 315,000 tons.

U. S. Steel and Worthington Industries, Inc. participate in Worthington Specialty Processing (Worthington), a joint venture with locations in Jackson, Canton and Taylor, Michigan in which U. S. Steel has a 49 percent interest. Worthington slits, cuts to length and presses blanks from steel coils to desired specifications. Worthington’s annual production capability is approximately 890,000 tons.

U. S. Steel and ArcelorMittal Dofasco, Inc. participate in Baycoat Limited Partnership (Baycoat), a 50-50 joint venture located in Hamilton, Ontario. Baycoat applies a variety of paint finishes to flat-rolled steel coils. Baycoat’s annual production capability is approximately 280,000 tons.

D.C. Chrome Limited, a 50-50 joint venture between U. S. Steel and The Court Group of Companies Limited, operates a plant in Stony Creek, Ontario which textures and chromium plates work rolls for Hamilton Works and for other customers, and grinds and chromes steel shafts used in manlifts.

Chrome Deposit Corporation (CDC), a 50-50 joint venture between U. S. Steel and Court Holdings, reconditions finishing work rolls, which require grinding, chrome plating and/or texturing. The rolls are used on rolling mills to provide superior finishes on steel sheets. CDC has seven locations across the United States, with all locations near major steel plants.

Feralloy Processing Company (FPC), a joint venture between U. S. Steel and Feralloy Corporation, converts coiled hot strip mill plate into sheared and flattened plates for shipment to customers. U. S. Steel has a 49 percent interest. The plant, located in Portage, Indiana, has annual production capability of approximately 275,000 tons.

U. S. Steel, along with Feralloy Mexico, S.R.L. de C.V. and Mitsui & Co. (USA), Inc., participates in a joint venture, Acero Prime, S.R.L. de CV (Acero Prime). U. S. Steel has a 40 percent interest. Acero Prime has facilities in San Luis Potosi, Ramos Arizpe and Toluca, Mexico. Acero Prime provides slitting, warehousing and logistical services. Acero Prime’s annual slitting capability is approximately 385,000 tons.

ÁñÁ«ÊÓƵE

ÁñÁ«ÊÓƵE consists of ÁñÁ«ÊÓƵK and its subsidiaries. Prior to January 31, 2012, ÁñÁ«ÊÓƵE also included ÁñÁ«ÊÓƵS and an equity investee. On January 31, 2012, ÁñÁ«ÊÓƵS and the interest in an equity investee, were sold. See Note 4 to the Consolidated Financial Statements for further details.

ÁñÁ«ÊÓƵK operates an integrated facility in Košice, Slovakia, which has annual raw steel production capability of 5.0 million tons. This facility has two coke batteries, three blast furnaces, four steelmaking vessels, a vacuum degassing unit, two dual strand casters, a hot strip mill, two pickling lines, two cold reduction mills, three annealing facilities, a temper mill, a temper/double cold reduction mill, three hot dip galvanizing lines, two tin coating lines, three dynamo lines, a color coating line and two spiral welded pipe mills. Principal products include hot-rolled, cold-rolled and coated sheets, tin mill products and spiral welded pipe. ÁñÁ«ÊÓƵK also has facilities for manufacturing heating radiators and refractory ceramic materials.

In addition, ÁñÁ«ÊÓƵK has a research laboratory, which, in conjunction with our Research and Technology Center, supports efforts in cokemaking, electrical steels, design and instrumentation, and ecology.

ÁñÁ«ÊÓƵS consisted of an integrated plant in Smederevo, Serbia, which had annual raw steel production capability of 2.4 million tons. Facilities at this plant included two blast furnaces, three steelmaking vessels, two slab casters, a hot strip mill, two pickling lines, a cold reduction mill, two annealing facilities, a temper mill and a temper/double cold reduction mill. Other facilities included a tin mill in Šabac with one tin coating line, a limestone mine in Kučevo and a river port in Smederevo, all located in Serbia. Principal products included hot-rolled and cold-rolled sheets and tin mill products.

Tubular

Tubular manufactures seamless and welded OCTG, standard pipe, line pipe and mechanical tubing.

Seamless products are produced at a facility located at Fairfield Works in Fairfield, Alabama, and at two facilities located in Lorain, Ohio. The Fairfield plant has annual production capability of 750,000 tons and is supplied with steel rounds from Flat-rolled’s Fairfield Works. The Fairfield plant has the capability to produce outer diameter (O.D.) sizes

21

Table of Contents

from 4.5 to 9.875 inches and has quench and temper, hydrotester, threading and coupling and inspection capabilities. The Lorain facilities have combined annual production capability of 780,000 tons and consume steel rounds supplied by Fairfield Works and external sources. Lorain #3 facility has the capability to produce O.D. sizes from 10.125 to 26 inches and has quench and temper, hydrotester, cutoff and inspection capabilities. Lorain #4 facility has the capability to produce O.D. sizes from 1.9 to 4.5 inches and has quench and temper, hydrotester, threading and coupling and inspection capabilities for OCTG casing and uses Tubular Processing in Houston for oil field production tubing finishing. In August of 2011, Lorain Tubular Operations commissioned its new #6 Mill quench and temper line, which is able to heat treat O.D. sizes from 2.375 to 7.625 inches, and also installed a complete high speed finishing facility and premium connection threading line.

Lone Star Tubular, located in Lone Star, Texas, manufactures welded OCTG, standard pipe, line pipe and mechanical tubing products. Lone Star Tubular #1 facility has the capability to produce O.D. sizes from 7 to 16 inches. Lone Star Tubular #2 facility has the capability to produce O.D. sizes from 1.088 to 7.15 inches. Both facilities have quench and temper, hydrotester, threading and coupling and inspection capabilities. Bellville Tubular Operations, in Bellville, Texas, manufactures welded tubular products primarily for OCTG with the capability to produce O.D. sizes from 2.375 to 4.5 inches and uses Tubular Processing in Houston for oil field production tubing finishing. Lone Star Tubular and Bellville Tubular Operations have combined annual production capability of 1.0 million tons and consume hot rolled bands from Flat-rolled’s facilities.

Welded products are also produced at a facility located in McKeesport, Pennsylvania. McKeesport Tubular Operations has annual production capability of 315,000 tons and consumes hot-rolled bands from Flat-rolled locations. This facility has the capability to produce, hydrotest, cut to length and inspect O.D. sizes from 8.625 to 20 inches.

Wheeling Machine Products manufactures couplings used to connect individual sections of oilfield casing and tubing. It produces sizes ranging from 2.375 to 20 inches at two locations: Pine Bluff, Arkansas, and Hughes Springs, Texas.

Tubular Processing, located in Houston, Texas, provides quench and temper and end-finishing services for oilfield production tubing. Offshore Operations, also located in Houston, Texas, provides threading, inspection, accessories and storage services to the OCTG market.

In December 2012, U. S. Steel and Butch Gilliam Enterprises LLC formed a new joint venture, Patriot Premium Threading Services located in Midland, Texas, which provides oil country threading, accessory threading, repair services and rig site services to exploration and production companies located principally in the Permian Basin.

U. S. Steel also has a 50 percent ownership interest in Apolo Tubulars S.A. (Apolo), a Brazilian supplier of welded casing, tubing, line pipe and other tubular products. Apolo’s annual production capability is approximately 150,000 tons.

U. S. Steel, POSCO and SeAH Steel Corporation, a Korean manufacturer of tubular products, participate in United Spiral Pipe LLC which owns and operates a spiral weld pipe manufacturing facility in Pittsburg, California with annual production capability of 300,000 tons. Its diameter size range is 24 to 60 inches. U. S. Steel and POSCO each hold a 35-percent ownership interest in the joint venture, with the remaining 30-percent ownership interest held by SeAH. During the fourth quarter of 2013, executive management gave the approval to begin to develop a strategy to terminate the Company's interest in United Spiral Pipe.

We have a 10,000 square foot Innovation & Technology Center in Houston, Texas. The complex houses exhibits for six areas of interest, an amphitheater, two conference rooms and a lab-themed meeting room. Designed to serve as a training and education center for both internal and external audiences, the facility hosts events such as customer lunch-and-learn sessions, industry association meetings and employee trainings.

Other Businesses

U. S. Steel’s Other Businesses include railroad services and real estate operations.

U. S. Steel owns the Gary Railway Company in Indiana; Lake Terminal Railroad Company and Lorain Northern Company in Ohio; Union Railroad Company and McKeesport Connecting Railroad Company in Pennsylvania; Fairfield Southern Company, Inc. located in Alabama; Delray Connecting Railroad Company in Michigan and Texas & Northern Railroad Company in Texas; all of which comprise U. S. Steel’s transportation business. On February 1, 2012, U. S. Steel completed the sale of the majority of operating assets of Birmingham Southern Railroad Company and the Port Birmingham Terminal. See Note 4 to the Consolidated Financial Statements for further information. McKeesport Connecting Railroad Company merged into Union Railroad Company effective January 1, 2013.

22

Table of Contents


U. S. Steel owns, develops and manages various real estate assets, which include approximately 200,000 acres of surface rights primarily in Alabama, Illinois, Maryland, Michigan, Minnesota and Pennsylvania. In addition, U. S. Steel participates in joint ventures that are developing real estate projects in Alabama, Maryland and Illinois. U. S. Steel also owns approximately 4,000 acres of land in Ontario, Canada, which could potentially be sold or developed.

Raw Materials and Energy

As an integrated producer, U. S. Steel’s primary raw materials are iron units in the form of iron ore pellets and sinter ore, carbon units in the form of coal and coke (which is produced from coking coal) and steel scrap. U. S. Steel’s raw materials supply strategy consists of acquiring and expanding captive sources of these primary raw materials and entering into flexible supply contracts for certain raw materials at competitive market prices which are subject to fluctuations based on market conditions at the time.

The amounts of such raw materials needed to produce a ton of steel will fluctuate based upon the specifications of the final steel products, the quality of raw materials and, to a lesser extent, differences among steel producing equipment. In broad terms, U. S. Steel estimates that it consumes about 1.4 tons of coal to produce one ton of coke and that it consumes approximately 0.4 tons of coke, 0.3 tons of steel scrap (40 percent of which is internally generated) and 1.3 tons of iron ore pellets to produce one ton of raw steel. At normal operating levels, we also consume approximately 6 mmbtu’s of natural gas per ton produced. While we believe that these estimates are useful for planning purposes, substantial variations occur. They are presented in order to give a general sense of raw material and energy consumption related to steel production.

Carbon Strategy

Our carbon strategy in North America is to achieve the lowest cost fuel rate to produce hot metal in our blast furnaces. We have made investments in new facilities at our Clairton Plant and Gary Works to become self-sufficient in coke and to eliminate the need to purchase merchant market coke. We have aggressively worked to adjust our coal blends that feed our coke batteries in order to use lower cost coals. We also have increased the natural gas injection capabilities on our blast furnaces to utilize the abundant supply of competitively priced natural gas to reduce costs. This strategy has improved our flexibility to use the lowest cost combination of coke, injection coal, and natural gas in our blast furnaces to achieve low cost fuel rates.

Iron Ore
Iron Ore Production(a) 

(a) Includes our share of production from Hibbing and Tilden.

The iron ore facilities at Minntac and Keetac contain an estimated 933 million short tons of recoverable reserves and our share of recoverable reserves at the Hibbing and Tilden joint ventures is 53 million short tons. Recoverable reserves are defined as the tons of product that can be used internally or delivered to a customer after considering mining and beneficiation or preparation losses. Minntac and Keetac’s annual capability and our share of annual capability for the Hibbing and Tilden joint ventures total approximately 25 million tons. Through our wholly owned operations and our

23

Table of Contents

share of joint ventures, we have adequate iron ore pellet production to cover a significant portion of our North American needs. Over the longer term, we are considering business strategies to leverage our significant iron ore position in the United States. We are considering an expansion of our iron ore pellet operations at our Keetac facility which would increase our production capability by approximately 3.6 million tons. The total cost of this project as currently conceived is broadly estimated to be approximately $820 million. Final permitting for the expansion was completed in December 2011. An extension to the construction air permit was granted during November 2013 that extends the permit until September 2014. Smaller projects are also being considered at Minntac and Keetac that could increase production in future years.

We sold a portion of our iron ore pellets in 2013 and 2012. Depending on our production requirements, inventory levels and other factors we may sell additional pellets in the future. Certain of our iron ore production facilities were temporarily idled due to the economic recession which resulted in lower production in 2009. One of our long-term contracts for the purchase of iron ore pellets expired in 2013. As of December 31, 2013, we have one remaining long-term contract for the purchase of iron ore pellets that expires in December 2014.

Substantially all of ÁñÁ«ÊÓƵE’s iron ore requirements are purchased from outside sources, primarily Russian and Ukrainian mining companies. However, in 2013 and prior years, ÁñÁ«ÊÓƵE has also received iron ore from U. S. Steel’s iron ore facilities in North America. We believe that supplies of iron ore, adequate to meet ÁñÁ«ÊÓƵE’s needs, are available at competitive market prices.

Coking Coal

All of U. S. Steel’s coal requirements for our cokemaking facilities are purchased from outside sources. U. S. Steel has entered into multi-year contracts for a portion of Flat-rolled’s coking coal requirements. Prices for these North American contracts for 2014 are set at what we believe are competitive market prices. Prices in subsequent years will be negotiated in accordance with contractual provisions on an annual basis at prevailing market prices or have fixed prices for a set time frame.

Prices for European contracts are negotiated at defined intervals (usually quarterly) with regional suppliers.

We believe that supplies of coking coal adequate to meet our needs are available from outside sources at competitive market prices. The main source of coking coal for North American Flat-rolled Products is the United States; and sources for ÁñÁ«ÊÓƵE include Poland, the Czech Republic, the United States, Russia and Ukraine.

Coke

In North America, the Flat-rolled segment operates cokemaking facilities at the Clairton Plant of Mon Valley Works, Gary Works, Granite City Works, Hamilton Works and Lake Erie Works. At our Granite City Works, we have a 15 year coke supply agreement with Gateway, which began in 2009. In Europe, the ÁñÁ«ÊÓƵE segment operates cokemaking facilities at ÁñÁ«ÊÓƵK. Blast furnace injection of coal, natural gas and self-generated coke oven gas is also used to reduce coke usage. The low coke production in 2009 was a result of the temporary idling of cokemaking facilities at the Clairton Plant, Granite City Works, Hamilton Works and Lake Erie Works for part of the year as well as the permanent shut down of three coke batteries at the Clairton Plant. In 2010, we restarted the facilities that were idled in 2009, resulting

24

Table of Contents

in an increase in coke production. In fourth quarter of 2013, we shut down two coke batteries at the Gary Works location. We have taken a number of steps to ensure long-term access to high quality coke for our blast furnaces as further described in “Item I. Business - Capital Projects and Other Investments.”

With Flat-rolled’s cokemaking facilities and the Gateway long-term supply agreement, it has the capability to be self-sufficient with respect to its annual coke requirements at normal operating levels. Coke is purchased from, sold to, or swapped with suppliers and other end-users to adjust for production needs and reduce transportation costs.

ÁñÁ«ÊÓƵE has the capability to be self-sufficient for coke at normal operating levels.

Steel Scrap and Other Materials

We believe that supplies of steel scrap and other alloy and coating materials required to fulfill the requirements for Flat-rolled and ÁñÁ«ÊÓƵE are available from outside sources at competitive market prices. Generally, approximately 40 percent of our steel scrap requirements are internally generated through normal operations.

Limestone

All of Flat-rolled’s limestone requirements are purchased from outside sources. We believe that supplies of limestone, adequate to meet Flat-rolled’s needs, are readily available from outside sources at competitive market prices.

ÁñÁ«ÊÓƵE’s limestone requirements are purchased from outside sources. We believe that supplies of limestone, adequate to meet ÁñÁ«ÊÓƵE’s needs, are available from outside sources at competitive market prices.

Zinc and Tin

We believe that supplies of zinc and tin required to fulfill the requirements for Flat-rolled and ÁñÁ«ÊÓƵE are available from outside sources at competitive market prices. We routinely execute fixed-price forward physical purchase contracts for a portion of our expected business needs in order to partially manage our exposure to the volatility of the zinc and tin markets.

Natural Gas

All of U. S. Steel’s natural gas requirements are purchased from outside sources.

We believe that adequate supplies to meet Flat-rolled’s needs are available at competitive market prices. We routinely execute fixed-price forward physical purchase contracts for natural gas to partially manage our exposure to natural gas price increases. During 2013, about 52 percent of our natural gas purchases in Flat-rolled were based on bids solicited on a monthly basis from various vendors; the remainder was made daily or with term agreements or with fixed-price forward physical purchase contracts.

We believe that adequate supplies to meet ÁñÁ«ÊÓƵE’s needs are normally available at competitive market prices.

Both Flat-rolled and ÁñÁ«ÊÓƵE use self-generated coke oven and blast furnace gas to reduce consumption of natural gas.

Industrial Gases

U. S. Steel purchases industrial gas under long-term contracts with various suppliers.

Commercial Sales of Product

U. S. Steel characterizes sales as contract sales if sold pursuant to an agreement with a defined volume and pricing and a duration of longer than three months, and as spot if sold without a defined volume and pricing agreement. In 2013, approximately 70 percent, 50 percent and 55 percent of sales by Flat-rolled, ÁñÁ«ÊÓƵE and Tubular, respectively, were contract sales. Some contract pricing agreements include fixed price while others are adjusted periodically based upon published prices of steel products or cost components. U. S. Steel does not consider sales backlog to be a meaningful measure since volume commitments in most contracts are based on each customer’s specific periodic requirements.



25

Table of Contents

Environmental Matters

U. S. Steel’s businesses in the United States are subject to numerous federal, state and local laws and regulations relating to the protection of the environment. These environmental laws and regulations include the Clean Air Act (CAA) with respect to air emissions; the Clean Water Act (CWA) with respect to water discharges; the Resource Conservation and Recovery Act (RCRA) with respect to solid and hazardous waste treatment, storage and disposal; and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) with respect to releases and remediation of hazardous substances. In addition, all states where U. S. Steel operates have similar laws dealing with the same matters. These laws are constantly evolving and becoming increasingly stringent. The ultimate impact of complying with existing laws and regulations is not always clearly known or determinable due in part to the fact that certain implementing regulations for these environmental laws have not yet been promulgated and in certain instances are undergoing revision. These environmental laws and regulations, particularly the CAA, could result in substantially increased capital, operating and compliance costs.
ÁñÁ«ÊÓƵC is subject to the environmental laws of Canada, which are comparable to environmental standards in the United States. Environmental regulation in Canada is an area of shared responsibility between the federal government and the provincial governments, which in turn delegate certain matters to municipal governments. Federal environmental statutes include the federal Canadian Environmental Protection Act, 1999 and the Fisheries Act. Various provincial statutes regulate environmental matters such as the release and remediation of hazardous substances; waste storage, treatment and disposal; and releases to air and water. As in the United States, Canadian environmental laws (federal, provincial and local) are undergoing revision and becoming more stringent.
ÁñÁ«ÊÓƵK is subject to the environmental laws of Slovakia and the EU. A related law of the EU commonly known as Registration, Evaluation, Authorization and Restriction of Chemicals, Regulation 1907/2006 (REACH) requires the registration of certain substances that are produced in or imported into the EU. Although ÁñÁ«ÊÓƵK is currently compliant with REACH, this regulation is becoming increasingly stringent. Slovakia is also currently considering a law implementing an EU Waste Framework Directive that would more strictly regulate waste disposal and increase fees for waste disposed of in landfills including privately owned landfills. The intent of the waste directive is to encourage recycling and because Slovakia has not adopted implementing legislation, we cannot estimate the full financial impact of this prospective legislation at this time.
The EU’s Industry Emission Directive will require implementation of EU determined best available techniques (BATs) to reduce environmental impacts as well as compliance with BAT associated emission levels. This directive includes operational requirements for air emissions, wastewater discharges, solid waste disposal and energy conservation, dictates certain operating practices and imposes stricter emission limits. Producers will be required to be in compliance with the iron and steel BAT by March 8, 2016, unless specific extensions are granted by the Slovak environmental authority. We are currently evaluating the costs of complying with BAT, but our most recent broad estimate of likely capital expenditures is $200 million to $250 million over the 2014 to 2016 period. This amount has been reduced from prior estimates due to the exclusion of a project to upgrade our boilers at the power plant, which is discussed separately below, and because we now believe we can comply with certain of the BAT parameters without capital investments due to improved maintenance and operating practices. We are currently investigating the possibility of obtaining EU grants to fund a portion of these capital expenditures. We also believe there will be increased operating costs, such as increased energy and maintenance costs, but we are currently unable to reliably estimate them.
Due to other EU legislation, we will be required to make changes to the boilers at our steam and power generation plant in order to comply with stricter air emission limits. In January of 2014, the operation of ÁñÁ«ÊÓƵK's boilers was approved by the EC as part of Slovakia's Transitional National Plan (TNP) for bringing all boilers in Slovakia into BAT compliance by no later than 2020. The TNP establishes parameters for determining the date by which specific boilers are required to reach compliance with the new air standards, which has been determined to be October 2017 for our boilers. This gives us the flexibility of delaying the completion of the project to upgrade our boilers to no later than that date, although we may choose to accelerate the implementation of this project in order to qualify for supplementary support payments as part of Slovakia's renewable energy program. This will result in a reduction in electricity costs once the project is completed. The current projected cost to reconstruct one existing boiler and build one new boiler to achieve compliance is broadly estimated at $150 million.
A Memorandum of Understanding was signed in March of 2013 between U. S. Steel and the government of Slovakia. The Memorandum of Understanding outlines areas in which the government and U. S. Steel will work together to help create a more competitive environment and conditions for ÁñÁ«ÊÓƵK. Some of the incentives the government of Slovakia agreed to provide include potential participation in a renewable energy program that provides the opportunity to reduce electricity costs as well as the potential for government grants and other support concerning investments in

26

Table of Contents

environmental control technology that may be required under the recently implemented BAT requirements. There are many conditions and uncertainties regarding the grants, including matters controlled by the EU, but the value could be as much as 75 million. In return, U. S. Steel agreed to achieve employment level reduction goals at ÁñÁ«ÊÓƵK only through the use of natural attrition, except in cases of extreme economic conditions, as outlined in ÁñÁ«ÊÓƵK's current collective labor agreement. U. S. Steel also agreed to pay the government of Slovakia specified declining amounts should U. S. Steel sell ÁñÁ«ÊÓƵK within five years of signing the Memorandum of Understanding.
U. S. Steel has incurred and will continue to incur substantial capital, operating and maintenance and remediation expenditures as a result of environmental laws and regulations, which in recent years have been mainly for process changes in order to meet CAA obligations and similar obligations in Europe and Canada. In the future, compliance with CO2 emission requirements may include substantial costs for emission allowances, restriction of production and higher prices for coking coal, natural gas and electricity generated by carbon based systems. Since it is difficult to predict what requirements will ultimately be imposed in the United States, Canada and Europe, it is difficult to estimate the likely impact on U. S. Steel, but it could be substantial. To the extent these expenditures, as with all costs, are not ultimately reflected in the prices of U. S. Steel’s products and services, operating results will be reduced. U. S. Steel believes that our major North American and many European integrated steel competitors are confronted with substantially similar conditions and thus does not believe that its relative position with regard to such competitors will be materially affected by the impact of environmental laws and regulations. However, if the final requirements do not recognize the fact that the integrated steel process involves a series of chemical reactions involving carbon that create CO2 emissions, our competitive position relative to mini mills will be adversely impacted. Our competitive position compared to producers in developing nations, such as China, Russia, Ukraine and India, will be harmed unless such nations require commensurate reductions in CO2 emissions. Competing materials such as plastics may not be similarly impacted. The specific impact on each competitor may vary depending on a number of factors, including the age and location of its operating facilities and its production methods. U. S. Steel is also responsible for remediation costs related to former and present operating locations and disposal of environmentally sensitive materials. Many of our competitors, including North American producers, or their successors, that have been the subject of bankruptcy relief have no or substantially lower liabilities for such matters.
GHG Emissions Regulation
The current and potential regulation of GHG emissions remains a significant issue for the steel industry, particularly for integrated steel producers such as U. S. Steel. The regulation of GHGs such as CO2 emissions has either become law or is being considered by legislative bodies of many nations, including countries where we have operating facilities. In the United States, the EPA has published rules for regulating GHG emissions for certain facilities and has implemented various reporting requirements as further described below.
In Utility Air Regulatory Group v. EPA, No. 11-1037 (consolidating various challenges); and Texas v. EPA, No. 10-1425, the U.S. Court of Appeals for the District of Columbia issued an opinion essentially upholding the EPA’s authority to regulate GHGs. The court rejected challenges to the endangerment finding, giving the EPA authority to regulate GHGs under the CAA on the basis that they pose a risk to human health. The court also rejected arguments by petitioners to dismiss inclusion of GHG emissions under the tailpipe rule, giving the EPA the authority to regulate GHG emissions from mobile sources and triggering regulation for stationary sources. The court dismissed challenges to the timing and tailoring rules citing that it lacked jurisdiction to decide the case on its merits since none of the petitioners had legal standing to challenge the timing and tailoring rules. Finally, the court declined to decide challenges to other State Implementation Plan (SIP) related rules issued by the EPA regarding GHGs, stating that it also lacked jurisdiction over these SIP related rules. The rules are being challenged in different tribunals.
The EU has established GHG regulations for the EU member states, while in Canada, a regulatory framework for GHG emissions has been published, details of which are discussed below. International negotiations to supplement and eventually replace the 1997 Kyoto Protocol are ongoing.
Since 2009, in Canada, the federal government has committed to reducing the country's total GHG emissions by 17 percent from 2005 levels by 2020. The Ontario government has committed to its own GHG emission reduction targets for the province. This plan announced GHG emission reduction targets of six percent below 1990 levels by 2014, 15 percent below 1990 levels by 2020 and 80 percent below 1990 levels by 2050. Both the federal and Ontario governments are currently seeking input from stakeholders, including industry, on the development of GHG emission reduction programs and, in addition, have expressed an intent to update limits on other emissions affecting air quality, with proposed implementation of the new limits beginning in 2015 through 2020.

27

Table of Contents

If federal or provincial GHG reduction legislation for the steel sector becomes law in Canada, it could have economic and operational consequences for U. S. Steel. At the present time, it is not possible to estimate the timing or impact of these or other future government actions on U. S. Steel.
The EPA has classified GHGs, such as CO2, as harmful gases. Under this premise, it has implemented a GHG emission monitoring and reporting requirement for all facilities emitting 25,000 metric tons or more per year of carbon dioxide, methane and nitrous oxide in CO2 equivalent quantities. In accordance with EPA GHG emissions reporting requirements, reports for the year 2012 were completed and submitted for all required facilities by the April 1, 2013 deadline. Consistent with prior year’s reporting, fourteen U. S. Steel facilities submitted reports including Gary Works, East Chicago Tin, Midwest Plant, Clairton Plant, Edgar Thomson Plant, Irvin Plant, Fairless Plant, Fairfield Sheet, Fairfield Tubular, Granite City Works, Great Lakes Works, Lorain Tubular, Minntac and Keetac. The Texas Operations is the only significant operation not required to report because its emissions were well below the 25,000 ton reporting threshold.
New requirements were adopted in 2011 related to monitoring and reporting of GHG emissions for vacuum degassing (decarburization), and methane emissions from on-site landfills. Facilities for which GHG emissions from decarburization were determined and reported included Gary Works, Great Lakes Works, and the Edgar Thomson Plant. Calculation of landfill methane emissions from U. S. Steel facilities were also completed this year. New provisions for incorporating electronic reporting of on-site landfill methane emissions were added in 2012 enabling those subject to the rule to report GHG emissions from on-site landfills starting in 2011.
In 2013, the EPA significantly expanded its reporting requirements to include inputs to the calculations that had previously been deferred. This meant that in addition to the 2012 reports, the 2010 and 2011 reports also had to be re-submitted for many of our facilities. New requirements were also imposed for the monitoring and reporting of GHG emissions from industrial landfills, including reporting specific categories and historical quantities of materials sent to our on-site landfills.
As with previous year’s reports, the EPA intends to make this information publicly available from all facilities.
Effective January 1, 2014, EPA revised the Global Warming Potentials (GWPs) of certain GHGs used in its monitoring and reporting program. The new GWPs agree with the most recent report by the Intergovernmental Panel on Climate Change. The revisions to the GWPs will change not only the amount of CO2 equivalent emissions reported but also potentially increase the number of facilities that are subject to the rule. As a result, some facilities that were exempted from reporting previously may now meet the 25,000 CO2 equivalent ton threshold and be required to report. U. S. Steel is currently determining what impact if any this would have on our own reporting requirements.
The EC has created an Emissions Trading System (ETS) and starting in 2013, the ETS began to employ centralized allocation, rather than national allocation plans, that are more stringent than the previous requirements. The ETS also includes a cap designed to achieve an overall reduction of GHGs for the ETS sectors of 21% in 2020 compared to 2005 emissions and auctioning as the basic principle for allocating emissions allowances, with some transitional free allocation provided on the basis of benchmarks for manufacturing industries under risk of carbon leakage. Manufacturing of sinter, coke oven products, basic iron and steel, ferro-alloys and cast iron tubes have all been recognized as exposing companies to a significant risk of carbon leakage, but the ETS is still expected to lead to additional costs for steel companies in Europe. The EU has imposed limitations under the ETS for the period 2013-2020 (Phase III) that are more stringent than those in NAP II, reducing the number of free allowances granted to companies to cover their CO2 emissions.
In September of 2013, the EC issued EU wide legislation further reducing the expected free allocation for Phase III by an average of approximately 12% for the Phase III period. The final allocation for the Phase III period that we received in January is approximately 48 million allowances. Based on 2013 emission intensity levels and projected future production levels and as a result of carryover allowances from the NAP II period, we do not currently expect to need to purchase credits until 2019 and currently estimate a shortfall of 14 million allowances for the Phase III period. However, due to a number of variable factors such as the future market value of allowances, future production levels and future emission intensity levels, we cannot reliably estimate the full cost of complying with the ETS regulations at this time.

During the year ended December 31, 2012, ÁñÁ«ÊÓƵK entered into transactions to sell a portion of its emission allowances and recognized a gain of $10 million. ÁñÁ«ÊÓƵK did not enter into any transactions to purchase, sell or swap CO2 emission allowances during 2013.


28

Table of Contents

For further information, see “Item 1A. Risk Factors,” “Item 3. Legal Proceedings – Environmental Proceedings” and “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Environmental Matters, Litigation and Contingencies.”

Air

The CAA imposes stringent limits on air emissions with a federally mandated operating permit program and civil and criminal enforcement sanctions. The CAA requires, among other things, the regulation of hazardous air pollutants through the development and promulgation of Maximum Achievable Control Technology (MACT) Standards. The EPA has developed various industry-specific MACT standards pursuant to this requirement. The CAA requires EPA to promulgate regulations establishing emission standards for each category of Hazardous Air Pollutants. EPA must also conduct risk assessments on each source category that is already subject to MACT standards and determine if additional standards are needed to reduce residual risks.

The principal impact of the MACT standards on U. S. Steel operations includes those that are specific to cokemaking, ironmaking, steelmaking and iron ore processing. In addition, in December 2012, the EPA reissued Boiler MACT regulations, which impose standards and limitations for fuels, including coke oven gas, used in boilers and process heaters and their resulting emissions at U. S. Steel facilities. On January 31, 2013, the Boiler MACT standards were finalized. U. S. Steel continues to evaluate the standards but can not estimate their impact at this time. Compliance with the Boiler MACT standards, with regards to fuel specifications or emission limits, is required within three years of the final published rule.

In September 2011, the EPA sent U. S. Steel’s integrated steel facilities Information Collection Requests for information regarding emissions from various iron and steel operations to be used in a new Iron and Steel MACT rule. The current or existing Iron and Steel MACT rule is subject to a legal challenge by the Sierra Club. In June 2010, the United States Court of Appeals for the District of Columbia Circuit granted the EPA’s motion for voluntary remand of the Iron and Steel MACT. As a result, while the existing standards are still in effect, the EPA anticipates promulgating new Iron and Steel MACT rules in response to the challenge by the Sierra Club. Because the EPA is currently reviewing industry information and data that it received pursuant to its information collection requests that would be used in determining the new standards, the anticipated impact of the new Iron and Steel MACT rules upon U. S. Steel cannot be estimated at this time. U. S. Steel continues to work with EPA on review and interpretation of the data collected.

U. S. Steel’s cokemaking facilities are subject to two categories of MACT standards. The first category applies to emissions from the pushing and quenching processes. The EPA was required to make a risk-based determination for pushing and quenching emissions, but is currently working on an Information Request to determine whether additional emissions reductions are necessary. The EPA expects to issue information collection requests in 2014 and anticipates a rule making in late 2015. Since the EPA has yet to publish or propose any residual risk standards for cokemaking facilities, the impact if any, on U. S. Steel cannot be estimated at this time. The second category of MACT standards pertaining to cokemaking facilities applies to emissions from charging, coke oven battery tops and coke oven doors. With regard to these standards, U. S. Steel chose to install more stringent controls than MACT standards require on some of its batteries, called Lowest Achievable Emissions Reductions (LAER). Such LAER batteries are not required to comply with certain residual risk standards until 2020. Because the scope of these anticipated changes are distant and relatively uncertain, the magnitude of the impact of these anticipated changes on U. S. Steel cannot be estimated at this time.

The CAA also requires the EPA to develop and implement National Ambient Air Quality Standards (NAAQS) for criteria pollutants, which include, among others, particulate matter – consisting of PM10 and PM2.5, lead carbon monoxide, nitrogen dioxide, sulfur dioxide, and ozone. In 1997, the EPA established 24-hour and annual standards for fine particles that are less than 2.5 micrometers in size and in 2006, the EPA tightened the 24-hour standard but retained the annual standard. In response to a legal challenge to the EPA’s 2006 PM2.5 rule making in which the U.S. Court of Appeals for the District of Columbia remanded the primary annual standard to the EPA, on December 14, 2012, the EPA lowered the annual standard for PM2.5 from 15 ug/m3 to 12 ug/m3, and retained the PM2.5 24-hour and PM10 NAAQS rules. U. S. Steel could face increased capital, operating and compliance costs related to reductions of PM2.5 from affected sources. At this time, the anticipated impacts on U. S. Steel cannot be estimated, because the EPA must first determine area designations by December 2014, which would become effective in early 2015. SIPs would be due to the EPA in 2018, and compliance with the standard would generally be required by 2020, with possible extensions to 2025.

States were required to demonstrate compliance with the 1997 fine particle standard by April 2010, unless the EPA granted the state or local jurisdiction an extension, which could be granted through April 2015. Many states and jurisdictions in which U. S. Steel operates received a five year extension, requiring that the area demonstrate compliance

29

Table of Contents

by April 2015. In addition, since the annual standard has been lowered, as disclosed in the remand noted above, some states may be required to modify their SIPs to meet the new standard, which could result in additional capital, operating and compliance costs to U. S. Steel.

On May 21, 2012, the EPA published a final rule designating certain areas, including some where U. S. Steel operates, as nonattainment with the 2008 ozone standard of 0.075 parts per million. As a result, states with areas designated as nonattainment (e.g. Pennsylvania) will need to revise their SIPs in a manner that will demonstrate that the area will meet the ozone NAAQS by the statutory deadline. The statutory deadline to demonstrate attainment is dependent upon whether the nonattainment designation is marginal, moderate, serious, severe, or extreme. U. S. Steel has begun working with the affected states to determine what reductions in nitrogen dioxides and volatile organic compounds from its sources may be necessary and appropriate for the area to demonstrate attainment. Because we are early in the SIP development process with the affected states, the impacts to U. S. Steel are not estimable at this time.

In 2010, the EPA retained the annual nitrogen dioxide NAAQS standard, but created a new 1-hour NAAQS and established new data reduction and monitoring requirements. While the EPA has classified all areas as being in attainment or unclassifiable, it is requiring implementation of a network of monitoring stations to assess air quality. Until the network is implemented and further designations are made, the impact on operations at U. S. Steel facilities cannot be estimated at this time.

Also in 2010, the EPA revised the primary sulfur dioxide standard by establishing a new 1-hour standard at a level of 75 parts per billion. In the rulemaking, the EPA also revoked the two previously existing primary standards of 140 parts per billion for 24-hour periods, and the annual standard of 30 parts per billion. On August 5, 2013, the EPA published final area designations, in which it designated some areas in which U. S. Steel operates as nonattainment with the 2010 sulfur dioxide NAAQS. The rule became effective October 4, 2013. U. S. Steel is working with states and regulatory authorities on developing SIPs that allow the states to demonstrate attainment with the standard by October 4, 2018. Because development of the SIPs is in the early stages, any impacts to U. S. Steel are not estimable at this time.

For additional information regarding significant enforcement actions, capital expenditures and costs of compliance, see “Item 3. Legal Proceedings – Environmental Proceedings” and “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Environmental Matters, Litigation and Contingencies.”

Water

U. S. Steel maintains discharge permits as required under the National Pollutant Discharge Elimination System (NPDES) program of the CWA, and conducts our operations to be in compliance with such permits. For additional information regarding enforcement actions, capital expenditures and costs of compliance, see “Item 3. Legal Proceedings – Environmental Proceedings” and “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Environmental Matters, Litigation and Contingencies.”
 
Solid Waste
 
U. S. Steel facilities generate solid and hazardous wastes regulated by RCRA. Each state also regulates solid and hazardous waste activities by local statute. In addition to regulating waste handling and disposal practices, these Federal and State statutes also regulate the environmental remediation of some prior waste disposal operations, the recycling of wastes and the operation and maintenance of waste storage tanks. RCRA Corrective Action, a mandatory remediation program required by Federal law and related to past waste disposal activities as well as State mandated programs similar to RCRA Corrective Action, are discussed below under “Remediation.” Slovakia is considering legislation implementing an EU Directive, which is expected to increase existing fees upon ÁñÁ«ÊÓƵK for the use of its landfill. Because the legislation has not yet been adopted, the impact on operations at ÁñÁ«ÊÓƵK facilities cannot be estimated at this time. For additional information regarding significant enforcement actions, capital expenditures and costs of compliance, see “Item 3. Legal Proceedings – Environmental Proceedings” and “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Environmental Matters, Litigation and Contingencies.”

Remediation

A significant portion of U. S. Steel’s currently identified environmental remediation projects relate to the remediation of former and present operating locations. A number of these locations are no longer owned or operated by U. S. Steel and are subject to cost sharing and remediation provisions in the sales agreements. Projects include remediation of

30

Table of Contents

the former Geneva Works, the former Duluth Works, ground water issues at Gary Works and the closure of hazardous and non-hazardous waste landfills.

U. S. Steel is also involved in a number of remedial actions under CERCLA, RCRA and other federal and state statutes, particularly third party waste disposal sites where disposal of U. S. Steel-generated material occurred, and it is possible that additional sites will be identified that require remediation. For additional information regarding remedial actions, capital expenditures and costs of compliance, see “Item 3. Legal Proceedings – Environmental Proceedings” and “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Environmental Matters, Litigation and Contingencies.”

Property, Plant and Equipment Additions

For property, plant and equipment additions, including capital leases, see “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Financial Condition, Cash Flows and Liquidity – Cash Flows” and Note 10 to the Consolidated Financial Statements.

Employees

As of December 31, 2013, U. S. Steel had approximately 26,000 employees in North America and approximately 12,500 in Europe.

Most hourly employees of U. S. Steel’s flat-rolled, tubular, cokemaking and iron ore pellet facilities in the United States are covered by collective bargaining agreements with the USW entered into effective September 1, 2012 (the 2012 Labor Agreements) that expire on September 1, 2015. The 2012 Labor Agreements provided for a $2,000 lump sum payment that was paid to each covered active USW member in October of 2012 and an additional lump sum payment of $500, to each covered USW member active on April 15, 2014. Employees will receive a 2 percent wage increase effective September 1, 2013 and a 2.5 percent wage increase effective January 1, 2015.

The 2012 Labor Agreements also provide for pension and other benefit adjustments for current and future retirees and modifications to the profit sharing plan beginning in 2013. See Note 16 to the Consolidated Financial Statements.

At ÁñÁ«ÊÓƵC, the collective bargaining agreement with the USW covering employees at Lake Erie Works expires in September 2018. The collective bargaining agreement with the USW covering employees at Hamilton Works expires in October 2014. All of our North American collective bargaining agreements contain no-strike provisions which are applicable during the term of the respective agreement.

In Europe, most represented employees at ÁñÁ«ÊÓƵK are represented by the OZ Metalurg union and are covered by an agreement that expires at the end of December 2014.

A small number of workers at some of our North American facilities and at our transportation operations are covered by agreements with the USW or other unions that have varying expiration dates.

Available Information

U. S. Steel’s Internet address is www.ussteel.com. We post our annual report on Form 10-K, our quarterly reports on Form 10-Q, our proxy statement and our interactive data files to our website as soon as reasonably practicable after such reports are filed with the Securities and Exchange Commission (SEC). We also post all press releases and earnings releases to our website.

All other filings with the SEC are available via a direct link on the U. S. Steel website to the SEC’s website, www.sec.gov.

Also available on the U. S. Steel website are U. S. Steel’s Corporate Governance Principles, our Code of Ethical Business Conduct and the charters of the Audit Committee, the Compensation & Organization Committee and the Corporate Governance & Public Policy Committee of the Board of Directors. These documents and the Annual Report on Form 10-K are also available in print to any shareholder who requests them. Such requests should be sent to the Office of the Corporate Secretary, ÁñÁ«ÊÓƵ, 600 Grant Street, Pittsburgh, Pennsylvania 15219-2800 (telephone: 412-433-2998).

U. S. Steel does not intend to incorporate into this document the contents of any website or the documents referred to in the immediately preceding paragraph.


31


Other Information

Information on net sales, depreciation, capital expenditures and income from operations by reportable segment and for Other Businesses and on net sales and assets by geographic area are set forth in Note 3 to the Consolidated Financial Statements.

For significant operating data for U. S. Steel for each of the last five years, see “Five-Year Operating Summary (Unaudited)” on pages F-60 and F-61.


32

Table of Contents

Item 1A. RISK FACTORS

Risk Factors Related to the Challenging Regional and Global Economic Conditions

All segments of our business continue to be impacted by the challenging economic conditions that began with the global economic recession in 2008. U. S. Steel cannot predict the duration of the difficult economic conditions and the trajectory of the recovery but both will have a significant impact on U. S. Steel both regionally and globally.

U. S. Steel and its end-product markets continue to be impacted by challenging economic and political conditions.

The global economic recession that began in 2008 resulted in significantly lower demand and decreased profitability across all of our segments and major markets. According to published sources, apparent steel consumption in the United States has shown slight improvement every year since 2009, and steel consumption in Canada had shown recovery every year until 2013, which saw a drop in consumption. For both countries, consumption remains below levels experienced in the period from 2003 to 2007, and neither country is expected to regain this level of steel consumption in 2014. In Europe, steel consumption has recovered at a slower pace and little, if any, improvement is forecasted for 2014.

While some of our end customer markets supplied by our Flat-rolled and ÁñÁ«ÊÓƵE segments saw modest recoveries during 2011, 2012 and 2013, others, such as construction, remain depressed. Our tubular business is heavily dependent upon the level of oil and natural gas drilling activity in the United States. Lower natural gas prices in 2012 and 2013 led to reduced drilling for natural gas. Since our Flat-rolled segment supplies the majority of the substrate used by our Tubular segment, any decrease in Tubular demand also adversely affects our Flat-rolled segment. Our operating levels and prices may remain at depressed levels until demand increases.

The ongoing EU sovereign debt crisis and economic declines in EU markets have affected product demand and prices for ÁñÁ«ÊÓƵE. Should conditions worsen in these markets, product demand and pricing may further deteriorate. While ÁñÁ«ÊÓƵE does not directly or indirectly hold any sovereign debt investments, dissolution and replacement of the euro currency and the potential reintroduction of individual EU currencies could further adversely impact ÁñÁ«ÊÓƵE and expose ÁñÁ«ÊÓƵE to increased foreign exchange risk.

Ongoing domestic fiscal issues have adversely affected product demand as many customers are deferring major capital investment projects until there is clear direction surrounding these uncertainties. The ultimate outcome of these matters may also adversely affect our costs.

Domestic monetary policy, particularly the quantitative easing and the suppression of interest rates by the Federal Reserve, can have significant impacts on U. S. Steel. An eventual increase in interest rates may increase our borrowing costs. Changes in monetary policy may also affect our customers and suppliers in ways that may be detrimental to U. S. Steel.

China and certain other steel markets were affected less by the global recession and have rebounded more quickly in some cases to, and even beyond 2008 levels. As a result, steel production serving these markets has increased, which has caused prices for iron ore, metallurgical coal and other raw materials to increase. This development has caused, and may continue to cause, our costs to increase regardless of the state of recovery in our end markets.

Global steel capacity has continued to increase, with some published sources estimating that steel capacity in China alone is at or nearing one billion metric tons per year. Increasing levels of global steel capacity relative to demand could lead to increased pressure to export excess production, increasing competition within the steel industry and lowering steel prices worldwide.

U. S. Steel may face increased risks of customer and supplier defaults.

As the economy continues to recover, our customers and suppliers have been forced to increase their working capital. We believe some of our customers and suppliers may not have sufficient credit available to them, which could reduce orders and delay payments from customers, resulting in increased customer defaults and cause our suppliers to delay filling, or to be unable to fill, our needs.




33

Table of Contents

U. S. Steel’s joint ventures and other equity investees are also being affected by ongoing challenging economic conditions.

U. S. Steel’s joint ventures and other equity affiliates are also engaged in the production of steelmaking, procurement of raw materials and finishing of flat-rolled and tubular products. As such, they face many of the same issues we do. Since these entities are smaller than U. S. Steel, they may have fewer resources available to them to respond to ongoing challenging economic conditions. Since the other participants in these joint ventures face many of the same issues, their ability to make capital contributions or do business with these ventures may also be reduced.

Risk Factors Concerning the Steel Industry

Worldwide overcapacity and excess supply in the steel industry may negatively affect the profitability of steel producers, including U. S. Steel.

The steel industry has historically been characterized by excess global capacity and supply, which has led to substantial price decreases during periods of economic recession. There has also been a pattern of worldwide capacity increases, which have been in excess of the growth in demand of steel products during periods when steel markets are stronger. Continued excess capacity, especially in developing, non-market economies such as China, will potentially result in an over-supply of steel causing downward pricing pressures, which may further reduce our domestic market share, profitability and financial results.

Imports of tubular products to the United States have continued to increase over the past several years. As foreign and other domestic producers increase their capacity and the availability of tubular products through importation and the construction of new manufacturing facilities in the United States, supply of certain energy related tubular products to the domestic markets we serve will increase and may adversely affect our market share, profit margins, operating results and financial position.

The steel industry is highly cyclical, which can potentially have an adverse effect on our operations.

Steel consumption is highly cyclical and generally follows economic and industrial conditions both worldwide and in regional markets. As the overall North American economy continues to recover, we have experienced shorter business cycles with durations measured in months rather than the traditional multi-year cycles. This volatility makes it difficult to balance the procurement of raw materials and energy with our steel production and customer product demand and can negatively impact our operations.

We face increased competition from alternative materials, which could impact the price of steel and adversely affect our profitability and cash flow.

As a result of increasingly stringent regulatory requirements, designers, engineers and industrial manufacturers, especially those in the automotive industry, are increasing their use of lighter weight and alternative materials, such as aluminum, composites, plastics and carbon fiber in their products. Increased government incentives and requirements for the use of such materials to meet regulatory requirements could reduce the demand for steel products, which could potentially reduce our profitability and cash flows.

Rapidly growing supply in China and other developing economies may grow faster than real demand in those economies, which may result in additional excess worldwide capacity and falling steel prices.

Over the last several years, steel consumption in China and other developing economies has increased at a rapid pace. Steel companies have responded by rapidly increasing steel production capability in those countries and published reports state that further capacity increases are likely. Steel production capability, especially in China, now appears to be well in excess of China’s home market demand. Because China is now the largest worldwide steel producer by a significant margin, any excess Chinese supply could have a major impact on world steel trade and prices if this excess and subsidized production is exported to other markets. Since the Chinese steel industry is largely government owned, it has not been as adversely impacted by the ongoing difficult economic conditions, and it can make production and sales decisions for non-market reasons.





34

Table of Contents

Increased imports of steel products into North America and Europe could negatively affect steel prices and demand levels and reduce our profitability.

Steel sheet imports to the United States accounted for an estimated 14 percent of the U.S. steel sheet market in 2013, 14 percent in 2012 and 13 percent in 2011. Imports of energy related tubular products to the United States remain at high levels and accounted for an estimated 49 percent of the U.S. tubular market in 2013, 52 percent in 2012 and 47 percent in 2011. Foreign competitors may have lower labor costs, and some are owned, controlled or subsidized by their governments, which allows their production and pricing decisions to be influenced by political and economic policy considerations as well as prevailing market conditions.

Imports of flat-rolled steel to Canada accounted for an estimated 36 percent of the Canadian market for flat-rolled steel products in 2013, 34 percent in 2012 and 35 percent in 2011.

Total imports of flat-rolled carbon steel products to the EU27 (the 27 countries currently comprising the EU) were 14 percent of the EU market in 2013, 13 percent in 2012 and 17 percent in 2011.

Increases in future levels of imported steel to North America and Europe could reduce future market prices and demand levels for steel products produced in those markets.

We have been and continue to be adversely affected by violations of international trade laws.

Imports into the United States, Canada and the EU have often violated the international trade laws of these jurisdictions. While in some cases, U. S. Steel and others have been successful in obtaining relief under these laws, in other circumstances, relief has been denied. When received, such relief is generally subject to automatic or discretionary review, rescission or reduction. There can be no assurance that any such relief will be obtained or continued in the future or that such relief as obtained will be adequate. Since the DOC is a cabinet level department and the ITC is headed by Commissioners nominated by the President and confirmed by the Senate, there may be political factors that reduce the level of protection against violation of international trade laws. There is also a risk that international bodies such as the World Trade Organization or judicial bodies in the United States, Canada or the EU may change their interpretations of these laws in ways unfavorable to U. S. Steel.

Limited availability of raw materials and energy may constrain operating levels and reduce profit margins.

U. S. Steel and other steel producers have periodically been faced with problems in obtaining sufficient raw materials and energy in a timely manner due to delays, defaults or force majeure events by suppliers, shortages or transportation problems (such as shortages of barges, ocean vessels, rail cars or trucks, or disruption of rail lines, waterways or natural gas transmission lines), resulting in production curtailments. As a result, we may be exposed to risks concerning pricing and availability of raw materials from third parties. As other areas of the world have recovered faster than North America and Europe, raw materials demand and prices have increased. ÁñÁ«ÊÓƵE purchases substantially all of its iron ore and coking coal requirements from outside sources. ÁñÁ«ÊÓƵE is also dependent upon availability of natural gas produced in Russia and transported through Ukraine. Any curtailments and escalated costs may further reduce profit margins.

If demand is such that our blast furnaces are at full production capacity, we may become dependent upon outside purchased coke, especially if some of our existing coke facilities produce at less than capacity.

Environmental compliance and remediation could result in substantially increased capital requirements and operating costs.

Steel producers in the United States, along with their customers and suppliers, are subject to numerous federal, state and local laws and regulations relating to the protection of the environment. Steel producers in Canada and the EU are also subject to similar laws. These laws continue to evolve and are becoming increasingly stringent. The ultimate impact of complying with such laws and regulations is not always clearly known or determinable because regulations under some of these laws have not yet been promulgated or are undergoing revision. Environmental laws and regulations, particularly the CAA, could result in substantially increased capital, operating and compliance costs.

International environmental requirements vary. While standards in the EU, Canada and Japan are generally comparable to U.S. standards, other nations, particularly China, have substantially lesser requirements that may give competitors in such nations a competitive advantage.



35

Table of Contents

GHG policies could negatively affect our results of operations and cash flows.

The integrated steel process involves a series of chemical reactions involving carbon that create CO2. This distinguishes integrated steel producers from mini-mills and many other industries where CO2 generation is generally linked to energy usage. In the United States, the EPA has published rules for regulating GHG emissions for certain facilities and has implemented various reporting requirements. In a previous Congressional session, legislation regulating CO2 emissions was passed in the House of Representatives and introduced in the Senate. We do not know what action, if any, may be taken by the current or future sessions of Congress. The EU has established GHG regulations and Canada has published details of a regulatory framework for GHG emissions. For a discussion of these, see “PART I – Business – Environmental Matters.” We cannot predict the final requirements that may be adopted in the United States and Canada, or the form of future actions that may be taken by the EU; however, such actions could entail substantial costs for emission allowances, restriction of production and higher prices for coking coal, natural gas and electricity generated by carbon based systems. This could have a negative effect on results of our operations and cash flows. Since mini-mill production does not involve the same chemical reactions as integrated production, mini-mills may have a competitive advantage. Additionally, since China and many other developing nations have not instituted GHG regulations, and since past international agreements such as the Kyoto Protocol provided exemptions and lesser standards for developing nations, we may be at a competitive disadvantage with certain foreign steel producers. Many of our customers in the United States, Canada and Europe may experience similar impacts, which could result in decreased demand and lower prices for our products.

Risk Factors Concerning U. S. Steel Legacy Obligations

Our retiree health care and retiree life insurance plan costs, most of which are unfunded obligations, and our pension plan costs in North America are higher than those of many of our competitors. These plans create a competitive disadvantage and negatively affect our results of operations and cash flows.

We maintain retiree health care and life insurance and defined benefit pension plans covering many of our North American employees and former employees upon their retirement. As of December 31, 2013, approximately 136,000 current employees, retirees and beneficiaries are participating in the plans to receive pension and/or healthcare and life insurance benefits. At December 31, 2013, on an accounting basis, U. S. Steel’s retiree medical and life insurance plans were underfunded by $1.4 billion and our pension plans were underfunded by $1.1 billion.

Most of our employee benefits are subject to collective bargaining agreements and will be subject to future negotiations. About two thirds of our costs for the domestic USW participants’ retiree health benefits in the Company’s main domestic other benefit plan are limited to a per capita dollar maximum calculation based on 2006 base year actual costs incurred under the main U. S. Steel benefit plan for USW participants (cost cap). The Company should begin to realize the full benefit of the cost cap after 2015. If the cost cap was not in place, our accumulated postretirement benefit obligation for our other benefit plans could increase by $1.1 billion.

Minimum contributions to domestic qualified pension plans (other than contributions to the Steelworkers Pension Trust (SPT) described below) are regulated under the Employee Retirement Income Security Act of 1974 (ERISA) and the Pension Protection Act of 2006 (PPA). Minimum contributions to ÁñÁ«ÊÓƵC pension plans are governed by an agreement entered into by Stelco Inc. (Stelco) and the Province of Ontario that U. S. Steel assumed in conjunction with the acquisition of Stelco (Agreement). The Agreement requires ÁñÁ«ÊÓƵC to fund annually a C$70 million flat dollar contribution plus special contributions for cost of living adjustments (COLA) indexing and other amendments adopted since 2006 for the four main ÁñÁ«ÊÓƵC pension plans through 2015. After this time, the minimum contribution requirements for ÁñÁ«ÊÓƵC’s plans are subject to provincial rules for funding defined benefit plans which generally require the funding of solvency deficiencies over a five year period. This may require significantly more annual contributions than is currently required under the Agreement.

Assets held by the trusts for our pension plans and our trust for retiree health care and life insurance benefits are subject to the risks, uncertainties and variability of the financial markets. Additionally, certain corporate bond rates are utilized in determining the discount rate used to measure our pension and other benefit obligations for both U.S. GAAP and funding purposes. Companies which offer defined benefit pension plans such as U. S. Steel are exposed to interest rate risk. The Federal Reserve Board has continued to suppress interest rates in an attempt to stimulate the broader American economy, which has had the direct effect of lowering the bond rates used in the determination of the appropriate discount rate to measure U. S. Steel's pension liability. While interest rates on bonds have generally increased over the last twelve months, they remain well below levels seen before the 2009 recession which will have the effect of increasing U. S. Steel's pension liabilities and at the same time reducing fixed income asset returns.


36

Table of Contents

The level of cash funding for our defined benefit pension plans in future years depends upon various factors including voluntary contributions that we may make, future pension plan asset performance, actual interest rates under the law, and the impacts of business acquisitions or divestitures, union negotiated benefit changes and future government regulations, many of which are not within our control.

If there is significant underfunding of the obligations under our defined benefit pension plans, U. S. Steel may be required, or may choose to make substantial contributions to these plans, which may divert committed capital to satisfy funding requirements related to these obligations and delay or cancel capital projects that we believe would increase our ability to meet our customers’ needs as well as improve our profitability.

U. S. Steel contributes domestically to a multiemployer defined benefit pension plan, the SPT, for USW-represented employees formerly employed by National Steel and represented employees hired after May 2003. We have legal requirements for future funding of this plan should the SPT become significantly underfunded or we decide to withdraw from the plan. Either of these scenarios may negatively impact our future cash flows. The 2012 Labor Agreements with the USW require a contribution rate of $2.65 per hour for most steelworker employees. Collectively bargained company contributions to the plan could increase as a result of future changes agreed to by the Company and the USW.

Domestic health care costs are expected to increase in future years due to the ever rising cost of medical products and services, which is attributable to medical and pharmacological advances as well as the increased cost of compliance with regulatory requirements. In addition, the overall impact of the Patient Protection and Affordable Care Act of 2010 on the costs of large employer medical plans remain uncertain and subject to change. These may adversely affect our results of operations and cash flow. Benefit obligations under our plans are not tied to operating rates or financial results; therefore, our costs do not change to reflect general economic conditions.

Many domestic and international competitors do not provide retiree health care and life insurance or defined benefit pension plans to their employees. Many other international competitors operate in jurisdictions with government sponsored retirement and health care plans that may offer them a cost advantage.

We have higher environmental remediation costs than our competitors. This may create a competitive disadvantage and negatively affect our results of operations and cash flows.

Some of U. S. Steel’s facilities were in operation before 1900. Although management believes that U. S. Steel’s environmental practices have either led the industry or at least been consistent with prevailing industry practices, hazardous materials may have been released at current or former operating sites or delivered to sites operated by third parties. This means U. S. Steel is responsible for remediation costs associated with the disposal of such materials and many of our competitors do not have similar historical liabilities.

U. S. Steel is involved in numerous remediation projects at currently operating facilities, facilities that have been closed or sold to unrelated parties and other sites where material generated by U. S. Steel was deposited. In addition, there are numerous other former operating or disposal sites that could become the subject of remediation. For example, we recorded a charge of $32 million in 2013 related to the St. Louis Estuary and Upland project in Duluth, Minnesota.

Environmental remediation costs and related cash requirements of many of our competitors may be substantially less than ours. Many international competitors do not face similar laws in the jurisdictions where they operate. Many U.S. competitors have substantially shorter operating histories than we do, resulting in less exposure for environmental remediation. Competitors that have obtained relief under bankruptcy laws have been released from certain environmental obligations that existed prior to their bankruptcy filings.

We may be unable to obtain and renew permits necessary for our operations and planned projects such as those needed for our ore mining operations. We could also face permit and approval requirements that delay or otherwise adversely affect our operations and planned projects. Any such delays or failures could impact our steel production, cash flows, and profitability.

Before we can begin construction of new facilities, start mining or expand our mining operations into certain areas, we must obtain approval from the appropriate regulatory agencies. The requirements to meet the regulatory authorities’ standards may be costly and time-consuming and may delay planned capital projects or commencement of operations at our various production facilities.


37

Table of Contents

Other Risk Factors Applicable to U. S. Steel

Unplanned equipment outages and other unforeseen disruptions may reduce our results of operations.

Our steel production depends on the operation of critical structures and pieces of equipment, such as blast furnaces, casters, hot strip mills and various structures and operations that support them. It is possible that we could experience prolonged periods of reduced production and increased maintenance and repair costs due to equipment failures at our facilities or those of our key suppliers. It is also possible that operations may be disrupted due to other unforeseen circumstances such as power outages, explosions, fires, floods, accidents and severe weather conditions. We are also exposed to similar risks involving major customers and suppliers such as force majeure events of raw materials suppliers that have occurred and may occur in the future. Availability of raw materials and delivery of products to customers could be affected by logistical disruptions, such as shortages of barges, ocean vessels, rail cars or trucks, or unavailability of rail lines or of locks on the Great Lakes or other bodies of water. To the extent that lost production could not be compensated for at unaffected facilities and depending on the length of the outage, our sales and our unit production costs could be adversely affected.

We may be adversely impacted by volatility in prices for raw materials, energy, and steel.

In 2013, approximately 70 percent of U. S. Steel’s Flat-rolled segment sales in the United States are based on sales contracts with volume commitments and durations of at least one quarter, while lesser percentages of Tubular and ÁñÁ«ÊÓƵE segment sales are made pursuant to such contracts. These contracts generally have a fixed price or a price that will fluctuate with changes in a defined index and do not always have firm volume commitments. During periods of rapid escalation of raw materials, energy and other costs, U. S. Steel may not be able to recover these cost increases from customers with existing fixed price agreements. Conversely, some purchase contracts require annual commitments, or we may elect to make multi-year commitments, and in periods of rapid decline, U. S. Steel may be faced with having agreed to purchase raw materials and energy at prices that are above the then current market price or in greater volumes than required. If steel prices decline, our profit margins on market-based indexed contracts and spot business will be reduced.

Declines in the production levels of our major customers could have an adverse effect on our financial position, results of operations and cash flows.

We sell to the automotive, service center, converter, energy and appliance and construction-related industries, all of which have been significantly impacted by the ongoing challenging economic conditions. Low demand from customers in these key markets may adversely affect our results of operations.

We face risks concerning innovation, new technologies, products and increasing customer requirements.

Technologies such as direct iron reduction and carbon substitution may be more cost effective than our current production methods. However, we may not have sufficient capital to invest in such technologies and may, from time to time, incur cost over-runs and difficulties adapting and fully integrating these technologies into our existing operations. We may also encounter control or production restrictions, or not realize the cost benefit from such capital intensive technology adaptations to our current production processes. Customers such as the automotive industry are demanding stronger and lighter products. Tubular customers are increasingly requesting pipe producers to supply connections and other ancillary parts as well as inspection and other services. We may not be successful in meeting these technological challenges and there may be increased liability exposures connected with the supply of additional products and services.

Product liability claims could have an adverse effect on our financial position, results of operations and cash flows.

Events such as well failures, line pipe leaks, blowouts, bursts, fires and product recalls could result in claims that our products or services were defective and caused death, personal injury, property damage or environmental pollution. The insurance we maintain may not be adequate, available to protect us in the event of a claim, or its coverage may be limited, canceled or otherwise terminated, or the amount of our insurance may be less than the related impact on our enterprise value after a loss.

The terms of our indebtedness contain provisions that may limit our flexibility.

The Amended Credit Agreement is secured by a lien on a majority of our domestic inventory and certain of our accounts receivable and includes a fixed charge coverage ratio covenant that applies to the most recent four consecutive quarters

38

Table of Contents

when availability under the Amended Credit Agreement is less than the greater of 10% of the total aggregate commitments and $87.5 million. The value or levels of inventory may decrease or we may not be able to meet this covenant in the future, and either or both of these situations would limit our ability to borrow under the Amended Credit Agreement.

In addition, beginning on February 13, 2014 and extending until the repayment or conversion of the $322 million of 4.00% senior convertible notes, we must maintain minimum liquidity (as further defined in the Amended Credit Agreement) of at least $175 million. We have granted the lenders under the Amended Credit Agreement a secured position in our most liquid assets, which may be a detriment to other creditors.

We also have a Receivables Purchase Agreement (RPA) that provides liquidity depending on the amount of eligible domestic trade accounts receivables. Reductions in eligible accounts receivable would reduce the amount of receivables available for sale.

The Amended Credit Agreement, our Senior Convertible Notes issued in 2009 and our $2.6 billion of Senior Notes also contain covenants limiting our ability to create liens and engage in sale-leasebacks. Additionally, the repayment of amounts outstanding under the Amended Credit Agreement and repurchase of the Senior Convertible Notes and Senior Notes is required upon a change of control under specified circumstances, as well as other customary provisions. The Amended Credit Agreement, the Senior Convertible Notes and the RPA have provisions that certain defaults under a material debt obligation could cause a default under the Amended Credit Agreement or the Senior Convertible Notes or termination of the RPA. These terms may affect our liquidity, our ability to operate our business and may limit our ability to take advantage of potential business opportunities.

The €200 million revolving credit facility agreement (the Credit Agreement) contains certain ÁñÁ«ÊÓƵK financial covenants (as further defined in the Credit Agreement), including maximum Leverage, maximum Net Debt to Tangible Net Worth, and minimum Interest Cover ratios. The covenants are measured semi-annually for the period covering the last twelve calendar months. ÁñÁ«ÊÓƵK may not draw on the Credit Agreement if it does not comply with any of the financial covenants until the next measurement date. Failure to meet any of the financial covenants at any measurement date shall not be considered an event of default if at that measurement date, no loan was outstanding.

At December 31, 2013, in the event of a change in control of U. S. Steel, holders of U. S. Steel debt obligations totaling approximately $3.2 billion, which includes the Senior Notes and the Senior Convertible Notes, may require U. S. Steel to repurchase such obligations in whole or in part for cash at a price equal to 100 percent of the principal amount plus accrued and unpaid interest. In such an event, U. S. Steel may also be required to either repurchase the leased Fairfield caster for $39 million, or provide a letter of credit to secure the remaining obligation.

We face substantial debt maturities.

Over the next six years, we have $1.9 billion of debt maturing (see Note 14 to the Consolidated Financial Statements). We may not be able to refinance this debt or may be forced to do so on terms substantially less favorable to U. S. Steel than our currently outstanding debt. We may be forced to delay or not make capital expenditures, which may adversely affect our competitive position and financial results.

Rating agencies may downgrade our credit ratings, which would make it more difficult for us to raise capital and would increase our financial costs.

Any downgrades in our credit ratings may make raising capital more difficult, may increase the cost and affect the terms of future borrowings, may affect the terms under which we purchase goods and services and may limit our ability to take advantage of potential business opportunities.

“Change in control” clauses in our financial and labor agreements grant the other parties to those agreements rights to accelerate obligations and to terminate or extend our labor agreements.

Upon the occurrence of “change in control” events specified in our Senior Notes, Amended Credit Agreement, Senior Convertible Notes and various other contracts and leases, the holders of our indebtedness may require us to immediately repurchase or repay that debt on less than favorable terms. Additionally, the 2012 Labor Agreements give the USW the right to either terminate the collective bargaining agreement or extend it for an additional three years. Among other things, these provisions may make a takeover of U. S. Steel more difficult.


39

Table of Contents

A “change of control” is generally defined to include any of the following: (a) the acquisition by a person or group of at least 35 percent of our common stock, (b) a merger in which holders of our common stock own less than a majority of the equity in the resulting entity, or (c) replacement of a majority of the members of our Board of Directors by persons who were not nominated by our current directors.

Our operations expose us to uncertainties and risks in the countries in which we operate, which could negatively affect our results of operations, cash flows and liquidity.

Our U.S. operations are subject to economic conditions, including credit and capital market conditions, and political factors in the United States, which if changed could negatively affect our results of operations, cash flows and liquidity. Political factors include, but are not limited to, taxation, inflation, increased regulation, limitations on exports of energy and raw materials, and trade remedies. Actions taken by the U.S. government could affect our results of operations, cash flows and liquidity.

ÁñÁ«ÊÓƵK, located in Slovakia and ÁñÁ«ÊÓƵC, located in Canada, constitute 28 percent of our global raw steel production capability. Both of them are subject to economic conditions, including credit and capital market conditions, and political factors in the countries in which they are located, and ÁñÁ«ÊÓƵK is subject to economic conditions and political factors associated with the EU and the euro currency. Changes in any of these economic conditions or political factors could negatively affect our results of operations, cash flows and liquidity. Political factors include, but are not limited to, taxation, nationalization, inflation, government instability, civil unrest, increased regulation and quotas, tariffs and other protectionist measures. An example of such a change is the increase of the Slovak corporate tax rate from 19% to 23% effective January 1, 2013, followed by a decrease to 22% effective January 1, 2014.

Any future foreign acquisitions or expansions could expose us to similar risks.

U. S. Steel has incurred and may incur in the future, facility carrying costs when production capacity is idled, increased costs to resume production at idled facilities, or costs to idle facilities.

Our decisions concerning what facilities to operate and at what levels are made based upon our customers’ orders for products as well as the capabilities and cost performance of our locations. In depressed markets such as those experienced in the recent recession, we concentrated production operations at several plant locations and did not operate others in response to customer demand.

When we restart idled facilities, we incur costs to replenish raw material inventories, prepare the previously idled facilities for operation, perform the required repair and maintenance activities and prepare employees to return to work safely and resume production responsibilities.

Faced with temporary or structural overcapacity in various markets, we may in the future seek to rationalize operations through asset sales, temporary shutdowns or closures of facilities. As is the case with our Canadian operations, we are permanently shutting down the iron and steelmaking facilities at the Hamilton Works which has resulted in a charge of $237 million in 2013. Future initiatives may lead to significant costs or charges.

We are subject to significant foreign currency risks, which could negatively impact our profitability and cash flows.

Our foreign operations accounted for approximately 25 percent of our net sales in 2013. The financial condition and results of operations of ÁñÁ«ÊÓƵK and ÁñÁ«ÊÓƵC are reported in various foreign currencies and then translated into U.S. dollars at the applicable exchange rates for inclusion in our financial statements. The appreciation of the U.S. dollar against these foreign currencies could have a negative impact on our consolidated results of operations.

In addition, international cash requirements have been and in the future may be funded by intercompany loans, creating intercompany monetary assets and liabilities in currencies other than the functional currencies of the entities involved, which can have a non-cash impact on income when they are remeasured at the end of each period.

If Slovakia or the EU abandons the euro, or if one or more members withdraw, the re-introduction of individual currencies would expose us to foreign exchange rate risks for each currency. Any future foreign acquisitions or expansions may increase such risks.




40

Table of Contents

Financial regulatory frameworks introduced by American and EU regulators may limit our financial flexibility or increase our costs.

The Commodity Future Trading Commission’s Dodd Frank and the EU’s EMIR regulatory frameworks may limit our company’s ability to hedge interest rate, FX, or commodity pricing exposures, which could exposure us to increased economic risk. These frameworks may introduce additional compliance costs to corporations such as U. S. Steel. Some counterparties may cease hedging as a result of increased regulatory cost burdens, which in turn may reduce U. S. Steel’s ability to hedge its interest rate, FX, or commodity exposures. Legislative uncertainty exists regarding possible margin requirements and clearing practices that could economically impact U. S. Steel. If additional liquidity is required under regulatory frameworks to support new margin requirements, these concepts could reduce U. S. Steel’s liquidity available to invest in its core business operations.

The IRS could disallow all or part of a worthless stock loss and bad debt deduction taken in 2013.

U. S. Steel will make an election effective December 31, 2013 to liquidate for U.S income tax purposes a foreign subsidiary that holds most of the Company’s international operations. The tax liquidation will allow the Company to claim a worthless stock loss and bad debt deduction in its 2013 U.S. income tax return, resulting in a net income tax benefit in the fourth quarter of 2013 of $392 million. The worthless stock loss and bad debt deduction may be subject to audit and adjustment by the IRS, which could result in the reversal of all or part of the income tax benefit or an increase in the tax benefit. If the IRS rejects or reduces the amount of the income tax benefit related to the worthless stock loss and bad debt deduction, U. S. Steel may have to pay additional cash income taxes which could adversely affect our results from operations, financial condition and cash flows.

Our business requires substantial expenditures for debt service obligations, capital investments, operating leases and maintenance that we may be unable to fund.

With $3.6 billion of long-term debt outstanding as of December 31, 2013, we have significant debt service requirements.

Our operations are capital intensive. For the five-year period ended December 31, 2013, total capital expenditures were $3.2 billion. At December 31, 2013, our contractual commitments to acquire property, plant and equipment totaled $151 million and we were obligated to make aggregate lease payments of $300 million under operating leases.

In addition to capital expenditures and lease payments, we spend significant amounts for maintenance of our raw material, iron and steelmaking and steel-finishing facilities.

As of December 31, 2013, we had contingent obligations consisting of indemnity obligations under active surety bonds, trusts and letters of credit totaling approximately $166 million and contractual purchase commitments, including “take or pay” arrangements, totaling approximately $8.5 billion.

Our business may not generate sufficient operating cash flow or external financing sources may not be available in amounts sufficient, to enable us to service or refinance our indebtedness or to fund capital expenditures and other liquidity needs. The limitations under our Amended Credit Agreement and RPA, described above, may limit our availability to draw upon these facilities.

U. S. Steel is exposed to uninsured losses.

Our insurance coverage against catastrophic casualty and business interruption exposures contains certain common exclusions, substantial deductibles and self insured retentions.

Our collective bargaining agreements may limit our flexibility.

Most hourly employees of U. S. Steel’s flat-rolled, tubular, cokemaking and iron ore pellet facilities in the United States are covered by the 2012 Labor Agreements, which expire on September 1, 2015. These agreements contain provisions that prohibit us from pursuing any North American transaction involving steel or steel-related assets without the consent of the USW, grant the USW a right to bid on any sale of one or more facilities covered by the 2012 Labor Agreements, require us to make reasonable and necessary capital expenditures to maintain the competitive status of our domestic facilities and require mandatory pre-funding of a trust for retiree health care and life insurance. These agreements also restrict our ability to trade, sell or use foreign-produced coke and iron ore in North America, and further require that the ratio of non-USW employees to USW employees at our domestic facilities not exceed one to five.


41

Table of Contents

While other domestic integrated unionized steel producers have similar requirements in their agreements with the USW, non-union producers are not subject to such requirements.

In Europe, most represented employees at ÁñÁ«ÊÓƵK are represented by the OZ Metalurg union and are covered by an agreement that expires at the end of December 2014.

At ÁñÁ«ÊÓƵC, the collective bargaining agreement with the USW covering employees at the Lake Erie Works and Hamilton Works expires in September 2018 and October 2014, respectively.

Many international competitors operate in jurisdictions where employees have significantly fewer rights, which may give an advantage to such competitors.

We are at risk of labor stoppages.

Our collective bargaining agreements covering most of our domestic employees expire September 1, 2015.

At ÁñÁ«ÊÓƵC, the collective bargaining agreement with the USW covering employees at Lake Erie Works expires in September 2018. The collective bargaining agreement with the USW covering employees at Hamilton Works expires in October 2014.

In Europe, most represented employees at ÁñÁ«ÊÓƵK are represented by the OZ Metalurg union and are covered by an agreement that expires at the end of December 2014.

We are at risk for work stoppages thereafter or if unauthorized job actions occur.

There are risks associated with future acquisitions.

The success of any future acquisitions will depend substantially on the accuracy of our analysis concerning such businesses and our ability to complete such acquisitions on favorable terms, as well as to finance such acquisitions and to integrate the acquired operations successfully with existing operations. If we are unable to integrate new operations successfully, our financial results and business reputation could suffer. Additional risks associated with acquisitions are the diversion of management’s attention from other business concerns, the potential loss of key employees and customers of the acquired companies, the possible assumption of unknown liabilities, potential disputes with the sellers, and the inherent risks in entering markets or lines of business in which we have limited or no prior experience. International acquisitions may present unique challenges and increase the Company’s exposure to the risks associated with foreign operations and countries. Antitrust and other laws may prevent us from completing acquisitions.

There are risks associated with existing and potential accounting and tax requirements.

We do not recognize a tax benefit for pretax losses in jurisdictions where we have recorded a full valuation allowance for accounting purposes. As a result, the pretax losses associated with ÁñÁ«ÊÓƵC do not provide any tax benefit for accounting purposes. Significant changes in the mix of pretax results among the jurisdictions in which we operate could have a material impact on our effective tax rate. Similarly, our use of intercompany loans has and in the future may have significant impacts on our financial statements as a result of foreign currency accounting remeasurement effects. Potential future accounting changes could negatively affect our profitability and cash flow. Even if the impacts are non cash, they may materially impact perceptions and judgments about us by rating agencies and investors. Changes in tax law could also negatively affect our profitability and cash flow.

We may be subject to litigation, the resolution of which could negatively affect our profitability and cash flow in a particular period.

Our profitability or cash flow in a particular period could be affected by an adverse ruling in any litigation currently pending in the courts or by litigation that may be filed against us in the future. For information regarding our current significant legal proceedings, see Item 3. Legal Proceedings.

Provisions of Delaware Law and our governing documents may make a takeover of U. S. Steel more difficult.

Certain provisions of Delaware law, our certificate of incorporation and by-laws could make it more difficult or delay our acquisition by means of a tender offer, a proxy contest or otherwise and the removal of incumbent directors. Such

42

Table of Contents

a transaction may offer our stockholders the opportunity to sell their stock at a price above the prevailing market price and therefore may be appealing to some or all stockholders.

A person or group could establish a substantial position in U. S. Steel stock.

We do not have a shareholder rights plan which may make it easier for a person or group to acquire a substantial position in U. S. Steel stock. Such person or group may have interests adverse to the interests of other stockholders.

We may suffer employment losses, which could negatively affect our future performance.

Over the last few years we have intensified our recruitment, training and retention efforts so that we may continue to optimally staff our operations. If we are unable to hire sufficient qualified replacements for those employees that leave U. S. Steel, our future performance may be adversely impacted. With respect to our represented employees, we may be adversely impacted by the loss of employees who retired or obtained other employment during the time they were laid off or subject to a work stoppage.

A failure of our information technology infrastructure could adversely affect our business and operations.

We rely upon the capacity, reliability and security of our information technology infrastructure and our ability to expand and update this infrastructure in response to the changing needs of our business. For example, we continue to deploy an ERP system at our various locations to help us operate more efficiently. This is a complex project, which is expected to be implemented in several phases over the next few years. We may not be able to successfully implement the ERP program without experiencing difficulties. In addition, the expected benefits of implementing the ERP system, such as increased productivity and operating efficiencies, may not be fully realized or the costs of implementation may outweigh the realized benefits. Along with modifying the implementation schedule in early 2009 to reduce near-term costs, we modified the implementation schedule in 2012 to extend the time period for system stabilization following deployments, which extends the overall timeline for project completion. This action will delay the realization of benefits from this project and may add to final project costs. Further, if we experience a problem with the functioning of an important information technology system, the resulting disruptions could have an adverse affect on our business.

Our information technology systems could be negatively affected by cyber security threats.

Increased global information technology security requirements, vulnerabilities, threats and a rise in sophisticated and targeted computer crime pose a risk to the security of our systems, networks and the confidentiality, availability and integrity of our data. Despite our efforts to protect sensitive information and confidential and personal data, our facilities and systems and those of our third-party service providers may be vulnerable to security breaches. This could lead to disclosure, modification or destruction of proprietary and other key information, defective products, production downtimes and operational disruptions, which in turn could adversely affect our reputation, competitiveness and results of operations. We may face greater risks in this area than our competitors as we implement the ERP system because among other things, we must simultaneously protect both the ERP and legacy systems until the ERP project is complete.

We have several operations conducted by joint ventures and other equity investees that we cannot operate solely for our benefit.

Several of our joint ventures and other equity investees are strategically important to U. S. Steel. Under joint venture and other equity investee arrangements, we share ownership and management of an entity with one or more parties who may or may not have the same goals, strategies, priorities or resources as we do. In general, joint ventures and other equity investees are intended to be operated for the benefit of all of the investors, rather than for our sole benefit. The benefits from a successful joint venture or other equity arrangement are shared among the investors, so that we do not receive all the benefits from our successful joint ventures. For additional information with respect to our joint ventures and other equity investees, see Note 9 to the Consolidated Financial Statements.

We depend on third parties for transportation services, and increases in costs or the availability of transportation could adversely affect our business and operations.

Our business depends on the transportation of a large number of products, both domestically and internationally. We rely primarily on third parties for transportation of the products we manufacture or distribute as well as delivery of our raw materials.


43

Table of Contents

If any of these providers were to fail to deliver raw materials to us in a timely manner, we may be unable to manufacture and deliver our products in response to customer demand. In addition, if any of these third parties were to cease operations or cease doing business with us, we may be unable to replace them at a reasonable cost.

In addition, such failure of a third-party transportation provider could harm our reputation, negatively affect our customer relationships and have a material adverse effect on our financial position and results of operations.

A significant portion of the goods we manufacture and raw materials we use in our production processes are transported by railroad, trucks, barges and ships, which are highly regulated. Changes in these regulations could increase our costs or reduce the availability of such transportation. In addition, an increase in transportation rates or fuel surcharges could materially adversely affect our sales and profitability.

Carnegie Way benefits may be limited and subject to change.

Our corporation recently initiated a shareholder value creation strategy: earn the right to grow, and drive and sustain profitable growth. Through a disciplined approach we now refer to as “The Carnegie Way,” we are working to strengthen our balance sheet, with more intense focus on cash flow, and have launched a series of initiatives that we believe will enable us to add value, get leaner faster, right-size, and improve our performance across our core business process capabilities, including commercial, supply chain, manufacturing, procurement, innovation, and operational and functional support. Business conditions, our ability to implement such initiatives, and factors beyond our control may limit the benefits associated with certain identified projects and limit the Carnegie Way's economic benefits.

Item 1B. UNRESOLVED STAFF COMMENTS

None.

44

Table of Contents


Item 2. PROPERTIES

The following tables list U. S. Steel’s main properties, their locations and their products and services:
North American Operations
 
 
 
 
 
 
 
Property
 
Location
 
Products and Services
Gary Works
 
Gary, Indiana
 
Slabs; Sheets; Tin mill; Strip mill plate; Coke
Midwest Plant
 
Portage, Indiana
 
Sheets; Tin mill
East Chicago Tin
 
East Chicago, Indiana
 
Sheets; Tin mill
Great Lakes Works
 
Ecorse and River Rouge, Michigan
 
Slabs; Sheets
Mon Valley Works
 
 
 
 
Irvin Plant
 
West Mifflin, Pennsylvania
 
Sheets
Edgar Thomson Plant
 
Braddock, Pennsylvania
 
Slabs
Fairless Plant
 
Fairless Hills, Pennsylvania
 
Galvanized sheets
Clairton Plant
 
Clairton, Pennsylvania
 
Coke
Granite City Works
 
Granite City, Illinois
 
Slabs; Sheets; Coke
Lake Erie Works
 
Nanticoke, Ontario, Canada
 
Slabs; Sheets; Coke
Hamilton Works
 
Hamilton, Ontario, Canada
 
Sheets; Coke
Fairfield Works
 
Fairfield, Alabama
 
Slabs; Rounds; Sheets; Seamless Tubular
ÁñÁ«ÊÓƵ-POSCO Industries(a)
 
Pittsburg, California
 
Sheets; Tin mill
PRO-TEC Coating Company(a)
 
Leipsic, Ohio
 
Galvanized and high strength annealed sheets
Double Eagle Steel Coating Company(a)
 
Dearborn, Michigan
 
Galvanized sheets
Double G Coatings Company, L.P.(a)
 
Jackson, Mississippi
 
Galvanized and Galvalume® sheets
Worthington Specialty Processing(a)
 
Jackson, Canton and Taylor, Michigan
 
Steel processing
Feralloy Processing Company(a)
 
Portage, Indiana
 
Steel processing
Chrome Deposit Corporation(a)
 
Various
 
Roll processing
Acero Prime, S.R.L. de C.V.(a) 
 
San Luis Potosi, Ramos Arizpe, and Toluca, Mexico
 
Steel processing; warehousing; logistical services
Baycoat Limited Partnership(a)
 
Hamilton, Ontario, Canada
 
Steel processing
D.C. Chrome Limited(a)
 
Stony Creek, Ontario, Canada
 
Roll processing
Lorain Tubular Operations
 
Lorain, Ohio
 
Seamless Tubular
Lone Star Tubular
 
Lone Star, Texas
 
Welded Tubular
Bellville Tubular Operations
 
Bellville, Texas
 
Welded Tubular
McKeesport Tubular Operations
 
McKeesport, Pennsylvania
 
Welded Tubular
Wheeling Machine Products
 
Pine Bluff, Arkansas and Hughes Springs, Texas
 
Tubular couplings
Tubular Processing
 
Houston, Texas
 
Tubular processing
Offshore Operations
 
Houston, Texas
 
Tubular threading, inspection, accessories and storage services
Patriot Premium Threading Services(a)
 
Midland, Texas
 
Tubular threading, accessories and premium connections
United Spiral Pipe, LLC(a)
 
Pittsburg, California
 
Spiral Welded Tubular
Minntac Iron Ore Operations
 
Mt. Iron, Minnesota
 
Iron ore pellets
Keetac Iron Ore Operations
 
Keewatin, Minnesota
 
Iron ore pellets
(a)
Equity investee

45

Table of Contents

North American Operations (Continued)
 
 
 
 
 
Property
 
Location
 
Products and Services
Hibbing Taconite Company(a)
 
Hibbing, Minnesota
 
Iron ore pellets
Tilden Mining Company(a)
 
Ishpeming, Michigan
 
Iron ore pellets
Transtar
 
Alabama, Indiana, Michigan, Ohio, Pennsylvania, Texas
 
Railroad operations
(a) Equity Investee
 
Other Operations
 
 
 
Property
 
Location
 
Products and Services
U. S. Steel Košice
 
Košice, Slovakia
 
Slabs; Sheets; Tin mill; Strip mill plate; Tubular; Coke; Radiators; Refractories
Apolo Tubulars S.A.(a)
 
Lorena, Sao Paulo, Brazil
 
Welded Tubular
(a)
Equity Investee

U. S. Steel and its predecessors (including Lone Star) have owned their properties for many years with no material adverse claims asserted. In the case of Great Lakes Works, Granite City Works, the Midwest Plant and Keetac iron ore operations, U. S. Steel or its subsidiaries are the beneficiaries of bankruptcy laws and orders providing that properties are held free and clear of past liabilities. In addition, U. S. Steel or its predecessors (including Stelco) obtained title insurance, local counsel opinions or similar protections when the major properties were initially acquired or since acquisition.

The slab caster facility at Fairfield, Alabama is subject to a lease. During the fourth quarter of 2012, U. S. Steel exercised an option to renew the lease for a nine year term and purchase the facility at the expiration of the renewal period in June 2022. For further information, see Note 14 to the Consolidated Financial Statements.

At the Midwest Plant in Indiana, U. S. Steel has a supply agreement for various utility services with a company that owns a cogeneration facility located on U. S. Steel property. The Midwest Plant agreement expires in 2028.

The headquarters office space in Pittsburgh, Pennsylvania used by U. S. Steel is leased through September 2017.

For property, plant and equipment additions, including capital leases, see “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Financial Condition, Cash Flows and Liquidity – Cash Flows” and Note 10 to the Consolidated Financial Statements.

Item 3. LEGAL PROCEEDINGS

U. S. Steel is the subject of, or a party to, a number of pending or threatened legal actions, contingencies and commitments involving a variety of matters, including laws and regulations relating to the environment. Certain of these matters are included below in this discussion. The ultimate resolution of these contingencies could, individually or in the aggregate, be material to the financial statements. However, management believes that U. S. Steel will remain a viable and competitive enterprise even though it is possible that these contingencies could be resolved unfavorably.

General Litigation

In a series of lawsuits filed in federal court in the Northern District of Illinois beginning September 12, 2008, individual direct or indirect buyers of steel products have asserted that eight steel manufacturers, including U. S. Steel, conspired in violation of antitrust laws to restrict the domestic production of raw steel and thereby to fix, raise, maintain or stabilize the price of steel products in the United States. The cases are filed as class actions and claim damages related to steel product purchases during the time period of April 1, 2005 to December 31, 2007. A hearing on class certification is expected during the first quarter of 2014. U. S. Steel is vigorously defending these lawsuits and does not believe that it is probable a liability regarding these matters has been incurred. We are unable to estimate a range of possible loss at this time.





46

Table of Contents

Asbestos Litigation

At December 31, 2013, U. S. Steel was a defendant in approximately 720 active cases involving approximately 3,320 plaintiffs. As of December 31, 2012, U. S. Steel was a defendant in approximately 790 active cases involving approximately 3,330 plaintiffs. During 2013, settlements and dismissals resulted in the disposition of approximately 250 claims and U. S. Steel paid approximately $11 million in settlements. New filings added approximately 240 claims.

About 2,560, or approximately 77 percent, of these claims are currently pending in jurisdictions which permit filings with massive numbers of plaintiffs. Based upon U. S. Steel’s experience in such cases, it believes that the actual number of plaintiffs who ultimately assert claims against U. S. Steel will likely be a small fraction of the total number of plaintiffs. Most of the claims filed in 2013, 2012 and 2011 involve individual or small groups of claimants.
Historically, these claims against U. S. Steel fall into three major groups: (1) claims made by persons who allegedly were exposed to asbestos at U. S. Steel facilities (referred to as “premises claims”); (2) claims made by industrial workers allegedly exposed to products formerly manufactured by U. S. Steel; and (3) claims made under certain federal and general maritime laws by employees of former operations of U. S. Steel. The ultimate outcome of any claim depends upon a myriad of legal and factual issues, including whether the plaintiff can prove actual disease, if any; actual exposure, if any, to U. S. Steel products; the duration of exposure to asbestos, if any, on U. S. Steel’s premises and the plaintiff’s exposure to other sources of asbestos. In general, the only insurance available to U. S. Steel with respect to asbestos claims is excess casualty insurance, which has multi-million dollar self-insured retentions. To date, U. S. Steel has received minimal payments under these policies relating to asbestos claims.
These asbestos cases allege a variety of respiratory and other diseases based on alleged exposure to asbestos. U. S. Steel is currently a defendant in cases in which a total of approximately 270 plaintiffs allege that they are suffering from mesothelioma. The potential for damages against defendants may be greater in cases where the plaintiffs can prove mesothelioma.
In many cases in which claims have been asserted against U. S. Steel, the plaintiffs have been unable to establish any causal relationship to U. S. Steel or our products or premises; however, with the decline in mass plaintiff cases, the incidence of claimants actually alleging a claim against U. S. Steel is increasing. In addition, in many asbestos cases, the plaintiffs have been unable to demonstrate they have suffered any identifiable injury or compensable loss at all; that any injuries they have incurred did in fact result from alleged exposure to asbestos; or that such alleged exposure was in any way related to U. S. Steel or our products or premises.
In every asbestos case in which U. S. Steel is named as a party, the complaints are filed against numerous named defendants and generally do not contain allegations regarding specific monetary damages sought. To the extent that any specific amount of damages is sought, the amount applies to claims against all named defendants and in no case is there any allegation of monetary damages against U. S. Steel. Historically, approximately 89 percent of the cases against U. S. Steel did not specify any damage amount or stated that the damages sought exceeded the amount required to establish jurisdiction of the court in which the case was filed. (Jurisdictional amounts generally range from $25,000 to $75,000). U. S. Steel does not consider the amount of damages alleged, if any, in a complaint to be relevant in assessing our potential exposure to asbestos liabilities.
U. S. Steel aggressively pursues grounds for the dismissal of U. S. Steel from pending cases and litigates cases to verdict where we believe litigation is appropriate. U. S. Steel also makes efforts to settle appropriate cases, especially mesothelioma cases, for reasonable, and frequently nominal, amounts.

The following table shows activity with respect to asbestos litigation:
Year ended
December 31,
 
Opening
Number of
Claims
 
Claims
Dismissed,
Settled and
Resolved
 
New Claims
 
Closing Number
of Claims
 
Amounts Paid to
Resolve Claims
(in millions)
2011
 
3,090
 
130
 
275
 
3,235
 
$8
2012
 
3,235
 
190
 
285
 
3,330
 
$15
2013
 
3,330
 
250
 
240
 
3,320
 
$11
The amount U. S. Steel has accrued for pending asbestos claims is not material to U. S. Steel’s financial position. U. S. Steel does not accrue for unasserted asbestos claims because it is not possible to determine whether any loss is probable with respect to such claims or even to estimate the amount or range of any possible losses. The vast majority of pending claims against us allege so-called “premises” liability-based exposure on U. S. Steel’s current or

47

Table of Contents

former premises. These claims may be made by an indeterminable number of people such as truck drivers, railroad workers, salespersons, contractors and their employees, government inspectors, customers, visitors and even trespassers. In most cases, the claimant was exposed to asbestos in non-U. S. Steel settings; the relative periods of exposure between U. S. Steel and non-U. S. Steel settings vary with each claimant, and the strength or weakness of the causal link between U. S. Steel exposure and any injury vary widely as do the nature and severity of the injury claimed.
We are unable to estimate the ultimate outcome of asbestos-related lawsuits, claims and proceedings due to the unpredictable nature of personal injury litigation. Despite this uncertainty, management believes that the ultimate resolution of these matters will not have a material adverse effect on the Company’s financial condition, although the resolution of such matters could significantly impact results of operations for a particular period. Among the factors considered in reaching this conclusion are: (1) it has been many years since U. S. Steel employed maritime workers or manufactured or sold asbestos containing products; (2) most asbestos containing material was removed or remediated at U. S. Steel facilities many years ago and (3) U. S. Steel’s history of trial outcomes, settlements and dismissals.
The foregoing statements of belief are forward-looking statements. Predictions as to the outcome of pending litigation are subject to substantial uncertainties with respect to (among other things) factual and judicial determinations, and actual results could differ materially from those expressed in these forward-looking statements.

Environmental Proceedings

The following is a summary of the proceedings of U. S. Steel that were pending or contemplated as of December 31, 2013, under federal and state environmental laws. Except as described herein, it is not possible to accurately predict the ultimate outcome of these matters.

CERCLA Remediation Sites

Claims under CERCLA and related state acts have been raised with respect to the cleanup of various waste disposal and other sites. CERCLA is intended to expedite the cleanup of hazardous substances without regard to fault. Potentially responsible parties (PRPs) for each site include present and former owners and operators of, transporters to and generators of the substances at the site. Liability is strict and can be joint and several. Because of various factors including the ambiguity of the regulations, the difficulty of identifying the responsible parties for any particular site, the complexity of determining the relative liability among them, the uncertainty as to the most desirable remediation techniques and the amount of damages and cleanup costs and the time period during which such costs may be incurred, it is impossible to reasonably estimate U. S. Steel’s ultimate cost of compliance with CERCLA.

Projections, provided in the following paragraphs, of spending for and/or timing of completion of specific projects are forward-looking statements. These forward-looking statements are based on certain assumptions including, but not limited to, the factors provided in the preceding paragraph. To the extent these assumptions prove to be inaccurate, future spending for, or timing of completion of environmental projects may differ materially from what was stated in forward-looking statements.

At December 31, 2013, U. S. Steel had been identified as a PRP at a total of 21 CERCLA sites where liability is not resolved. Based on currently available information, which is in many cases preliminary and incomplete, management believes that U. S. Steel’s liability for CERCLA cleanup and remediation costs will be less than $100,000 for 9 sites, between $100,000 and $1 million for 8 sites, between $1 million and $5 million for 3 sites and over $5 million for 1 site. The one site over $5 million is the former Duluth Works, which was listed by the Minnesota Pollution Control Agency (MPCA) under the Minnesota Environmental Response and Liability Act on its Permanent List of Priorities. The EPA has included the Duluth Works site with the St. Louis River Interlake Duluth Tar site on its National Priorities List. The Duluth Works cleanup has proceeded since 1989. U. S. Steel is finalizing two Feasibility Studies that include remedial measures to address contaminated sediments in the St. Louis River Estuary and several Upland Operable Units that could impact the Estuary if not addressed. Additionally, a Remedial Action Plan is being finalized to address the impacted areas on approximately 132 acres of upland property where a potential redevelopment opportunity has been identified. Additional study, investigation and oversight costs along with implementation of U. S. Steel's preferred remedial alternatives on the upland property and Estuary are currently estimated at $52 million.

In addition, there are 11 sites related to U. S. Steel where information requests have been received or there are other indications that U. S. Steel may be a PRP under CERCLA, but where sufficient information is not presently available to confirm the existence of liability or to make any judgment as to the amount thereof.


48

Table of Contents

Other Remediation Activities

There are 35 additional sites where remediation is being sought under other environmental statutes, both federal and state, or where private parties are seeking remediation through discussions or litigation. Based on currently available information, which is in many cases preliminary and incomplete, management believes that liability for cleanup and remediation costs in connection with 9 of these sites will be under $100,000 per site, another 19 sites have potential costs between $100,000 and $1 million per site, and 2 sites may involve remediation costs between $1 million and $5 million per site. As described below, costs for remediation, investigation, restoration or compensation are estimated to be in excess of $5 million per site at 2 sites. Potential costs associated with remediation at the remaining 3 sites are not presently determinable.

Gary Works

On March 4, 2010 the EPA notified U. S. Steel the requirements of the January 26, 1998 CWA consent decree in United States of America v. USX (Northern District of Indiana) had been satisfied. A joint motion to terminate the CWA consent decree was granted by the court on June 25, 2012, thereby terminating the consent decree in its entirety. As of December 31, 2013, project costs have amounted to $61 million. In 1998, U. S. Steel also entered into an additional consent decree with the public trustees, which resolves liability for natural resource damages on the same section of the Grand Calumet River. U. S. Steel was obligated to perform, and has completed the ecological restoration in this section of the Grand Calumet River. U. S. Steel has also released the $1 million payment to the public trustee for ecological monitoring and received letters from the three trustees confirming completion of U. S. Steel's obligations. Although the financial requirements for the Natural Resource Damages Order have concluded, the order will remain open due to legal issues. In total, the accrued liability for the above projects based on the estimated remaining costs was approximately $587,000 at December 31, 2013.

At Gary Works, U. S. Steel has agreed to close three hazardous waste disposal sites: D5, along with an adjacent solid waste disposal unit, Terminal Treatment Plant (TTP) Area; T2; and D2 combined with a portion of the Refuse Area, where a solid waste disposal unit overlaps with the hazardous waste disposal unit. The sites are located on plant property. The Indiana Department of Environmental Management (IDEM) has approved the closure plans for all three sites. U. S. Steel continues technical discussions with IDEM on the conditions of the D2 approval. Closure is complete at D5, TTP and T2, with IDEM approval of the closure certification reports on February 1, 2012 (D5), April 3, 2012 (TTP) and November 1, 2012 (T2). As of December 31, 2013, the accrued liability for estimated costs to close these sites is approximately $16 million.

On October 23, 1998, EPA issued a final Administrative Order on Consent (Order) addressing Corrective Action for Solid Waste Management Units (SWMU) throughout Gary Works. This Order requires U. S. Steel to perform a RCRA Facility Investigation (RFI), a Corrective Measure Study (CMS) and Corrective Measure Implementation at Gary Works. Reports of field investigation findings for Phase I work plans have been submitted to the EPA. Through December 31, 2013, U. S. Steel had spent $51.4 million for corrective action studies, Vessel Slip Turning Basin interim measures and other corrective actions.

U. S. Steel has completed two proposed facility-wide Perimeter Groundwater Monitoring Program (Program) events for 2013 and is preparing a 2013 Annual Report which will include recommendations for continuing or modifying the monitoring Program in 2014. U. S. Steel also continues to conduct additional focused groundwater assessment work previously identified by the Program and approved by the EPA. U. S. Steel has also completed fieldwork associated with a Baseline Ecological Risk Assessment work plan for addressing sediments in the East Breakwall Area and is preparing a summary report of the investigative work in the East Breakwater Area for submittal to the EPA. In addition, U. S. Steel has received approval from the EPA and has initiated activities associated with an Interim Stabilization Measure to address certain components of the East Side Groundwater Solid Waste Management Area as required by the Order. Until the remaining Phase I work and Phase II field investigations are completed, it is not possible to assess what additional expenditures will be necessary for Corrective Action projects at Gary Works. In total, the accrued liability for projects is approximately $37 million as of December 31, 2013, based on the estimated remaining costs.

U. S. Steel started up the innovative technology of the Carbon Alloy Synthesis Product (CASP) C Module in November 2012. U. S. Steel has conducted limited compliance testing, consistent with the requirements of the permit for CASP, and as otherwise required by IDEM. Based upon this data, U. S. Steel has advised the IDEM U. S. Steel cannot certify that it is continuously meeting the applicable emission limits for CASP C Module. U. S. Steel is currently working with IDEM for resolution.



49

Table of Contents

Mon Valley Works

On October 23, 2013, the Allegheny County Health Department (ACHD) issued a notice of violation (NOV) to U. S. Steel regarding emissions from its C Battery quench tower. In the NOV, ACHD alleges that based upon stack testing data, the sulfur compound emissions from the quench tower exceeded those authorized by the corresponding installation permit. In addition, U. S. Steel notified ACHD that it cannot continuously meet the sulfur compound emission limits from the pushing operations at C Battery; and that it cannot certify continuous compliance with permit requirements associated with charging emissions from C Battery. U. S. Steel continues to meet with ACHD to discuss resolution. Any impacts to U. S. Steel are not estimable at this time.

Midwest Plant

A former disposal area located on the east side of the Midwest Plant was designated a SWMU (East Side SWMU) by IDEM before U. S. Steel acquired this plant from National Steel Corporation. U. S. Steel submitted a Closure Plan to IDEM recommending consolidation and “in-place” closure of the East Side SWMU. IDEM approved the Closure Plan in January 2010. Implementation of the Closure Plan began during the third quarter of 2010 and fieldwork was completed early in the second quarter of 2011. A full vegetative cover over the project area is in place and the Closure Completion Report was approved by IDEM on November 21, 2011. As of December 31, 2013, $4.4 million has been spent on the project. The remaining cost is estimated to be $71,000 for post construction monitoring work and was recorded as an accrued liability as of December 31, 2013.

Fairless Plant

In January 1992, U. S. Steel commenced negotiations with the EPA regarding the terms of an Administrative Order on consent, pursuant to RCRA, under which U. S. Steel would perform an RFI and a CMS at our Fairless Plant. A Phase I RFI report was submitted during the third quarter of 1997. The cost to U. S. Steel to continue to maintain the interim measures, develop a Phase II/III RFI Work Plan and implement certain corrective measures is estimated to be $598,000. It is reasonably possible that additional costs of as much as $25 million to $40 million may be incurred at this site in combination with four other projects. See Note 24 to the Consolidated Financial Statements “Contingencies and Commitments – Environmental Matters – Remediation Projects – Projects with Ongoing Study and Scope Development.”
 
Fairfield Works
 
A consent decree was signed by U. S. Steel, the EPA and the U.S. Department of Justice and filed with the United States District Court for the Northern District of Alabama (United States of America v. USX Corporation) on December 11, 1997. In accordance with the consent decree, U. S. Steel initiated a RCRA corrective action program at the Fairfield Works facility. The Alabama Department of Environmental Management (ADEM) with the approval of the EPA assumed primary responsibility for regulation and oversight of the RCRA corrective action program at Fairfield Works. The Phase I RFI for waste disposed of at the Exum Materials Management Area was voluntarily implemented in October 2011 and completed in December 2011 with a final completion report submitted to ADEM in June 2012. A Phase II RFI for the Fairfield Facility property was completed in December 2012 and the completion report was submitted to ADEM in the third quarter of 2013. In total, the accrued liability for remaining work under the Corrective Action Program including the former Ensley facility was $271,000 at December 31, 2013, based on estimated remaining costs. It is reasonably possible that additional costs of as much as $25 million to $40 million may be incurred at this site in combination with four other projects. See Note 24 to the Consolidated Financial Statements “Contingencies and Commitments – Environmental Matters – Remediation Projects – Projects with Ongoing Study and Scope Development.”

Lorain Tubular Operations

In September 2006, U. S. Steel received a letter from the Ohio Environmental Protection Agency (OEPA) inviting U. S. Steel to enter into discussions about RCRA Corrective Action at Lorain Tubular Operations. A Phase I RFI on the identified SWMUs and Area of Contamination was submitted in March 2012 and a revised Phase II workplan that addresses additional soil investigations, site wide groundwater and the pipe mill lagoon was submitted in July 2013 and is awaiting final approval by the OEPA. As of December 31, 2013, U. S. Steel has spent $831,000 on studies at this site. Costs to complete additional projects are estimated to be $409,000. It is reasonably possible that additional costs of as much as $25 million to $40 million may be incurred at this site in combination with four other projects. See Note 24 to the Consolidated Financial Statements “Contingencies and Commitments – Environmental Matters – Remediation Projects – Projects with Ongoing Study and Scope Development.”


50

Table of Contents

Construction and start-up of a seep collection system at the D2 landfill was completed in late 2011. The system was required by OEPA as part of a revised Post-Closure Care Plan for the landfill. Based on subsequent system influent and effluent water quality data, additional seep water treatment will be necessary to meet future permit limits. A permit to install was submitted to, and approved by the OEPA during the fourth quarter of 2012. The equipment was intalled and the system began start-up tuning in December 2013. As of December 31, 2013, project costs have amounted to $1.9 million. The remaining cost of the project is expected to be $39,000 and was recorded as an accrued liability as of December 31, 2013.

Great Lakes Works

On February 13, 2007, Michigan Department of Environmental Quality (MDEQ) and U. S. Steel agreed to an Administrative Consent Order (Order) that resolves alleged violations of CWA National Pollutant Discharge Elimination System permits at the Great Lakes Works facility. As required by the Order, U. S. Steel has paid a civil penalty of $300,000 and has reimbursed MDEQ $50,000 in costs. The Order identified certain compliance actions to address the alleged violations. U. S. Steel has completed work on most of these compliance actions, and has initiated work on the others. As of December 31, 2013, $1.8 million has been spent on the project. In addition, $161,000 remains accrued for possible additional requirements.

On April 20, 2011, U. S. Steel Great Lakes Works received an NOV from MDEQ regarding an alleged Basic Oxygen Process (BOP) roof monitor opacity violation that was to have occurred on April 14, 2011. On May 11, 2011, U. S. Steel responded to the NOV stating that the alleged exceedance was caused by a desulfurization lance failure and that it has implemented corrective actions to prevent its recurrence.

On May 10, 2011, the MDEQ issued a violation notice alleging that fallout from a bleeder incident on April 20, 2011 caused an unreasonable interference with the comfortable enjoyment of life and property in Windsor, Canada. U. S. Steel responded to the notice to MDEQ.
On October 10, 2012, the MDEQ issued a violation notice alleging the No. 2 baghouse at the No. 2 BOP exceeded applicable emission limits based upon stack testing conducted earlier in 2012. On October 31, 2012, U. S. Steel responded to the notice indicating that corrective actions at the baghouse have been employed and stack tests conducted after the repairs were made to demonstrate the stack complies with emission limits. Discussions between U. S. Steel and MDEQ are on going pending a resolution of the matter. During negotiations for resolution, MDEQ has made a penalty demand of $123,000 regarding the failed stack tests at the No. 2 baghouse at the No. 2 BOP.

On April 26, 2013, the MDEQ issued a violation notice alleging the Selective Catalytic Reduction system on the Continuous Galvanizing Line was not operating properly on March 27, 2013. U. S. Steel responded to the violation notice on May 24, 2013. Discussions between U. S. Steel and MDEQ are ongoing pending a resolution of the matter.

Granite City Works
U. S. Steel received two NOVs, dated February 20, 2004 and March 25, 2004, for air violations at the coke batteries, the blast furnace and the steel shop at our Granite City Works facility. All of the issues have been resolved except for an issue relating to air emissions that occurs when coke is pushed out of the ovens, for which a compliance plan has been submitted to the Illinois Environmental Protection Agency (IEPA). On December 18, 2007, U. S. Steel and IEPA entered into a consent order (Order) (State of Illinois ex. rel. Lisa Madigan vs. ÁñÁ«ÊÓƵ), which resolved the issues raised in the two NOVs. The Order required that U. S. Steel: (1) pay a penalty of $300,000, which U. S. Steel paid on January 10, 2008; (2) demonstrate compliance with Coke Oven Pushing Operations in accordance with the compliance schedule provided in the Order; (3) comply with the basic oxygen furnace (BOF) opacity emissions in accordance with the schedule provided in the Order; and (4) submit to the IEPA a revised permit application with the correct sulfur dioxide emission factors. In February 2011, U. S. Steel demonstrated compliance with the applicable requirements and in March 2011, U. S. Steel certified compliance with the applicable regulations. U. S. Steel continues to negotiate permit modifications to address the blast furnace gas sulfur dioxide emission factor as required by the Order.
On July 1, 2010, U. S. Steel entered into a Memorandum of Understanding (MOU) with the IEPA that requires Granite City Works to achieve reductions in emissions of particulate matter. U. S. Steel will evaluate and install appropriate controls to achieve this purpose. To complete the obligations pursuant to the MOU, U. S. Steel anticipates incurring expenditures of approximately $55 million to install additional pollution controls at the BOF. In July 2013, U. S. Steel commenced construction on the new baghouse.

51

Table of Contents

To comply with the Illinois State NOx RACT rule, U. S. Steel will install Flue Gas Recirculation and Continuous Emission Monitors on Boilers 11 and 12 at Granite City Works with expenditures of approximately $4 million. U. S. Steel evaluated and will install a NOx continuous emissions monitor for the slab reheat furnaces with expenditures of approximately $1 million.
On November 30, 2012, the IEPA issued a Violation Notice alleging violations of emission standards from the facility’s BOF. In the notice, the IEPA also alleged the facility failed to comply with associated CAA regulations and the facility did not use steam rings at the BOP as required by the facility’s Title V permit. U. S. Steel met with the IEPA on February 6, 2013 and provided a written response to the IEPA on February 27, 2013. U. S. Steel and IEPA continue to discuss resolution of the matter.

Minnesota Ore Operations
On February 6, 2013, the EPA published a Federal Implementation Plan (FIP) that applies to taconite facilities in Minnesota. The FIP establishes and requires the use of low Nitrogen Oxide (NOx) burners on indurating furnaces as Best Available Retrofit Technology. While U. S. Steel has already installed low NOx burners on two furnaces at Minntac and is currently obligated to install low NOx burners on the three other furnaces at Minntac pursuant to existing agreements and permits, the rule would require the installation of low NOx burners on the one furnace at Keetac for which U. S. Steel did not have an otherwise existing obligation. U. S. Steel estimates the expenditures associated with the installation of low NOx burners of as much as $35 million to $45 million. On June 14, 2013, the Eighth Circuit Court of Appeals stayed the effectiveness of the FIP. EPA also published a final rule denying the approval of the Minnesota SIP, which did not require the installation of low NOx burners and determined the applicable Best Available Retrofit Technology on a case-by-case basis. U. S. Steel and other taconite facilities have petitioned EPA for reconsideration of the final rule denying the SIP; and have also petitioned the Eighth Circuit for judicial review of the final rule.
On March 2, 2012, U. S. Steel’s Keetac facility received an NOV from the Minnesota Pollution Control Agency (MPCA) for alleged violations of the Minnesota Fugitive Dust Rule. U. S. Steel responded to the notice on March 30, 2012 in which it respectfully contested the allegations provided in the notice. To date, no response from the MPCA has been received nor has any penalty been assessed.
U. S. Steel and the MPCA reached agreement on a Schedule of Compliance (SOC) to reduce air emissions at the Minntac and Keetac facilities and to address alleged water quality issues at the Minntac facility. The SOC incorporates the Keetac Expansion Mercury Agreement associated with the MPCA’s Mercury Total Maximum Daily Load requirements and Minntac’s Title V NOx reduction requirements. A dry control system will be installed at the Minntac facility to reduce PM, PM10, PM2.5, SO2, and mercury emissions. Parts of the SOC became effective on June 9, 2011, while other parts became effective on October 19, 2011. U. S. Steel expects expenditures of approximately $220 million to install dry waste gas controls at Minntac.
On January 20, 2013, U. S. Steel’s Keetac facility received an Alleged Violations Letter (AVL) from MPCA alleging a violation of Minnesota rules during a wind and fugitive dust event on the Keetac Taconite tailings basin in December 2012. In February 2013, U. S. Steel responded to the AVL indicating that no violation occurred, and also explained the actions taken by Keetac during the December wind event to minimize emissions. To date, no response from the MPCA has been received nor has any penalty been assessed.

Geneva Works

At U. S. Steel’s former Geneva Works, liability for environmental remediation, including the closure of three hazardous waste impoundments and facility-wide corrective action, has been allocated between U. S. Steel and the current property owner pursuant to an agreement and a permit issued by the Utah Department of Environmental Quality. As of December 31, 2013, U. S. Steel has spent $18.1 million to complete remediation on certain areas of the site. Having completed the investigation on a majority of the remaining areas identified in the permit, U. S. Steel has determined that the most effective means to address the remaining impacted material is to manage those materials in a previously approved on-site Corrective Action Management Unit. U. S. Steel has an accrued liability of $64 million as of December 31, 2013 for our estimated share of the remaining costs of remediation.








52

Table of Contents

Duluth Works

The former U. S. Steel Duluth Works site was placed on the National Priorities List under CERCLA in 1983 and on the State of Minnesota’s Superfund list in 1984. Liability for environmental remediation at the site is governed by a Response Order by Consent executed with the MPCA in 1985 and a Record of Decision signed by MPCA in 1989. As of December 31, 2013, U. S. Steel has spent $22.4 million to complete remediation on certain areas of the site. Current activity at the site is focused on completing the feasibility study and remedial design of the two St. Louis River Estuary Operable Units (OUs) along with completing a feasibility study on several Upland OUs, as defined by the MPCA in the 2008 5-year review of this site. The expanded scope of this project was defined in the fourth quarter of 2013 and a $32 million charge was recorded to account for the additional costs associated with implementing U. S. Steel's preferred remedy. As of December 31, 2013, the accrued liability for this project totaled $52 million.

Municipal Industrial Disposal Company (MIDC)

MIDC was a licensed disposal facility where U. S. Steel disposed coal tar and other wastes. The site was mismanaged by the operator and subsequently on August 30, 2002, U. S. Steel entered into a COA with the Pennsylvania Department of Environmental Protection to address the environmental issues at the site. While U. S. Steel was not the only entity to use the facility, U. S. Steel is the single remaining viable company responsible for the cleanup. An engineered remedy for the three locations at the site requiring remediation was implemented in July 2011 and completed in December 2011. The final completion report was submitted to the agency in December 2012. As of December 31, 2013, U. S. Steel has spent $11.9 million related to the project. The remaining cost of the project is estimated to be $172,000 and was recorded as an accrued liability as of December 31, 2013.

ÁñÁ«ÊÓƵ-POSCO Industries (UPI)

At UPI, a joint venture between subsidiaries of U. S. Steel and POSCO, corrective measures have been implemented for the majority of the former SWMUs. Prior to the formation of UPI, U. S. Steel owned and operated the Pittsburg, California facility and retained responsibility for the existing environmental conditions. Seven SWMUs remain at the facility. Based on their constituents, six of these SWMUs have been combined into two groups of three, while one SWMU remains a single entity. Investigation of the single SWMU is complete and an engineered remedy was defined in the fourth quarter of 2013 and a $7 million charge was recorded to account for the costs associated with implementing U. S. Steel's preferred remedy. Investigation for the second SWMU group is also complete with recommendations, limited to future monitoring only, currently being discussed with the California Department of Toxic Substances Control (DTSC). Investigations continue for the remaining SWMU group and it is likely that corrective measures will be required, but it is not possible at this time to define a scope or estimate costs for what may be required by the DTSC. As of December 31, 2013, approximately $8 million remains for ongoing environmental studies, investigations and remedy implementation. It is reasonably possible that additional costs of as much as $25 million to $40 million may be incurred at this site in combination with four other projects at various locations. See Note 24 to the Consolidated Financial Statements “Contingencies and Commitments – Environmental Matters – Remediation Projects – Projects with Ongoing Study and Scope Development.”

EPA Region V Federal Lawsuit
On August 1, 2012, the U.S. government, joined by the States of Illinois, Indiana and Michigan, filed a complaint (the Complaint) in the Northern District of Indiana alleging various CAA and State air regulatory violations that were to have allegedly occurred at Gary Works, Granite City Works, and Great Lakes Works, our three integrated iron and steel facilities located in the EPA’s Region V. The Complaint alleges that Gary Works failed to obtain the proper pre-construction permit for a routine reline of its Blast Furnace No. 4 in 1990, and that the three facilities failed to meet certain operational, maintenance, opacity, and recordkeeping requirements under the CAA and its implementing regulations. The Complaint requests relief in the form of statutory penalties for each violation and for injunctive relief. U. S. Steel believes that the claims asserted in the Complaint are not justified and are without statutory foundation. On September 21, 2012, U. S. Steel filed a Motion to Dismiss the U.S. government’s claims for relief regarding the 1990 reline of the Gary Blast Furnace No. 4 and filed an answer to the remaining allegations in the Complaint. On August 21, 2013, the district court issued an Opinion and Order, granting in part, and denying in part, the Motion to Dismiss. The court granted the Motion to Dismiss with respect to penalties such that the government is barred from seeking any civil penalties. However, the court denied our Motion to Dismiss with respect to injunctive relief. On September 6, 2013, U. S. Steel filed a Motion for Reconsideration to the district court with respect to its denial of the Motion to Dismiss regarding injunctive relief. On November 5, 2013, the Court heard oral arguments regarding U. S. Steel’s Motion for Reconsideration and to date, no ruling has been issued. In the interim, the parties are continuing with discovery. Fact discovery is being completed in three phases, consisting of one phase for each facility. The first

53

Table of Contents

phase of fact discovery, regarding Granite City Works, was completed on December 20, 2013. U. S. Steel will continue to vigorously defend against these claims. At this time, the potential outcome is not reasonably estimable.

Other

In April 2003, U. S. Steel and Salomon Smith Barney Holdings, Inc. (SSB) entered into a consent order with the Kansas Department of Health & Environment (KDHE) concerning a former zinc smelting operation in Cherryvale, Kansas. Remediation was essentially completed in 2007 and U. S. Steel and SSB continue to work with KDHE to address the remaining issues. As such, the Consent Order was amended on May 3, 2013, to investigate potential contamination beyond the boundary of the former zinc smelting operation. At December 31, 2013, an accrual of $165,000 remains available for these outstanding issues.

On January 18, 2011, KDHE signed a Consent Agreement and Final Order (CAFO), which obligates U. S. Steel to prepare and implement a corrective action plan for two sites in Girard, Kansas. The sites are referred to as the Girard Zinc Works and the Cherokee Lanyon #2 site. The CAFO recognizes a single project incorporating the corrective action for both sites. An addendum to the May 2012 Final Corrective Action Completion Report summarizing completion of fieldwork was submitted to KDHE on March 18, 2013 and subsequently approved by KDHE on March 22, 2013. U. S. Steel is currently working with KDHE on developing a long term care agreement to address post closure items for the site. As of December 31, 2013, U. S. Steel has an accrued liability of approximately $69,000.

In January of 2004, U. S. Steel received notice of a claim from the Texas Commission on Environmental Quality (TCEQ) and notice of claims from citizens of a cap failure at the Dayton Landfill. U. S. Steel’s allocated share is approximately 16 percent. The Remedial Action Plan for the site was approved by TCEQ in June 2009. Implementation of remedial measures was initiated in July 2010 and all fieldwork was completed in November 2011. On March 18, 2013, TCEQ approved the Response Action Completion Report. The accrued liability for U. S. Steel’s share to implement the post-closure monitoring program was $324,000 as of December 31, 2013.

In May 2010, MPCA notified Canadian National Railroad Company (CN) of apparent environmental impacts on their property adjacent to the former U. S. Steel Duluth Works. U. S. Steel subsequently obtained information indicating U. S. Steel’s connection to the site as well as reviewed a site investigation report that CN prepared and submitted to MPCA in August 2011. On December 6, 2011, U. S. Steel agreed to purchase the site and to take responsibility for addressing the identified environmental impacts. The property transaction was closed on June 26, 2012. As of December 31, 2013, U. S. Steel has an accrued liability of approximately $2 million.
The Canadian and Ontario governments have identified for remediation a sediment deposit, commonly referred to as Randle Reef, in Hamilton Harbor near ÁñÁ«ÊÓƵC’s Hamilton Works, for which the regulatory agencies estimate expenditures with a net present value of approximately C$120 million (approximately $113 million). The national and provincial governments have each allocated C$40 million (approximately $38 million) for this project. Local sources, including industry, have also agreed to provide funding of C$40 million (approximately $38 million) for this project. ÁñÁ«ÊÓƵC has committed to contribute approximately 11,000 tons of hot rolled steel and to fund C$2 million (approximately $2 million). The C$2 million (approximately $2 million) was contributed in 2013 and the steel contribution is expected to be made in 2014. As of December 31, 2013, the remaining contribution commitment is reflected on ÁñÁ«ÊÓƵC's balance sheet as a current liability of approximately C$8 million (approximately $8 million).

U. S. Steel is identified as a PRP at the former Breslube-Penn operating site, an oil recycling and solvent recovery operation located in Coraopolis, PA. U. S. Steel’s allocated share of the cost among the participating PRPs is approximately 29 percent. A Record of Decision was issued by the EPA in August 2007 and a Remedial Design was preliminarily approved in 2011 and is still under review by the agencies. As of December 31, 2013, U. S. Steel has an accrued liability of approximately $2 million reflecting U. S. Steel’s share of the cost to implement remedial measures at the site.

Item 4. MINE SAFETY DISCLOSURE

The information concerning mine safety violations and other regulatory matters required by Section 150 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and Item 104 of Regulation S-K is included in Exhibit 95 to this Form 10-K.


54

Table of Contents

EXECUTIVE OFFICERS OF THE REGISTRANT

The executive officers of U. S. Steel and their ages as of February 1, 2014, are as follows:

Name
 
Age
 
Title
 
Executive Officer
Since
George F. Babcoke
 
57
 
Senior Vice President – European Operations & Global Safety, President - ÁñÁ«ÊÓƵK
 
March 1, 2008
Anthony R. Bridge
 
59
 
Vice President – Engineering and Technology
 
February 25, 2014
David L. Britten
 
53
 
Senior Vice President – Tubular Operations
 
June 10, 2013
Larry T. Brockway
 
54
 
Senior Vice President, Chief Risk Officer and Treasurer
 
August 1, 2011
David B. Burritt
 
58
 
Executive Vice President & Chief Financial Officer
 
September 1, 2013
Suzanne Rich Folsom
 
52
 
General Counsel and Senior Vice President - Governmental Affairs
 
January 27, 2014
Mario Longhi
 
59
 
President and Chief Executive Officer
 
July 2, 2012
Douglas R. Matthews
 
48
 
Senior Vice President – North American Flat-Rolled Operations
 
July 2, 2012
Susan M. Suver
 
54
 
Senior Vice President – Human Resources and Administration
 
November 1, 2007
Michael S. Williams
 
53
 
Senior Vice President – Strategic Planning & Business Development
 
July 2, 2012
Gregory A. Zovko
 
52
 
Vice President & Controller
 
April 1, 2009

All of the executive officers mentioned above have held responsible management or professional positions with U. S. Steel or our subsidiaries for more than the past five years, with the exception of Mr. Longhi, Mr. Burritt, Mr. Britten and Ms. Folsom. Prior to joining U. S. Steel, Mr. Longhi served as president from 2005 to 2006, and president and chief executive officer from 2006 to 2011, of Gerdau Ameristeel Corporation, a producer of long steel products. Prior to joining Gerdau Ameristeel Corporation, Mr. Longhi served in a variety of senior management positions with Alcoa Inc., a producer of aluminum products. Prior to joining U. S. Steel, Mr. Burritt served as chief financial officer and vice president of global finance and strategic services for Caterpillar Inc., a manufacturer of construction and mining equipment, diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives, from 2004 to 2010. Prior to joining U. S. Steel, Mr. Britten served in various executive management positions with SSAB, a steel pipe and strip manufacturer, from 2008 to 2011. Prior to joining U. S. Steel, Ms. Folsom served as executive vice president, general counsel & chief compliance officer from 2011 - 2014 at ACADEMI LLC, a leading global innovative security solutions provider to the federal government and commercial clients. Prior to joining ACADEMI LLC, Ms. Folsom served as deputy general counsel and chief regulatory and compliance officer at the American Insurance Group (AIG) from 2008 - 2010.

Messrs. Longhi and Burritt will hold office until the annual election of executive officers by the Board of Directors following the next Annual Meeting of Stockholders, or until their earlier resignation, retirement or removal. Messrs. Babcoke, Bridge, Britten, Brockway, Matthews, Williams and Zovko and Mses. Folsom and Suver will hold office until their resignation, retirement or removal.

55

Table of Contents

PART II

Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Common Stock Information

The principal market on which U. S. Steel common stock is traded is the New York Stock Exchange. U. S. Steel common stock is also traded on the Chicago Stock Exchange. Information concerning the high and low sales price for the common stock as reported in the consolidated transaction reporting system and the frequency and amount of dividends paid during the last two years is set forth in “Selected Quarterly Financial Data (Unaudited)” on page F-58.

As of January 31, 2014, there were 16,779 registered holders of U. S. Steel common stock.

The Board of Directors intends to declare and pay dividends on U. S. Steel common stock based on the financial condition and results of operations of U. S. Steel, although it has no obligation under Delaware law or the U. S. Steel Certificate of Incorporation to do so. Dividends have been considered and declared by U. S. Steel on a quarterly basis. For all four quarters in 2013 and 2012, the dividend declared per share of U. S. Steel common stock was $0.05. Dividends on U. S. Steel common stock are limited to legally available funds.

Shareholder Return Performance

The graph below compares the yearly change in cumulative total shareholder return of our common stock with the cumulative total return of the Standard & Poor’s (S&P’s) 500 Stock Index and the S&P Steel Index.

Comparison of Cumulative Total Return
on $100 Invested in U.S. Steel Stock on December 31, 2008
vs
S&P 500 and S&P Steel Index

Recent Sales of Unregistered Securities

U. S. Steel had no sales of unregistered securities during the period covered by this report.


56

Table of Contents

Item 6. SELECTED FINANCIAL DATA

Dollars in millions (except per share data)
 
 
2013
 
2012
 
2011
 
2010
 
2009
Statement of Operations Data:
 
 
 
 
 
 
 
 
 
 
Net sales(a)
 
$
17,424

 
$
19,328

 
$
19,884

 
$
17,374

 
$
11,048

(Loss) income from operations(b)
 
(1,900
)
 
247

 
265

 
(111
)
 
(1,684
)
Net (loss) income attributable to ÁñÁ«ÊÓƵ(b)
 
(1,672
)
 
(124
)
 
(53
)
 
(482
)
 
(1,401
)
Per Common Share Data:
 
 
 
 
 
 
 
 
 
 
Net (loss) income attributable to ÁñÁ«ÊÓƵ(c) – basic
 
$
(11.56
)
 
$
(0.86
)
 
$
(0.37
)
 
$
(3.36
)
 
$
(10.42
)
                                                                          – diluted
 
(11.56
)
 
(0.86
)
 
(0.37
)
 
(3.36
)
 
(10.42
)
Dividends per share declared and paid
 
0.20

 
0.20

 
0.20

 
0.20

 
0.45

Balance Sheet Data – December 31:
 
 
 
 
 
 
 
 
 
 
Total assets(d)
 
$
13,143

 
$
15,217

 
$
16,073

 
$
15,350

 
$
15,422

Capitalization:
 
 
 
 
 
 
 
 
 
 
Debt(e)
 
$
3,939

 
$
3,938

 
$
4,228

 
$
3,733

 
$
3,364

ÁñÁ«ÊÓƵ stockholders’ equity
 
3,348

 
3,477

 
3,500

 
3,851

 
4,676

Total capitalization
 
$
7,287

 
$
7,415

 
$
7,728

 
$
7,584

 
$
8,040

(a)
For discussion of changes between the years 2013, 2012 and 2011, see “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.” The increase in net sales from 2010 to 2011 resulted mainly from increased volume and price due to improving domestic economic and energy market conditions. The increase in net sales from 2009 to 2010 resulted mainly from increased shipments and higher average realized prices due to the improving economic conditions.
(b)
For discussion of changes between the years 2013, 2012 and 2011, see “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.” The improvement from 2010 to 2011 resulted mainly from increased volume and price due to improving domestic economic and energy market conditions partially offset by increased raw materials, facility repairs and maintenance and other operating costs. The increase from 2009 to 2010 mainly resulted from higher prices and shipments due to the improving economic conditions as well as operating efficiencies due to increased capability utilization and reduced energy costs. These increases were partially offset by higher raw materials costs as well as increased costs for facility repair and maintenance costs due to more extensive structural inspection and repair activities in 2010.
(c)
See Note 6 to the Consolidated Financial Statements for the basis of calculating earnings per share.
(d)
For discussion of changes between the years 2013 and 2012 see “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.”
(e)
For discussion of changes between the years 2013 and 2012 see “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.” The decrease from 2011 to 2012 was mainly due to the redemption of our $300 million 5.65% Senior Notes due 2013. The increase from 2010 to 2011 was mainly due to outstanding borrowings of $380 million under our Receivables Purchase Agreement and outstanding borrowings under ÁñÁ«ÊÓƵK’s unsecured revolving credit facilities. The increase from 2009 to 2010 was mainly due to the issuance of $600 million of 7.375% Senior Notes due April 1, 2020 and the issuance of $70 million of 6.75% Recovery Zone Facility Bonds with a maturity date of 2040 partially offset by the repayment of the outstanding borrowings under ÁñÁ«ÊÓƵK’s unsecured revolving credit facilities.

57

Table of Contents

Item 7. MANAGEMENT’S DISCÁñÁ«ÊÓƵION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion should be read in conjunction with the Consolidated Financial Statements and related notes that appear elsewhere in this document.

Certain sections of Management’s Discussion and Analysis include forward-looking statements concerning trends or events potentially affecting the businesses of U. S. Steel. These statements typically contain words such as “anticipates,” “believes,” “estimates,” “expects” or similar words indicating that future outcomes are not known with certainty and are subject to risk factors that could cause these outcomes to differ significantly from those projected. In accordance with “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, these statements are accompanied by cautionary language identifying important factors, though not necessarily all such factors, that could cause future outcomes to differ materially from those set forth in forward-looking statements. For discussion of risk factors affecting the businesses of U. S. Steel see “Item 1A – Risk Factors” and “Supplementary Data – Disclosures About Forward-Looking Statements.”

Overview

According to the World Steel Association’s latest published statistics, U. S. Steel was the twelfth largest steel producer in the world in 2012. We believe we are currently the largest integrated steel producer headquartered in North America, one of the largest integrated flat-rolled producers in Central Europe and the largest tubular producer in North America. U. S. Steel has a broad and diverse mix of products and customers. U. S. Steel uses iron ore, coal, coke, steel scrap, zinc, tin and other metallic additions to produce a wide range of flat-rolled and tubular steel products, concentrating on value-added steel products for customers with demanding technical applications in the automotive, appliance, container, industrial machinery, construction and oil, gas and petrochemical industries. In addition to our facilities in the United States, U. S. Steel has significant operations in Canada through U. S. Steel Canada (ÁñÁ«ÊÓƵC) and in Europe through U. S. Steel Košice (ÁñÁ«ÊÓƵK), located in Slovakia. U. S. Steel’s financial results are primarily determined by the combined effects of shipment volume, selling prices, production costs and product mix. While the operating results of our various businesses are affected by a number of business-specific factors (see “Item 1. Business – Steel Industry Background and Competition”), the primary drivers for U. S. Steel are general economic conditions in North America, Europe and, to a lesser extent, other steel-consuming regions; the levels of worldwide steel production and consumption; pension and other benefits costs; and raw materials (iron ore, coal, coke, steel scrap, zinc, tin and other metallic additions) and energy (natural gas and electricity) costs.

U. S. Steel’s long-term success depends on our ability to earn a competitive return on capital employed by implementing our strategy to be a world leader in safety and environmental stewardship; to continue to increase our value-added product mix; to further expand our global business platform; to maintain a strong capital structure and liquidity position; to continue to improve our reliability and cost competitiveness; and to attract and retain a diverse and talented workforce. For a fuller description of our strategy, see “Item 1. Business – Business Strategy.” Some of the other key issues which are impacting the global steel industry, including U. S. Steel, are the level of unfunded pension and other benefits obligations; the degree of industry consolidation; the impact of production and consumption of steel in China and other developing countries; the expansion of production facilities inside the U. S.; and the levels of steel imports into the markets we serve.

2013 marked the start of the transformation of U. S. Steel as we execute on our shareholder value creation strategy: earn the right to grow, and drive and sustain profitable growth. Through a disciplined approach we now refer to as “The Carnegie Way,” we are working to strengthen our balance sheet, with more intense focus on cash flow, and have launched a series of initiatives that we believe will enable us to add value, get leaner faster, right-size, and improve our performance across our core business process capabilities, including commercial, supply chain, manufacturing, procurement, innovation, and operational and functional support. We are on a mission to define and create a sustainable competitive advantage with a relentless focus on economic profit, our customers, our cost structure and innovation.

Critical Accounting Estimates

Management’s discussion and analysis of U. S. Steel’s financial condition and results of operations is based upon U. S. Steel’s financial statements, which have been prepared in accordance with accounting standards generally accepted in the United States (U.S. GAAP). The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities at year-end and the reported amount of revenues and expenses during the year. Management regularly evaluates these estimates, including those related to employee benefits liabilities and assets held in trust

58

Table of Contents

relating to such liabilities; the carrying value of property, plant and equipment; goodwill and intangible assets; valuation allowances for receivables, inventories and deferred income tax assets; liabilities for deferred income taxes, potential tax deficiencies, environmental obligations and potential litigation claims and settlements. Management’s estimates are based on historical experience, current business and market conditions, and various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ materially from current expectations under different assumptions or conditions.

Management believes that the following are the more significant judgments and estimates used in the preparation of the financial statements.
Goodwill and identifiable intangible assets - Goodwill represents the excess of the cost over the fair value of acquired identifiable tangible and intangible assets and liabilities assumed from businesses acquired. Goodwill is tested for impairment at the reporting unit level, which could be an operating segment or a component of an operating segment, annually in the third quarter and whenever events or circumstances indicate the carrying value may not be recoverable. The evaluation of impairment involves using either a qualitative or quantitative approach as outlined in Accounting Standards Codification (ASC) Topic 350. U. S. Steel used a quantitative approach for its 2013 annual goodwill impairment test by comparing the estimated fair value of its associated reporting units to their carrying values, including goodwill. We had two reporting units that included nearly all of our goodwill: our Flat-rolled reporting unit and our Texas Operations reporting unit, which is part of our Tubular operating segment.
The evaluation of goodwill impairment involves using either a qualitative or quantitative approach as outlined in ASC Topic 350. U. S. Steel completed its annual goodwill impairment evaluation using the two-step quantitative analysis during the third quarter of 2013 and determined that all of the goodwill within its Flat-rolled and Texas Operations reporting units was impaired. U. S. Steel’s Flat-rolled and Texas Operations reporting units had $969 million and $837 million of goodwill, respectively.
Under the quantitative approach, a two-step goodwill impairment test is required. Under the two-step goodwill impairment test, U. S. Steel first compares the estimated fair value of each reporting unit to its carrying value. Fair value is determined in accordance with the guidance in ASC Topic 820 which requires consideration of the income, market and cost approaches as applicable. Generally, the market approach and income approach are most relevant in the fair value measurement of our reporting units. If the carrying value of a reporting unit exceeds its fair value, U. S. Steel then performs the second step of the impairment test in order to determine the implied fair value of the reporting units goodwill. If the carrying value of a reporting units goodwill exceeds its implied fair value, U. S. Steel records an impairment charge equal to the difference. U. S. Steel may engage an independent valuation firm to assist management with the valuation.
The valuation methodologies used for the 2013 impairment analysis to determine fair value under step one, with the assistance of a third party valuation specialist in the case of the Texas Operations reporting unit, were a market approach and an income approach.

For purposes of the income approach, fair value was determined based on the present value of estimated future cash flows, discounted at an appropriate risk-adjusted rate (DCF analysis). U. S. Steel made assumptions about the amount and timing of future expected cash flows, terminal value growth rates and appropriate discount rates. The amount and timing of future cash flows within U. S. Steel’s DCF analysis was based on its most recent operational budgets, long range strategic plans and other estimates including probability weighting of cash flow scenarios. A three percent perpetual growth rate was used to calculate the value of cash flows beyond the last projected period in U. S. Steel’s DCF analysis and reflects its best estimates for stable, perpetual growth of its reporting units. Actual results may differ from those assumed in U. S. Steel’s forecasts. U. S. Steel used estimates of market participant weighted average cost of capital as a basis for determining the discount rates applied to its reporting units’ future expected cash flows, adjusted for risks and uncertainties inherent in the steel industry and in its internally developed forecasts. A discount rate of 10 percent was used for both reporting units.
The market approach is based upon an analysis of valuation metrics for companies comparable to each reporting unit. Fair values for the Flat-rolled and Texas Operations reporting units were estimated using an appropriate valuation multiple, as well as estimated normalized earnings and an estimated control premium.
After weighting the income and market approaches, the 2013 annual goodwill impairment test showed that the carrying values of our Flat-rolled and Texas Operations reporting units exceeded their estimated fair values by approximately 8 percent and 68 percent, respectively. In order to validate the reasonableness of the estimated fair values of the

59

Table of Contents

reporting units as of the valuation date, a reconciliation of the aggregate fair values of all reporting units to market capitalization was performed using a reasonable control premium. We further validated the reasonableness of the estimated fair values of our reporting units using other valuation metrics that included data from U. S Steel's historical transactions as well as published industry analyst reports.
The fair value of a reporting unit is sensitive to input assumptions from our budgets, cash flow forecasts and discount rate. Further, estimates of the perpetual growth rate and terminal value are key factors used to determine the fair value. As part of the impairment evaluation process, management analyzes the sensitivity of fair value to various underlying assumptions. The level of scrutiny increases as the difference between fair value and carrying amount decreases. Changes in any of the assumptions could result in management reaching a different conclusion regarding the potential impairment, which could be material. Our impairment evaluations inherently involve uncertainties from uncontrollable events that could positively or negatively impact the anticipated future economic and operating conditions.
The impairment of the North American Flat-rolled reporting unit’s goodwill was primarily driven by the valuation effects of the protracted economic recovery and excess global steelmaking capacity. The impairment of the Texas Operations reporting unit’s goodwill was primarily driven by the adverse price and volume effects of an increased supply of welded tubular products in the U.S. market from the continued high level of tubular product imports and announced additional domestic tubular manufacturing capacity. Due to these factors, U. S. Steel decreased the long term estimates of its operating results and cash flows utilized in assessing goodwill for impairment, which resulted in a total non-cash goodwill impairment charge of approximately $1.8 billion.
Intangible assets with indefinite lives are also subject to at least annual impairment testing, which compares the fair value of the intangible assets with their carrying amounts. U. S. Steel has determined that certain of its acquired intangible assets have indefinite useful lives. These assets are also reviewed for impairment annually in the third quarter and whenever events or circumstances indicate the carrying value may not be recoverable. U. S. Steel completed its evaluation of its indefinite lived water rights during the third quarter of 2013 and determined on the basis of qualitative factors, there was no indication of impairment.

Identifiable intangible assets with finite lives are amortized on a straight-line basis over their estimated useful lives and are reviewed for impairment whenever events or circumstances indicate that the carrying value of the assets exceed their projected undiscounted cash flows. During the third quarter of 2013, U. S. Steel completed a review of its identifiable intangible assets with finite lives, primarily customer relationships, and determined that the assets were not impaired.

Inventories –LIFO (last-in, first-out) is the predominant method of inventory costing for inventories in the United States and FIFO (first-in, first-out) is the predominant method used in Canada and Europe. The LIFO method of inventory costing was used on 59 percent and 56 percent of consolidated inventories at December 31, 2013 and 2012, respectively. Changes in U.S. GAAP rules or tax law, such as the elimination of the LIFO method of accounting for inventories, could negatively affect our profitability and cash flow.

Equity Method Investments – Investments in entities over which U. S. Steel has significant influence are accounted for using the equity method of accounting and are carried at U. S. Steel’s share of net assets plus loans, advances and our share of earnings less distributions. Differences in the basis of the investment and the underlying net asset value of the investee, if any, are amortized into earnings over the remaining useful life of the associated assets.

Income from investees includes U. S. Steel’s share of income from equity method investments, which is generally recorded a month in arrears, except for significant and unusual items which are recorded in the period of occurrence. Gains or losses from changes in ownership of unconsolidated investees are recognized in the period of change. Intercompany profits and losses on transactions with equity investees have been eliminated in consolidation subject to lower of cost or market inventory adjustments.

U. S. Steel evaluates impairment of its equity method investments whenever circumstances indicate that a decline in value below carrying value is other than temporary. Under these circumstances, we would adjust the investment down to its estimated fair value, which then becomes its new carrying value. During the third quarter of 2013, U. S. Steel completed a review of its equity method investments and determined there were no impairments.

Pensions and Other Benefits – The recording of net periodic benefit costs for defined benefit pensions and other benefits is based on, among other things, assumptions of the expected annual return on plan assets, discount rate, mortality, escalation or other changes in retiree health care costs and plan participation levels. Changes in the assumptions or differences between actual and expected changes in the present value of liabilities or assets of

60

Table of Contents

U. S. Steel’s plans could cause net periodic benefit costs to increase or decrease materially from year to year as discussed below.

U. S. Steel’s investment strategy for its U.S. pension and other benefits plan assets provides for a diversified mix of public equities, high quality bonds and selected smaller investments in private equities, investment trusts and partnerships, timber and mineral interests. For its U.S. Pension and Other Benefit plans, U. S. Steel has a target allocation for plan assets of 60 percent and 70 percent in equities, respectively, with the balance primarily invested in corporate bonds, Treasury bonds and government-backed mortgages. U. S. Steel believes that returns on equities over the long term will be higher than returns from fixed-income securities as actual historical returns from U. S. Steel’s trusts have shown. Returns on bonds tend to offset some of the short-term volatility of stocks. Both equity and fixed-income investments are made across a broad range of industries and companies to provide protection against the impact of volatility in any single industry as well as company specific developments. U. S. Steel will use a 7.75 percent assumed rate of return on assets for the development of net periodic cost for the main defined benefit pension plan and domestic other post-employment benefit (OPEB) plans in 2014. The 2014 assumed rate of return is the same as the rate of return used for 2013 domestic expense and was determined by taking into account the intended asset mix and some moderation of the historical premiums that fixed-income and equity investments have yielded above government bonds. Actual returns since the inception of the plans have exceeded this 7.75 percent rate and while recent annual returns have been volatile, it is U. S. Steel’s expectation that rates will achieve this level in future periods.

For ÁñÁ«ÊÓƵC defined benefit pension plans, U. S. Steel’s investment strategy is similar to its strategy for U.S. plans, whereby the Company seeks a diversified mix of large and mid-cap equities, high quality corporate and government bonds and selected smaller investments with a target allocation for plan assets of 65 percent equities. U. S. Steel will use a 7.25 percent assumed rate of return on assets for the development of net periodic costs for the ÁñÁ«ÊÓƵC defined benefit expense in 2014. This is lower than the U.S. pension plan assumption as subcategories within the asset mix are from a more limited investment universe and, as a result, have a lower expected return. The 2014 assumed rate of return is the same as the rate of return used for 2013 ÁñÁ«ÊÓƵC expense.

The expected long-term rate of return on plan assets is applied to the market value of assets as of the beginning of the period less expected benefit payments and considering any planned contributions.

To determine the discount rate used to measure our pension and other benefit obligations, certain corporate bond rates are utilized for both U.S. GAAP and funding purposes. As a result of an increase in interest rates at December 31, 2013, as compared to December 31, 2012, U. S. Steel increased the discount rate used to measure both domestic pension and other benefits obligations to 4.5 percent from 3.75 percent. The discount rate reflects the current rate at which we estimate the pension and other benefits liabilities could be effectively settled at the measurement date. In setting the domestic rates, we utilize several AAA and AA corporate bond rates as an indication of interest rate movements and levels. For Canadian benefit plans, a discount rate was selected through a similar review process using Canadian bond rates and indices and at December 31, 2013, U. S. Steel increased the discount rate to 4.5 percent from 3.75 percent for its Canadian-based pension and other benefits.

Mortality assumptions for the U.S. defined benefit pension and other postretirement liabilities for formerly represented retirees is based on a custom table developed by an experience study performed in 2005. During 2013, the Company examined experience since 2005 and it was determined that the Company's mortality experience has improved. As a result of the study, the prior table now assumes mortality improvement of 7 years from the date of liability measurement for this population and our projected benefit obligations increased by approximately $350 million.

U. S. Steel reviews its own actual historical rate experience and expectations of future health care cost trends to determine the escalation of per capita health care costs under U. S. Steel’s benefit plans. About two thirds of our costs for the domestic United Steelworkers (USW) participants’ retiree health benefits in the Company’s main domestic benefit plan are limited to a per capita dollar maximum calculation based on 2006 base year actual costs incurred under the main U. S. Steel benefit plan for USW participants (cost cap). After 2015, the Company’s costs for a majority of USW retirees and their dependents are expected to remain fixed with the full application of the cost cap and as a result, the cost impact of health care escalation for the Company is projected to be limited for this group (See Note 16 to the Consolidated Financial Statements). For measurement of its domestic retiree medical plans where health care cost escalation is applicable, U. S. Steel has assumed an initial escalation rate of 7.0 percent for 2014. This rate is assumed to decrease gradually to an ultimate rate of 5.0 percent in 2018 and remain at that level thereafter. For measurement of its Canadian retiree medical plans, U. S. Steel has assumed an initial escalation rate of 6.0 percent for 2014. This rate is assumed to decrease gradually to an ultimate rate of 5.0 percent in 2018 and remain at that level thereafter.


61

Table of Contents

Net periodic pension cost, including multiemployer plans, is expected to total approximately $330 million in 2014 compared to $396 million in 2013. The decrease in expected expense in 2014 is primarily due to the natural maturation of our pension plans, a higher market related value of assets and an increase in the discount rate, partially offset by the improvement in mortality. Total other benefits costs in 2014 are expected to be approximately $15 million, compared to $55 million in 2013. The decrease in expected expense in 2014 is primarily a result of favorable claims cost experience, a higher market related value of assets, and the natural maturation of the plan, partially offset by changes in mortality assumptions.

A sensitivity analysis of the projected incremental effect of a hypothetical one percentage point change in the significant assumptions used in the pension and other benefits calculations is provided in the following table:

 
 
Hypothetical Rate
Increase  (Decrease)
(In millions)
 
1%
 
(1)%
Expected return on plan assets
 
 
 
 
Incremental (decrease) increase in:
 
 
 
 
Net periodic pension costs for 2014
 
$
(100
)
 
$
100

Discount rate
 
 
 
 
Incremental (decrease) increase in:
 
 
 
 
Net periodic pension & other benefits costs for 2014
 
$
(39
)
 
$
55

Pension & other benefits obligations at December 31, 2013
 
$
(1,191
)
 
$
1,418

Health care cost escalation trend rates
 
 
 
 
Incremental increase (decrease) in:
 
 
 
 
Other postretirement benefit obligations
 
$
191

 
$
(161
)
Service and interest costs components
 
$
10

 
$
(8
)

Changes in the assumptions for expected annual return on plan assets and the discount rate used for accounting purposes do not impact the funding calculations used to derive minimum funding requirements for the pension plans. However, the discount rates required for minimum funding purposes are also based on corporate bond related indices and as such, the same general sensitivity concepts as above can be applied to increases or decreases to the funding obligations of the plans assuming the same hypothetical rate changes. (See Note 16 to the Consolidated Financial Statements for a discussion regarding legislation enacted in July 2012 that impacts the discount rate used for funding purposes.) For further cash flow discussion see “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Financial Condition, Cash Flows and Liquidity – Liquidity.”

Long-lived assets – U. S. Steel evaluates long-lived assets, primarily property, plant and equipment for impairment whenever changes in circumstances indicate that the carrying amounts of those productive assets exceed their projected undiscounted cash flows. We evaluate the impairment of long-lived assets at the asset group level. During the third quarter of 2013, U. S. Steel completed a review of its long-lived assets and determined that the assets were not impaired.

Taxes U. S. Steel records a valuation allowance to reduce deferred tax assets to the amount that is more likely than not to be realized. A full valuation allowance was recorded for the net Canadian deferred tax asset primarily due to cumulative losses in Canada. Accordingly, losses in Canada do not generate a tax benefit for accounting purposes. If evidence changes and it becomes more likely than not that the Company will realize the Canadian deferred tax asset, the valuation allowance would be partially or fully reversed. Any reversal of this amount would result in a decrease to income tax expense. Likewise, should U. S. Steel determine that it would not be able to realize all or part of its deferred tax assets in the future, an adjustment to the valuation allowance for deferred tax assets would be charged to income tax expense in the period such determination was made. U. S. Steel expects to generate future taxable income to realize the benefits of its net deferred tax assets other than for Canada.

In general, the amount of tax expense or benefit from continuing operations is determined without regard to the tax effects of other categories of income or loss, such as other comprehensive income. However, an exception to this rule applies when there is a loss from continuing operations and income from other categories. This exception requires that income from discontinued operations, extraordinary items, and items recorded directly in other comprehensive

62

Table of Contents

income be considered in determining the amount of tax benefit resulting from a loss in continuing operations. This exception affects the allocation of the tax provision among categories of income.

U. S. Steel makes no provision for deferred U.S. income taxes on undistributed foreign earnings because as of December 31, 2013, it remained management’s intention to continue to indefinitely reinvest such earnings in foreign operations, where appropriate. Undistributed foreign earnings and profits for U.S. income tax purposes, which includes intercompany interest, amounted to approximately $830 million at December 31, 2013 compared to $2.7 billion at the end of 2012. If such tax earnings and profits were not indefinitely reinvested, a U.S. deferred tax liability of approximately $280 million would have been required. This decrease in undistributed foreign earnings and profits for U.S. income tax purposes is mainly attributable to an election effective December 31, 2013 to liquidate for U.S. income tax purposes a foreign subsidiary that holds most of our international operations. See Note 8 to the Consolidated Financial Statements.

U. S. Steel records liabilities for potential tax deficiencies. These liabilities are based on management’s judgment of the risk of loss for items that have been or may be challenged by taxing authorities. In the event that U. S. Steel were to determine that tax-related items would not be considered deficiencies or that items previously not considered to be potential deficiencies could be considered potential tax deficiencies (as a result of an audit, court case, tax ruling or other authoritative tax position), an adjustment to the liability would be recorded through income in the period such determination was made.

Environmental Remediation In the United States, U. S. Steel has been notified that we are a potentially responsible party (PRP) at 21 sites under CERCLA as of December 31, 2013. In addition, there are 11 sites related to U. S. Steel where we have received information requests or other indications that we may be a PRP under CERCLA but where sufficient information is not presently available to confirm the existence of liability or make any judgment as to the amount thereof. There are also 35 additional sites related to U. S. Steel where remediation is being sought under other environmental statutes, both federal and state, or where private parties are seeking remediation through discussions or litigation. At many of these sites, U. S. Steel is one of a number of parties involved and the total cost of remediation, as well as U. S. Steel’s share thereof, is frequently dependent upon the outcome of investigations and remedial studies. U. S. Steel accrues for environmental remediation activities when the responsibility to remediate is probable and the amount of associated costs is reasonably determinable. As environmental remediation matters proceed toward ultimate resolution or as additional remediation obligations arise, charges in excess of those previously accrued may be required. See Note 24 to the Consolidated Financial Statements.
For discussion of relevant environmental items, see “Part I. Item 3. Legal Proceedings—Environmental Proceedings.”
At December 31, 2013, U. S. Steel recorded a net increase of $30 million to our accrued balance for environmental matters for U.S. and international facilities. The increase is primarily due to a $32 million environmental remediation charge in connection with the definition of the expanded scope of the St. Louis Estuary and Upland project. The total accrual for such liabilities at December 31, 2013 was $233 million. These amounts exclude liabilities related to asset retirement obligations, disclosed in Note 17 to the Consolidated Financial Statements.
U. S. Steel is the subject of, or a party to, a number of pending or threatened legal actions, contingencies and commitments involving a variety of matters, including laws and regulations relating to the environment. The ultimate resolution of these contingencies could, individually or in the aggregate, be material to the financial statements. However, management believes that U. S. Steel will remain a viable and competitive enterprise even though it is possible these contingencies could be resolved unfavorably.

Segments

U. S. Steel has three reportable operating segments: Flat-rolled Products (Flat-rolled), U. S. Steel Europe (ÁñÁ«ÊÓƵE) and Tubular Products (Tubular). The results of several operating segments that do not constitute reportable segments are combined and disclosed in the Other Businesses category.

The Flat-rolled segment includes the operating results of U. S. Steel’s North American integrated steel plants and equity investees involved in the production of slabs, rounds, strip mill plates, sheets and tin mill products, as well as all iron ore and coke production facilities in the United States and Canada. These operations primarily serve North American customers in the service center, conversion, transportation (including automotive), construction, container, and appliance and electrical markets. Flat-rolled supplies steel rounds and hot-rolled bands to Tubular. On December 31, 2013, U. S. Steel permanently shut down its iron and steelmaking facilities at Hamilton Works.


63

Table of Contents

Subsequent to December 31, 2013, Flat-rolled's annual raw steel production capability is 22.0 million tons. Prior to that date, Flat-rolled had annual raw steel production capability of 24.3 million tons. Raw steel production was 17.9 million tons in 2013, 19.1 million tons in 2012 and 18.6 million tons in 2011. Raw steel production averaged 74 percent of capability in 2013, 78 percent of capability in 2012 and 77 percent of capability in 2011.

The ÁñÁ«ÊÓƵE segment includes the operating results of ÁñÁ«ÊÓƵK, U. S. Steel’s integrated steel plant and coke production facilities in Slovakia. Prior to January 31, 2012, the ÁñÁ«ÊÓƵE segment also included the operating results of ÁñÁ«ÊÓƵS, U. S. Steel’s integrated steel plant and other facilities in Serbia, and an equity investee, which were sold on January 31, 2012 (see Note 4 to the Consolidated Financial Statements). ÁñÁ«ÊÓƵE primarily serves customers in the European construction, service center, conversion, container, transportation (including automotive), appliance and electrical, and oil, gas and petrochemical markets. ÁñÁ«ÊÓƵE produces and sells slabs, sheet, strip mill plate, tin mill products and spiral welded pipe, as well as heating radiators and refractory ceramic materials.

Subsequent to January 31, 2012, ÁñÁ«ÊÓƵE’s annual raw steel production capability is 5.0 million tons. Prior to that date, ÁñÁ«ÊÓƵE had annual raw steel production capability of 7.4 million tons. ÁñÁ«ÊÓƵE’s raw steel production was 4.6 million tons in 2013, 4.5 million tons in 2012 and 5.6 million tons in 2011. ÁñÁ«ÊÓƵE’s raw steel production averaged 92 percent of capability in 2013, 87 percent of capability in 2012 and 76 percent of capability in 2011.

The Tubular segment includes the operating results of U. S. Steel’s tubular production facilities, located primarily in the United States, and equity investees in the United States and Brazil. These operations produce and sell seamless and electric resistance welded (ERW) steel casing and tubing (commonly known as oil country tubular goods or OCTG), standard and line pipe and mechanical tubing and primarily serve customers in the oil, gas and petrochemical markets. Tubular’s annual production capability is 2.8 million tons.

All other U. S. Steel businesses not included in reportable segments are reflected in Other Businesses. These businesses include railroad services and real estate operations.

For further information, see Note 3 to the Consolidated Financial Statements.

Net Sales

64

Table of Contents

Net Sales by Segment
(Dollars in millions, excluding intersegment sales)
 
2013
 
2012
 
2011
Flat-rolled
 
$
11,572

 
$
12,908

 
$
12,367

ÁñÁ«ÊÓƵE
 
2,941

 
2,949

 
4,306

Tubular
 
2,772

 
3,283

 
3,034

Total sales from reportable segments
 
17,285

 
19,140

 
19,707

Other Businesses
 
139

 
188

 
177

Net sales
 
$
17,424

 
$
19,328

 
$
19,884


Management’s analysis of the percentage change in net sales for U. S. Steel’s reportable business segments is set forth in the following tables:

Year Ended December 31, 2013 versus Year Ended December 31, 2012

 
 
Steel Products(a)
 
 
 
 
Volume
 
Price
 
Mix
 
FX(b)
 
Other
 
Net
Change
Flat-rolled
 
(7
)%
 
(3
)%
 
1
 %
 
%
 
(1
)%
 
(10
)%
ÁñÁ«ÊÓƵE
 
5
 %
 
(6
)%
 
(2
)%
 
3
%
 
 %
 
 %
Tubular
 
(7
)%
 
(10
)%
 
1
 %
 
%
 
 %
 
(16
)%
(a)
Excludes intersegment sales
(b)
Foreign currency translation effects

The decrease in sales for the Flat-rolled segment primarily reflected lower shipments (decrease of 1.3 million net tons) primarily as a result of a labor dispute at the Lake Erie Works and lower average realized prices (decrease of $15 per net ton) as a result of downward pressure on spot market pricing. Sales for the European segment remained consistent as increased shipments (increase of 184 thousand net tons) were offset by lower average realized euro-based prices (decrease of 46 per net ton). The decrease in sales for the Tubular segment reflected lower average realized prices (decrease of $157 per net ton) and lower shipments (decrease of 129 thousand net tons) as a result of decreased drilling activity and continued high levels of imports for which a trade case is pending.

65

Table of Contents


Year Ended December 31, 2012 versus Year Ended December 31, 2011

 
 
Steel Products(a)
 
 
 
 
Volume
 
Price
 
Mix
 
FX(b)
 
Other
 
Net
Change
Flat-rolled
 
4
 %
 
(2
)%
 
 %
 
 %
 
2
%
 
4
 %
ÁñÁ«ÊÓƵE
 
(21
)%
 
(4
)%
 
(1
)%
 
(6
)%
 
%
 
(32
)%
Tubular
 
4
 %
 
4
 %
 
 %
 
 %
 
%
 
8
 %
(a)
Excludes intersegment sales
(b)
Foreign currency translation effects

The increase in sales for the Flat-rolled segment primarily reflected increased shipments (increase of 465 thousand net tons) partially offset by lower average realized prices (decrease of $9 per net ton). The decrease in sales for the European segment primarily reflected decreased shipments (decrease of 1.1 million net tons) primarily due to the sale of ÁñÁ«ÊÓƵS, lower average realized euro-based prices (decrease of 30 per net ton) and the strengthening of the U.S. dollar versus the euro in 2012 compared to 2011. The increase in sales for the Tubular segment resulted primarily from higher average realized prices (increase of $75 per net ton) and increased shipments (increase of 74 thousand net tons) as a result of increased drilling activity.

Operating Expenses

Union profit-sharing costs

 
 
Year Ended December 31
(Dollars in millions)
 
2013
 
2012
 
2011
Allocated to segment results
 
$
31

 
$
53

 
$
37


Profit-based amounts per the agreements with the USW are calculated and paid on a quarterly basis as a percentage of consolidated income from operations (as defined in the agreements) based on 7.5 percent of profit between $10 and $50 per ton and 10 percent of profit above $50 per ton.

The amounts above represent profit-sharing amounts to active USW-represented employees (excluding employees of ÁñÁ«ÊÓƵC) and are included in cost of sales on the statement of operations.

Pension and other benefits costs

Defined benefit and multiemployer pension plan costs totaled $396 million in 2013, $412 million in 2012 and $443 million during 2011. Plan costs in 2013 included $11 million of settlement and curtailment costs. Excluding these costs, the $27 million decrease in expense from 2012 to 2013, and the $31 million decrease in expense from 2011 to 2012 is primarily due to the natural maturation of our pension plans and a higher market related value of assets, partially offset by a decrease in the discount rate. U. S. Steel calculates its market-related value of assets such that investment gains or losses as compared to expected returns are recognized over a three-year period. To the extent that deferred gains and losses on plan assets are not yet reflected in this calculated value, the amounts do not impact expected asset returns or the net actuarial gains or losses subject to amortization within the net periodic pension expense calculation. (See Note 16 to the Consolidated Financial Statements.)

The pension stabilization legislation enacted in 2012 includes a revised interest rate formula used to measure defined benefit pension obligations for calculating minimum annual contributions. The new interest rate formula is expected to result in higher interest rates for minimum funding calculations compared to prior law over the next few years which will improve the funded status of our main defined benefit pension plan and reduce minimum required contributions. U. S. Steel made voluntary contributions to our main U.S. defined benefit plan of $140 million in 2013 and for several prior years. U. S. Steel will likely make voluntary contributions of similar amounts in future periods to mitigate potentially larger mandatory contributions in later years. Assuming future asset performance consistent with our expected long-term earnings rate assumption of 7.75 percent, we anticipate that the pension stabilization legislation interest rate changes will allow us to continue to make voluntary contributions of approximately $140 million per year through 2015 before we could be required to contribute more than that amount should the current low interest rate environment persist.


66

Table of Contents

The foregoing statements regarding future minimum required cash contributions to our main defined benefit pension plan are forward-looking statements. Factors that may affect our future minimum required contributions to our main defined benefit pension plan include: any voluntary contributions that we may make, future pension plan asset performance, actual interest rates under the law, and the impacts of business acquisitions or divestitures, union negotiated benefit changes and future government regulations.

Costs related to defined contribution plans totaled $47 million during 2013, $42 million during 2012 and $37 million during 2011.

Other benefits costs, which are included in income from operations, totaled $55 million in 2013, $100 million in 2012 and $159 million in 2011. The decrease in expense from 2012 to 2013 is primarily due to benefit and plan design changes that resulted from the 2012 Labor Agreements. The decrease in expense from 2011 to 2012 is primarily a result of Medicare program changes.

For additional information on pensions and other benefits, see Note 16 to the Consolidated Financial Statements.

Selling, general and administrative expenses

Selling, general and administrative expenses were $610 million in 2013, $654 million in 2012 and $733 million in 2011. The decrease from 2012 to 2013 is primarily related to a decrease in pension and other benefits costs, as discussed above. The decrease from 2011 to 2012 is primarily related to the sale of ÁñÁ«ÊÓƵS.

Depreciation, depletion and amortization

Depreciation, depletion and amortization expenses were $684 million in 2013, $661 million in 2012 and $681 million in 2011.

Restructuring and Other Charges
During the fourth quarter of 2013, the Company implemented certain headcount reductions and production facility closures related to our iron and steelmaking facilities at Hamilton Works in Canada, barge operations related to Warrior and Gulf Navigation (WGN) in Alabama and administrative headcount reductions at our Hamilton Works and Lake Erie Works also in Canada. We closed our iron and steelmaking facilities at Hamilton Works effective December 31, 2013.
Charges for restructuring and ongoing cost reduction initiatives are recorded in the period the Company commits to a restructuring or cost reduction plan or executes specific actions contemplated by the plan, and all criteria for liability recognition have been met.
Management continues to review all of the Company’s operations and production facilities to appropriately align its cost structure relative to prevailing economic and industry conditions. We closed our iron and steelmaking facilities at Hamilton Works to improve the performance of the Company’s Canadian operations. These operations have not been profitable in comparison to other steelmaking operations within the Company’s Flat-rolled reporting segment. Management will continue to evaluate all operations to ensure the Company's cost structure has been optimized in relation to the overall integrated production strategy.
Management believes its actions with regard to the Company’s Canadian operations will have a positive impact on the Company’s cash flows of approximately $40 million over the course of subsequent periods as a result of decreased payroll and benefits costs and other idle facility costs. Additionally, management does not believe there will be any significant impacts related to the Company’s revenues as a result of this restructuring.
Severance and accelerated depreciation charges recognized in the fourth quarter of 2013 related to the Canadian operations were approximately $16 million and $217 million, respectively. Charges recognized during the fourth quarter of 2013 associated with the closure of WGN barge operations were approximately $11 million, which included $6 million in exit costs and $5 million in accelerated depreciation. These costs are not included in the measure of segment performance for any of our reportable segments (see Note 3 to the Consolidated Financial Statements). There were no such similar charges in 2012 or 2011.
Funding for the charges are expected to be made from the Company’s continuing operations in fiscal 2014 and 2015.


67

Table of Contents

The following table displays the activity and balances of the restructuring and other charges liability accounts for the year-end:

 
 
Severance
 
Exit
 
Accelerated
 
(in millions)
 
Accrual
 
Costs
 
Depreciation
 
 
 
 
 
 
 
 
 
Balance at December 31, 2012
 
$

 
$

 
$

 
 
 
 
 
 
 
 
 
Additional charges
 
16

 (a) 
6

 (b) 
222

 (c) 
Cash payments/utilization
 

 

 
(222
)
 
Other adjustments and re-classes
 

 

 

 
 
 
 
 
 
 
 
 
Balance at December 31, 2013
 
$
16

 
$
6

 
$

 

(a) Amount relates to charges recognized for severance benefits for approximately 180 employees terminated at Hamilton Works and Lake Erie Works and excludes associated pension curtailment charges of approximately $4 million (see Note 16 to the Consolidated Financial Statements).
(b) Amount relates to exits costs associated with the closure of the Warrior and Gulf Navigation Company.
(c) Accelerated depreciation charges are related to the closure of the iron and steelmaking facilities at Hamilton Works and assets related to WGN.
    
    

68

Table of Contents

Income (Loss) from Operations(a) 

 
 
Year Ended December 31,
(Dollars in Millions)
 
2013
 
2012
 
2011
Flat-rolled
 
$
105

 
$
400

 
$
469

ÁñÁ«ÊÓƵE(b)
 
28

 
34

 
(162
)
Tubular
 
190

 
366

 
316

Total income from reportable segments
 
323

 
800

 
623

Other Businesses
 
77

 
55

 
46

Reportable segments and Other Businesses income from operations
 
400

 
855

 
669

Postretirement benefit expenses(c)
 
(221
)
 
(297
)
 
(386
)
Other items not allocated to segments:
 
 
 
 
 
 
Impairment of goodwill (Note 11)
 
(1,806
)
 

 

Restructuring and other charges (Note 23)
 
(248
)
 

 

Environmental remediation charge
 
(32
)
 

 
(18
)
Write-off of equity investment (Note 9)
 
(16
)
 

 

Supplier contract dispute settlement
 
23

 
15

 

Net loss on the sale of assets (Note 4)
 

 
(310
)
 

Labor agreement lump sum payments (Note 15)
 

 
(35
)
 

Property tax settlements
 

 
19

 

Total (loss) income from operations
 
$
(1,900
)
 
$
247

 
$
265

(a)
See Note 3 to the Consolidated Financial Statements for reconciliations and other disclosures required by Accounting Standards Codification Topic 280.
(b)
Includes the results of ÁñÁ«ÊÓƵS through the disposition date of January 31, 2012. See Note 4 to the Consolidated Financial Statements.
(c)
Consists of the net periodic benefit cost elements, other than service cost and amortization of prior service cost for active employees, associated with our pension, retiree health care and life insurance benefit plans.

Gross Margin by Segment
(ÁñÁ«ÊÓƵE includes the results of ÁñÁ«ÊÓƵS through the disposition date of January 31, 2012) 
 
 
Year Ended December 31,
 
 
2013
 
2012
 
2011
Flat-rolled
 
7
%
 
8
%
 
9
%
ÁñÁ«ÊÓƵE
 
7
%
 
8
%
 
3
%
Tubular
 
11
%
 
15
%
 
14
%

69

Table of Contents

Segment results for Flat-rolled
    
 
Average Realized Price Per Ton
 
Segment Income (Loss) from Operations(a)
 
(a) Amounts prior to 2011 have been restate to reflect a change in our segment allocation methodology for postretirement benefit expenses as disclosed in Note 3 to the Consolidated Financial Statements.

The Flat-rolled segment had income of $105 million for the year ended December 31, 2013 compared to income of $400 million for the year ended December 31, 2012. The decrease in Flat-rolled results for 2013 compared to 2012 resulted mainly from a decrease in average realized prices (approximately $405 million), decreased shipping volumes (approximately $105 million), increased energy costs, primarily due to higher natural gas costs (approximately $95 million), lower steel substrate sales to our Tubular segment (approximately $90 million), lower income from our joint ventures (approximately $70 million), idle facility costs associated with Lake Erie Works (approximately $45 million) and start-up costs associated with our Lake Erie Works (approximately $15 million). These changes were partially offset by lower raw material costs (approximately $385 million), decreased repairs and maintenance and other operating costs (approximately $100 million) and lower costs for employee profit sharing (approximately $45 million).

The Flat-rolled segment had income of $400 million for the year ended December 31, 2012 compared to income of $469 million for the year ended December 31, 2011. The decrease in Flat-rolled results for 2012 compared to 2011 resulted mainly from a decrease in average realized prices (approximately $150 million), unfavorable changes from steel substrate sales to our Tubular segment (approximately $65 million), increased facility repairs and maintenance and other operating costs (approximately $70 million) and higher costs for employee profit sharing (approximately $25 million). These decreases were partially offset by reduced energy costs, primarily due to lower natural gas costs (approximately $180 million) and an increase in shipment volumes (approximately $60 million).

70

Table of Contents


Segment results for ÁñÁ«ÊÓƵE
(Includes the results of ÁñÁ«ÊÓƵS through the disposition date of January 31, 2012)


The ÁñÁ«ÊÓƵE segment had income of $28 million for the year ended December 31, 2013 compared to income of $34 million for the year ended December 31, 2012. The decrease in ÁñÁ«ÊÓƵE results in 2013 compared to 2012 was primarily due to lower average realized prices (approximately $210 million) and increased repairs and maintenance and other operating costs (approximately $35 million), partially offset by decreased raw material costs (approximately $180 million), the weakening of the U.S. dollar versus the euro in 2013 compared to 2012 (approximately $20 million), the elimination of operating losses associated with our former Serbian operations subsequent to January 31, 2012 (which were approximately $20 million) and increased shipping volumes (approximately $20 million).

The ÁñÁ«ÊÓƵE segment had income of $34 million for the year ended December 31, 2012 compared to a loss of $162 million for the year ended December 31, 2011. The improvement in ÁñÁ«ÊÓƵE results in 2012 compared to 2011 was primarily due to lower raw materials costs (approximately $335 million), the elimination of operating losses subsequent to January 31, 2012 associated with our former Serbian operations (approximately $195 million), decreased facility repairs and maintenance and other operating costs (approximately $5 million) and increased shipment volumes (approximately $5 million). These improvements were partially offset by a decrease in average realized euro-based prices for ÁñÁ«ÊÓƵK (approximately $250 million), the strengthening of the U.S. dollar versus the euro in 2012 compared to 2011 (approximately $70 million) and increased energy costs primarily due to increased electricity costs (approximately $25 million).


71

Table of Contents

On January 31, 2012, U. S. Steel sold ÁñÁ«ÊÓƵS and subsequent to this sale, the ÁñÁ«ÊÓƵE segment includes only ÁñÁ«ÊÓƵK results. In order to provide a better understanding of the impact on ÁñÁ«ÊÓƵE segment results of the sale of ÁñÁ«ÊÓƵS, we include certain non-GAAP financial measures to show ÁñÁ«ÊÓƵK 2012 and 2011 results included in the ÁñÁ«ÊÓƵE segment. ÁñÁ«ÊÓƵE year ended December 31, 2012 and 2011 results included the following for ÁñÁ«ÊÓƵK:

 
 
Year ended December 31,
(Dollars in millions except average realized price amounts)
 
2012
 
2011
ÁñÁ«ÊÓƵK results
 
 
 
 
Income from operations
 
$
51

 
$
44

Shipments(a)
 
3,743

 
3,690

Raw steel production(a)
 
4,434

 
4,201

Raw steel capability utilization
 
88
%
 
84
%
Average realized price ($/net ton)
 
$
743

 
$
862

(a)
Thousands of net tons


72

Table of Contents

Segment results for Tubular

(a) Amounts prior to 2011 have been restate to reflect a change in our segment allocation methodology for postretirement benefit expenses as disclosed in Note 3 to the Consolidated Financial Statements.

The Tubular segment had income of $190 million for the year ended December 31, 2013 compared to income of $366 million for the year ended December 31, 2012. The decrease in Tubular results in 2013 as compared to 2012 resulted mainly from decreased average realized prices (approximately $240 million) and a decrease in shipping volumes (approximately $35 million). These decreases were partially offset by lower substrate costs (approximately $90 million), lower costs for employee profit sharing (approximately $5 million), and decreased repairs and maintenance and other operating costs (approximately $5 million).

The Tubular segment had income of $366 million for the year ended December 31, 2012 compared to income of $316 million for the year ended December 31, 2011. The improvement in Tubular results in 2012 as compared to 2011 resulted mainly from an increase in average realized prices (approximately $100 million), lower substrate costs primarily supplied by the Flat-rolled segment (approximately $65 million), and an increase of 74 thousand tons in shipments (approximately $45 million). These improvements were partially offset by increased facility repairs and maintenance and other operating costs (approximately $155 million) and higher costs for employee profit sharing (approximately $5 million).

Results for Other Businesses

Other Businesses had income of $77 million, $55 million and $46 million for 2013, 2012 and 2011, respectively. The increase from 2012 to 2013 includes a gain of approximately $30 million from a real estate sale.


73

Table of Contents

Items not allocated to segments:

The decrease in postretirement benefit expense in 2013 as compared to 2012 and 2012 as compared to 2011 resulted from lower pension expense due to the natural maturation of the pension plans and lower retiree medical expense caused by a number of Medicare program changes.

We recorded a non-cash impairment of goodwill charge of approximately $1.8 billion related to the full write-off of goodwill related to our Flat-rolled and Texas Operations reporting units during 2013.

We recorded non-cash restructuring and other charges of $248 million during 2013 related primarily to accelerated depreciation and severance charges as a result of the shut down of the iron and steelmaking facilities at Hamilton Works.

We recorded a $32 million environmental remediation charge in 2013 in connection with the definition of the expanded scope of the St. Louis Estuary and Upland project. We recorded an $18 million environmental remediation charge in 2011 as a component of the Gary Works RCRA corrective action program was defined.

We recorded a non-cash charge during 2013 of $16 million to write-off our investment in United Spiral Pipe, LLC.

We recorded a $23 million and $15 million pretax favorable settlement in 2013 and 2012, respectively, related to a supplier contract dispute settlement.

We recorded a $310 million pretax net loss on the sale of assets in 2012 which consisted of a pretax loss of $399 million related to the sale of ÁñÁ«ÊÓƵS and a pretax gain of $89 million related to the sale of a majority of the operating assets of the Birmingham Southern Railroad.

The 2012 Labor Agreements provided for lump sum payments of $2,000 to each covered active USW member. These labor agreement lump sum payments resulted in a pretax charge of $35 million in 2012.

We recorded a pretax gain of $19 million related to property tax settlements that occurred in 2012. This was reflected as a reduction to our cost of sales.

Net Interest and Other Financial Costs

 
 
Year Ended December 31,
(Dollars in millions)
 
2013
 
2012
 
2011
Interest income
 
$
(3
)
 
$
(7
)
 
$
(6
)
Interest expense
 
266

 
214

 
190

Other financial costs
 
69

 
34

 
54

Net interest and other financial costs
 
$
332

 
$
241

 
$
238


The increase in net interest and other financial costs from 2012 to 2013 is primarily due to an increase in interest expense associated with our $275 million 6.875% Senior Notes due 2021 and our $316 million 2.75% Senior Convertible Notes due 2019, which were issued to refinance $542 million of our 4% Senior Convertible Notes due in 2014, a charge of $22 million related to a guarantee of an unconsolidated equity investment and a decrease in capitalized interest.

Net interest and other financial costs for 2012 was comparable to 2011 as an $18 million redemption premium associated with the April 2012 redemption of all of our $300 million 5.65% Senior Notes due June 1, 2013 was offset by reduced net foreign currency losses resulting from the accounting remeasurement effects on a U.S. dollar-denominated intercompany loan from a U.S. subsidiary to a European entity. Effective January 1, 2012, the functional currency of the European entity changed from the euro to the U.S. dollar because of significant changes in economic facts and circumstances, including the sale of ÁñÁ«ÊÓƵS. This change in functional currency has been applied on a prospective basis since January 1, 2012.


74

Table of Contents

For additional information on U. S. Steel’s foreign currency exchange activity see Note 13 to the Consolidated Financial Statements and “Item 7A. Quantitative and Qualitative Disclosures about Market Risk – Foreign Currency Exchange Rate Risk.”

Income Taxes

The income tax benefit for the year ended December 31, 2013 was $560 million compared to an income tax provision of $131 million in 2012 and $80 million in 2011. The tax benefit (provision) does not reflect any tax benefit for pretax losses in Canada and Serbia (ÁñÁ«ÊÓƵS was sold on January 31, 2012), which are jurisdictions where we have, or had, recorded a full valuation allowance on deferred tax assets, and also does not reflect any tax provision or benefit for certain foreign currency remeasurement gains and losses that are not recognized in any tax jurisdiction. (See Item 7A. Quantitative and Qualitative Disclosures about Market Risk – Foreign Currency Exchange Rate Risk for further details.)

U. S. Steel will make an election effective December 31, 2013 to liquidate for U.S. income tax purposes a foreign subsidiary that holds most of our international operations. The election will allow us to take a worthless stock loss and bad debt deduction in our 2013 U.S. income tax return for the excess of our investment in the subsidiary over the value of its assets. As a result, the Company recorded a tax benefit of $392 million in the fourth quarter, which includes a $22 million tax benefit which offsets taxes in the same amount charged against other comprehensive income for current year translation adjustments involving ÁñÁ«ÊÓƵK. The tax benefit includes a $66 million reduction in U.S. income taxes payable for 2013, as well as a refund of $176 million expected in 2014 from the carryback of 2013 losses to prior years. The remaining $150 million benefit is expected to offset U.S. income taxes in future years. The election to liquidate the foreign subsidiary for U.S. income tax purposes will result in ÁñÁ«ÊÓƵK's income being subject to U.S. income taxes, less any applicable credit for Slovak income taxes paid, effective December 31, 2013.

For 2013, there was essentially no tax benefit recorded on the $1.8 billion goodwill impairment charge. Included in the 2013 tax benefit is a favorable catch-up adjustment in the fourth quarter of $33 million primarily related to a decrease in forecasted income as well as a discrete tax benefit of $13 million to adjust state deferred taxes. In addition, the 2013 adjustment of prior years' federal income taxes included a charge of approximately $19 million recorded in the fourth quarter to adjust deferred taxes for prior years' differences between the financial statement carrying amounts of assets and liabilities and their tax bases for U.S. income tax purposes. For 2012, no significant tax benefit was recorded on the $399 million loss on the sale of ÁñÁ«ÊÓƵS. Also included in the 2012 income tax provision is a tax benefit of $20 million relating to adjustments to tax reserves related to the conclusion of certain audits as well as a tax benefit of $26 million to adjust our estimated 2011 federal tax liability to our actual tax liability reflected in our tax return as filed.

The net domestic deferred tax asset was $88 million at December 31, 2013 compared to a net domestic deferred tax asset of $538 million at December 31, 2012. The decrease in the net domestic deferred tax asset from 2012 to 2013 was primarily due to the remeasurement of plans for pensions and other benefits (see Note 16 to the Consolidated Financial Statements). A substantial amount of U. S. Steel’s domestic deferred tax assets relates to employee benefits that will become deductible for tax purposes over an extended period of time as cash contributions are made to employee benefit plans and retiree benefits are paid in the future. We continue to believe it is more likely than not that the net domestic deferred tax asset will be realized.

At December 31, 2013, the net foreign deferred tax asset was $59 million, net of established valuation allowances of $1,028 million. At December 31, 2012, the net foreign deferred tax asset was $57 million, net of established valuation allowances of $1,099 million. The net foreign deferred tax asset will fluctuate as the value of the U.S. dollar changes with respect to the euro and the Canadian dollar. A full valuation allowance was recorded for the net Canadian deferred tax asset primarily due to cumulative losses in Canada. If evidence changes and it becomes more likely than not that the Company will realize the net Canadian deferred tax asset, the valuation allowance would be partially or fully reversed. Any reversal of this amount would result in a decrease to tax expense.

For further information on income taxes see Note 8 to the Consolidated Financial Statements.

Net loss attributable to U. S. Steel

Net loss attributable to U. S. Steel in 2013 was $1,672 million compared to $124 million and $53 million in 2012 and 2011, respectively. The changes primarily reflected the factors discussed above.




75

Table of Contents

Financial Condition, Cash Flows and Liquidity

Financial Condition

Accounts receivable decreased by $105 million from December 31, 2012 as shipment volumes decreased in the fourth quarter of 2013 compared to the fourth quarter of 2012.

Inventories increased by $185 million from December 31, 2012 primarily due to an inventory build during the fourth quarter of 2013 as a result of planned maintenance projects and to position us to take advantage of future business opportunities as market improvements are expected.

Income tax receivable increased by $175 million from December 31, 2012 primarily due to a federal income tax refund of $176 million that we expect to receive in 2014 as a result of carrying back our 2013 net operating loss to prior years.

Property, plant and equipment decreased by $486 million from December 31, 2012 primarily as a result of the shut down of the iron and steelmaking facilities at Hamilton Works and depreciation in excess of capital expenditures.

Goodwill decreased by $1,818 million from year-end 2012 primarily due to an impairment charge recognized for our Flat-Rolled and Texas Operations reporting units in 2013. See further disclosure included in the Critical Accounting Estimates section.

Total deferred income tax benefits decreased by $3 million from December 31, 2012 primarily due to the annual valuation effects of employee related benefits mostly offset by the impact of the worthless stock loss and bad debt deduction. See Notes 8 and 16 to the Consolidated Financial Statements.

Other noncurrent assets decreased by $96 million from year-end 2012 primarily due to a reduction in restricted cash from the transfer of cash collateralized letters of credit to our Receivables Purchase Agreement and the use of proceeds from our environmental revenue bonds for capital expenditures.

Short-term debt and current maturities of long-term debt increased by $321 million from year-end 2012 primarily due to the reclassification of $322 million of 4.00% Senior Notes due May 2014 from long-term debt.

Long-term debt, less unamortized discount decreased by $320 million primarily due to the reclassification of $322 million of 4.00% Senior Convertible Notes due May 2014 from long-term debt to current maturities of long-term debt.

Employee benefits decreased by $2,352 million from December 31, 2012 primarily due to the increase in the discount rate, a strong return on plan assets and favorable claims cost experience, slightly offset by improvements in mortality for our formerly represented retirees.

Deferred income tax liabilities in 2013 resulted primarily from the annual valuation effects of employee related benefits and the impact of the worthless stock loss and bad debt deduction.

Cash Flows

Net cash provided by operating activities was $414 million in 2013 compared to $1,135 million in 2012 and $168 million in 2011. The decrease is primarily due to lower financial results, excluding a goodwill impairment charge of $1,806 million recognized in 2013 and a net loss of $296 million on the sale of assets in 2012 and changes in working capital period over period, partially offset by lower employee benefit payments as described below. Changes in working capital can vary significantly depending on factors such as the timing of inventory production and purchases, which is affected by the length of our business cycles as well as our captive raw materials position, customer payments of accounts receivable and payments to vendors in the regular course of business. Our key working capital components include accounts receivable and inventory.


76

Table of Contents

The accounts receivable and inventory turnover ratios for the years ended December 31, 2013 and 2012 are as follows:

 
 
Year Ended December 31,
 
 
2013
 
2012
Accounts Receivable Turnover
 
8.6

 
9.3

Inventory Turnover
 
6.2

 
6.7


Net cash provided by operating activities for 2013, 2012 and 2011 reflects employee benefits payments as shown in the following table.

Employee Benefits Payments

 
 
Year Ended December 31,
(Dollars in millions)
 
2013
 
2012
 
2011
Voluntary contributions to main defined benefit pension plan(a)
 
$
145

 
$
140

 
$
140

Required contributions to other defined benefit pension plans
 
82

 
94

 
90

Other employee benefits payments not funded by trusts
 
137

 
303

 
309

Contributions to trusts for retiree health care and life insurance(b)
 
10

 
76

 

Payments to a multiemployer pension plan
 
74

 
69

 
63

Pension related payments not funded by trusts(c)
 
30

 
25

 
24

Reductions in cash flows from operating activities
 
$
478

 
$
707

 
$
626

(a)
Includes a contribution in 2013 related to the payment of Pension Benefit Guarantee Corporation (PBGC) fees.
(b)
Includes $75 million of contributions in 2012 to a restricted account within our trust for represented retiree health care and life insurance benefits as required by collective bargaining agreements.
(c)
Includes a one time payment of $5 million in 2012 related to fees paid by the Company on behalf of the main defined benefit pension plan.


77

Table of Contents

Capital expenditures in 2013 were $477 million compared to $723 million in 2012 and $848 million in 2011.


2013 Capital Spending
Flat-rolled capital expenditures were $349 million and included spending for construction of carbon alloy facilities (coke substitute), a major rehabilitation of the No. 8 Blast Furnace at Gary Works, ongoing implementation of an enterprise resource planning (ERP) system and various other infrastructure and environmental projects. Tubular capital expenditures of $69 million related to an upgrade to the Lorain No. 4 Seamless Hot Mill, infrastructure, environmental and strategic capital projects. ÁñÁ«ÊÓƵE capital expenditures of $40 million consisted of spending for infrastructure and environmental projects.

2012 Capital Spending
Flat-rolled capital expenditures were $625 million and included spending for construction of carbon alloy facilities (coke substitute) at Gary Works, construction of a technologically and environmentally advanced coke battery at the Mon Valley Works’ Clairton Plant, ongoing implementation of an enterprise resource planning (ERP) system and various other infrastructure and environmental projects. Tubular capital expenditures of $42 million primarily related to an upgrade to the Lorain No. 4 Seamless Hot Mill, infrastructure and environmental capital projects. ÁñÁ«ÊÓƵE capital expenditures of $38 million consisted of spending for infrastructure and environmental projects.

2011 Capital Spending
Flat-rolled capital expenditures of $616 million included spending for construction of carbon alloy facilities at Gary Works, construction of a technologically and environmentally advanced coke battery at the Mon Valley Works’ Clairton Plant, ongoing implementation of an ERP system and various other infrastructure, environmental and strategic projects. ÁñÁ«ÊÓƵE capital expenditures of $109 million included spending for environmental projects and for blast furnace coal injection projects. Tubular capital expenditures of $104 million primarily related to construction of a heat treat and finishing facility at our Lorain Tubular Operations in Ohio.

U. S. Steel’s contract commitments to acquire property, plant and equipment at December 31, 2013, totaled $151 million.

Capital expenditures for 2014 are expected to total approximately $650 million and remain focused largely on strategic, infrastructure and environmental projects. In recent years, we have completed or neared completion on several key projects of strategic importance. We have made significant progress to improve our coke self-sufficiency and reduce our reliance on purchased coke for the steelmaking process through the application of advanced technologies, upgrades to our existing coke facilities and increased use of natural gas and pulverized coal in our operations. We have completed the construction of a technologically and environmentally advanced battery at the Mon Valley Works’ Clairton Plant with a capacity of 960,000 tons per year. Initial start-up of the battery began in November 2012 and the battery has reached full production capacity. We have been constructing a two module carbon alloy facility at Gary Works, which utilizes an environmentally compliant, energy efficient and flexible production technology to produce a coke substitute product. The facility has a projected capacity of 500,000 tons per year when both modules are completed. Construction of the first module is complete, and we continue to focus on the optimization and reliability of operations of that module. We have temporarily suspended construction activities on the second module at this time based on current economic conditions, our coke requirements in North America and additional work on the first module.

78

Table of Contents

In an effort to increase our participation in the automotive market as vehicle emission and safety requirements become increasingly stringent, PRO-TEC Coating Company, our joint venture in Ohio with Kobe Steel, Ltd., has a new automotive continuous annealing line (CAL) that began operations during the first quarter of 2013 and was financed by the joint venture.
We are continuing our efforts to implement an ERP system to replace our existing information technology systems, which will enable us to operate more efficiently. The completion of the ERP project is expected to provide further opportunities to streamline, standardize and centralize business processes in order to maximize cost effectiveness, efficiency and control across our global operations. We are also currently developing additional projects within our Tubular segment, such as facility enhancements and additional premium connections that will further improve our ability to support our Tubular customers’ evolving needs.
Over the longer term, we are considering business strategies to leverage our significant iron ore position in the United States and to exploit opportunities related to the availability of reasonably priced natural gas as an alternative to coke in the iron reduction process to improve our cost competitiveness, while reducing our dependence on coal and coke. We are considering an expansion of our iron ore pellet operations at our Keewatin, MN (Keetac) facility which would increase our production capability by approximately 3.6 million tons thereby increasing our iron ore self-sufficiency. The total cost of this project as currently conceived is broadly estimated to be approximately $820 million. Final permitting for the expansion was completed in December 2011. An extension to the construction air permit was granted during November 2013 that extends the permit until September 2014. We are examining alternative iron and steelmaking technologies such as gas-based, direct-reduced iron (DRI) and electric arc furnace (EAF) steelmaking. We are currently in the permitting process for the installation of an EAF at our Fairfield Works in Alabama. We submitted air and water permit applications to the Jefferson County Department of Health and the Alabama Department of Environmental Management, respectively, in February 2014.
The DRI process requires iron pellets with a lower silica content than blast furnace pellets. We have verified that our iron ore reserves are suitable for direct reduced (DR) grade pellet production and are examining the capital and engineering design process requirements to produce DR grade pellets at our Minntac operations for use internally by the Company if we were to construct a DRI facility or for sale to external third parties with DRI facilities.
Our capital investments in the future may reflect such strategies, although we expect that iron and steel-making through the blast furnace and basic oxygen furnace manufacturing processes will remain our primary processing technology for the long term.

The foregoing statements regarding expected capital expenditures, capital projects, emissions reductions and expected benefits from the implementation of the ERP project are forward-looking statements. Factors that may affect our capital spending and the associated projects include: (i) levels of cash flow from operations; (ii) changes in tax laws; (iii) general economic conditions; (iv) steel industry conditions; (v) cost and availability of capital; (vi) receipt of necessary permits; (vii) unforeseen hazards such as contractor performance, material shortages, weather conditions, explosions or fires; (viii) our ability to implement these projects; and (ix) the requirements of applicable laws and regulations. There is also a risk that the completed projects will not produce at the expected levels and within the costs currently projected. Predictions regarding benefits resulting from the implementation of the ERP project are subject to uncertainties. Actual results could differ materially from those expressed in these forward-looking statements.

Disposal of assets in 2012 primarily reflects proceeds from the sale of the majority of the operating assets of Birmingham Southern Railroad Company and the Port Birmingham Terminal. Disposal of assets in 2011 primarily reflects cash proceeds of approximately $22 million from transactions to sell and swap a portion of the emissions allowances at ÁñÁ«ÊÓƵK as well as various other transactions, none of which were individually material.

Restricted cash in 2013 reflects a reduction in the use of cash collateralized letters of credit, which were replaced with surety bonds or transferred to our Receivables Purchase Agreement, as well as the use of proceeds from our environmental revenue bonds due 2042. These proceeds are restricted for certain environmental capital projects at our Gary Works, our Clairton Plant and Granite City Works and become unrestricted as capital expenditures for these projects are made. At December 31, 2013, $43 million of this restricted cash remains. Restricted cash in 2012 primarily reflects the issuance of $94 million of 2042 Environmental Revenue Bonds, the proceeds of which were placed in escrow and restricted for certain capital projects at Gary Works, our Clairton Plant and Granite City Works. The proceeds become unrestricted as capital expenditures for these projects are made. Restricted cash in 2011 primarily relates to the receipt and use of the proceeds received from the issuance of $70 million of Recovery Zone Facility Bonds in 2010. The proceeds of which were placed in escrow and restricted for the heat treat and finishing facilities capital project at

79

Table of Contents

our Tubular operations in Lorain, Ohio. The proceeds became unrestricted as capital expenditures for this project were made. This project was completed in 2011.

Borrowings against revolving credit facilities in 2012 and 2011 reflect amounts drawn under ÁñÁ«ÊÓƵK’s unsecured revolving credit facilities.

Repayments of revolving credit facilities in 2012 and 2011 reflect ÁñÁ«ÊÓƵK’s repayment of the outstanding borrowings under its unsecured revolving credit facilities.

Receivables Purchase Agreement (payments) proceeds in 2012 and 2011 reflect activity under the Receivables Purchase Agreement.

Issuance of long-term debt, net of financing costs in 2013 reflects the issuance of $316 million of 2.75% Senior Convertible Notes due 2019 and $275 million of 6.875% Senior Notes due 2021. U. S. Steel received net proceeds of $575 million after fees related to the underwriting discounts and third party expenses. Issuance of long-term debt, net of financing costs in 2012 reflects the issuance of $400 million of 7.50% Senior Notes due 2022 and the issuance of $94 million 5.75% 2042 Environmental Revenue Bonds (ERBs). U. S. Steel received net proceeds of $392 million and $93 million, respectively after related discounts and other fees. Issuance of long-term debt, net of financing costs in 2011 reflects the issuance of $195 million of ERBs maturing from 2015 to 2029. See “Liquidity.”

Repayment of long-term debt in 2013 reflects the repurchase of $542 million aggregate principal amount of our 4.00% Senior Convertible Notes. Repayment of long-term debt in 2012 reflects the redemption of our $300 million 5.65% Senior Notes due 2013. Repayment of long-term debt in 2011 primarily reflects the refunding of $196 million of ERBs. See “Liquidity.”

For all four quarters in 2013, 2012 and 2011, dividends paid per share of U. S. Steel common stock was $0.05.

Liquidity

The following table summarizes U. S. Steel’s liquidity as of December 31, 2013:

(Dollars in millions)
 
Cash and cash equivalents
$
604

Amount available under $875 Million Credit Facility
788

Amount available under Receivables Purchase Agreement
572

Amounts available under ÁñÁ«ÊÓƵK credit facilities
314

Total estimated liquidity
$
2,278



We ended 2013 with $604 million of cash and cash equivalents and total liquidity of $2.3 billion. As of December 31, 2013, $322 million of the total cash and cash equivalents was held by our foreign subsidiaries. Substantially all of the

80

Table of Contents

liquidity attributable to our foreign subsidiaries can be accessed without the imposition of income taxes as a result of the election effective December 31, 2013 to liquidate for U.S. income tax purposes a foreign subsidiary that holds most of our international operations. See Note 8 to the Consolidated Financial Statements. Additionally, as part of our Carnegie Way initiative to remain competitive and drive world class growth we are implementing extended vendor payment terms to be better aligned with other large industrial companies and our peers in the metals and mining sector.
On March 26, 2013, U. S. Steel issued $316 million of 2.75% Convertible Senior Notes due 2019 and $275 million of 6.875% Senior Notes due 2021. U. S. Steel received net proceeds of $576 million from the issuances. The net proceeds were used to repurchase $542 million aggregate principal amount of our 4.00% Senior Convertible Notes due 2014.

On March 15, 2012, U. S. Steel issued $400 million of 7.50% Senior Notes due March 15, 2022 (2022 Senior Notes). U. S. Steel received net proceeds from the offering of $392 million. The majority of the net proceeds from the issuance of the 2022 Senior Notes was used to redeem the 2013 Senior Notes, which were redeemed in April of 2012.

On August 17, 2012, U. S. Steel entered into loan agreements with several local authorities in connection with the issuance and sale of $94 million of Environmental Revenue Bonds due August 1, 2042. The proceeds from the sale, reflected as restricted cash in other noncurrent assets, were loaned to U. S. Steel to fund certain capital projects at our Gary Works, Clairton Plant and Granite City Works. The proceeds become unrestricted as capital expenditures for these projects are made. At December 31, 2013, $43 million of this restricted cash remained. The interest rate on the loans is 5.75 percent and interest is payable semi-annually on February 1st and August 1st of each year.

As of December 31, 2013, there were no amounts drawn under our $875 million credit facility agreement (Amended Credit Agreement) and inventory values calculated in accordance with the Amended Credit Agreement supported the full $875 million of the facility. Under the Amended Credit Agreement, U. S. Steel must maintain a fixed charge coverage ratio (as further defined in the Amended Credit Agreement) of at least 1.00 to 1.00 for the most recent four consecutive quarters when availability under the Amended Credit Agreement is less than the greater of 10% of the total aggregate commitments and $87.5 million. Based on the most recent four quarters as of December 31, 2013, we would not meet this covenant. If the value of inventory does not support the full amount of the facility or we remain unable to meet this covenant in the future, the full amount of this facility would not be available to the Company.

In addition, beginning on February 13, 2014 and extending until the repayment or conversion of the $322 million of 4.00% Senior Convertible Notes, we must maintain minimum liquidity (as further defined in the Amended Credit Agreement) of at least $175 million. The minimum liquidity must include at least $145 million of availability under the Amended Credit Agreement.

As of December 31, 2013, U. S. Steel has a Receivables Purchase Agreement (RPA) that provides liquidity and letters of credit depending upon the number of eligible domestic receivables generated by U. S. Steel. Domestic trade accounts receivables are sold, on a daily basis, without recourse, to U. S. Steel Receivables, LLC (ÁñÁ«ÊÓƵR), a consolidated wholly owned special purpose entity used only for the securitization program. As U. S. Steel accesses this facility, ÁñÁ«ÊÓƵR sells senior undivided interests in the receivables to a third-party and a third-party commercial paper conduit for cash, while maintaining a subordinated undivided interest in a portion of the receivables. The third-parties issue commercial paper to finance the purchase of their interest in the receivables and if any of them are unable to fund such purchases, two banks are committed to do so. U. S. Steel has agreed to continue servicing the sold receivables at market rates.

The RPA may be terminated on the occurrence and failure to cure certain events, including, among others, failure by U. S. Steel to make payments under our material debt obligations and any failure to maintain certain ratios related to the collectability of the receivables. The maximum amount of receivables eligible for sale is $625 million and the facility expires on July 18, 2014. At both December 31, 2013 and 2012, eligible accounts receivable supported $625 million of availability under the RPA. There were no receivables sold to third-parties under this facility at both December 31, 2013 and December 31, 2012. The subordinated retained interest at both December 31, 2013 and December 31, 2012 was $625 million with availability at December 31, 2013 of $572 million due to approximately $53 million of letters of credit outstanding.

At both December 31, 2013 and 2012, ÁñÁ«ÊÓƵK had no borrowings under its €200 million (approximately $276 million and $264 million, respectively) unsecured revolving credit facility.

On July 15, 2013, ÁñÁ«ÊÓƵK entered into a €200 million revolving credit facility agreement (Credit Agreement) that replaced ÁñÁ«ÊÓƵK's €200 million credit facility that was scheduled to expire in August 2013. The Credit Agreement contains certain

81

Table of Contents

ÁñÁ«ÊÓƵK financial covenants (as further defined in the Credit Agreement) as well as other customary terms and conditions. The Credit Agreement expires in July 2016.
ÁñÁ«ÊÓƵK has a €20 million (approximately $27 million at December 31, 2013) unsecured revolving credit facility that expires in December 2015.
On December 6, 2013, ÁñÁ«ÊÓƵK entered into a €10 million (approximately $14 million at December 31, 2013) unsecured credit facility that expires in December 2016.
At December 31, 2013, ÁñÁ«ÊÓƵK had no borrowings under its €20 million and €10 million unsecured credit facilities (collectively approximately $41 million) and the availability was approximately $38 million due to approximately $3 million of customs and other guarantees outstanding. At December 31, 2012, ÁñÁ«ÊÓƵK had no borrowings under its €20 million credit facility (which approximated $26 million) and the availability was approximately $24 million due to approximately $2 million of customs and other guarantees outstanding.

We may from time to time seek to retire or purchase our outstanding debt in open market purchases, privately negotiated transactions, exchange transactions or otherwise. Such purchases or exchanges, if any, will depend on prevailing market conditions, our liquidity requirements, contractual restrictions and other factors and may be commenced or suspended at any time. The amounts involved may be material.

We use surety bonds, trusts and letters of credit to provide financial assurance for certain transactions and business activities. The use of some forms of financial assurance and collateral have a negative impact on liquidity. U. S. Steel has committed $166 million of liquidity sources for financial assurance purposes as of December 31, 2013. Increases in these commitments which use collateral are reflected in restricted cash on the Consolidated Statement of Cash Flows.

At December 31, 2013, in the event of a change in control of U. S. Steel, the following may occur: (a) debt obligations totaling $3,212 million as of December 31, 2013 (including the Senior Notes and Senior Convertible Notes) may be declared immediately due and payable; (b) the Amended Credit Agreement, the RPA and ÁñÁ«ÊÓƵK’s €200 million revolving credit agreement may be terminated and any amounts outstanding declared immediately due and payable; and (c) U. S. Steel may be required to either repurchase the leased Fairfield slab caster for $39 million or provide a cash collateralized letter of credit to secure the remaining obligation.

U. S. Steel is the lessee of a slab caster at Fairfield Works in Alabama. In December 2012, U. S. Steel exercised an option to renew the lease for a nine year term and purchase the facility at the expiration of the renewal period in June 2022.

The maximum guarantees of the indebtedness of unconsolidated entities of U. S. Steel totaled $29 million (which includes the recorded liability of $22 million noted below) at December 31, 2013. If any default related to the guaranteed indebtedness occurs, U. S. Steel has access to its interest in the assets of the investees to reduce its potential losses under the guarantees.
During 2013, U. S. Steel recorded a pretax charge of $22 million to net interest and other financial costs to record a liability related to a guarantee of an unconsolidated equity investment for which payment by U. S. Steel is probable. The $22 million is the maximum amount U. S. Steel would be obligated to pay as the guarantor and represents the fair value of the obligation at December 31, 2013.

Additionally, in 2012, we made a $75 million contribution to a restricted account within our trust for represented retiree health care and life insurance benefits as required by collective bargaining agreements. The $75 million contribution to this restricted account that was due in December 2013 has been deferred until December 2016. U. S. Steel is also required to make $75 million contributions to that trust account in 2014 and 2015.

In conjunction with the acquisition of Stelco, now ÁñÁ«ÊÓƵC, U. S. Steel assumed the pension plan funding agreement (Pension Agreement) that Stelco had entered into with the Superintendent of Financial Services of Ontario (the Province) on March 31, 2006 that covers ÁñÁ«ÊÓƵC’s four main pension plans. The Pension Agreement requires minimum contributions of C$70 million (approximately C$67 million) per year in 2011 through 2015 plus additional annual contributions for benefit improvements, primarily related to union retiree indexing provisions. With the Hamilton Works and Lake Erie Works collective bargaining agreement settlements in 2011 and 2010, respectively, cost of living provisions are no longer provided through the pension plan covering former represented employees. The Pension Agreement remains in effect with its defined annual contributions as noted above until the earlier of full solvency funding

82

Table of Contents

for the four main plans or until December 31, 2015, when minimum funding requirements for the plans resume under the provincial pension legislation.

In its acquisition of Stelco on October 31, 2007, U. S. Steel assumed liability for a note issued to the Province of Ontario (Province Note). The face amount of the Province Note is C$150 million (approximately $141 million and $151 million at December 31, 2013 and 2012) and is payable on December 31, 2015. The Province Note is unsecured and is subject to a 75 percent discount if the solvency deficiencies in the four main ÁñÁ«ÊÓƵC pension plans (see Note 14 to the Consolidated Financial Statements) are eliminated on or before the maturity date.

83

Table of Contents

The following table summarizes U. S. Steel’s contractual obligations at December 31, 2013, and the effect such obligations are expected to have on our liquidity and cash flows in future periods.

(Dollars in millions)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Payments Due by Period
 
Contractual Obligations
 
Total
 
2014
 
2015
through
2016
 
2017
through
2018
 
Beyond
2018
 
Long-term debt (including interest) and capital leases(a)
 
$
6,046

 
$
568

 
$
715

 
$
1,359

 
$
3,404

 
Operating leases(b)
 
300

 
76

 
134

 
59

 
31

 
Contractual purchase commitments(c)
 
8,518

 
5,546

 
906

 
623

 
1,443

 
Capital commitments(d)
 
151

 
120

 
31

 

 

 
Environmental commitments(d)
 
233

 
17

 

 

 
216

(e) 
Steelworkers Pension Trust
 
430

(f) 
80

 
170

(f) 
180

(f) 

(f) 
Pensions(g)
 
950

 
85

 
400

 
375

 
90

 
Other benefits
 
1,515

(h) 
310

 
730

 
475

 

(h) 
Unrecognized tax positions
 
63

 

 

 

 
63

(e) 
Total contractual obligations
 
$
18,206

 
$
6,802

 
$
3,086

 
$
3,071

 
$
5,247

 
(a)
See Note 14 to the Consolidated Financial Statements.
(b)
See Note 22 to the Consolidated Financial Statements. Amounts exclude subleases.
(c)
Reflects contractual purchase commitments under purchase orders and “take or pay” arrangements. “Take or pay” arrangements are primarily for purchases of gases and certain energy and utility services. Additionally, includes coke and steam purchase commitments related to a coke supply agreement with Gateway Energy & Coke Company LLC (See Note 24 to the Consolidated Financial Statements).
(d)
See Note 24 to the Consolidated Financial Statements.
(e)
Timing of potential cash flows is not reasonably determinable.
(f)
While it is difficult to make a prediction of cash requirements beyond the term of the 2012 Labor Agreements with the USW, which expire on September 1, 2015, projected amounts shown through 2018 assume that the current $2.65 contribution rate per hour will apply.
(g)
Amounts shown represent projected cash requirements for the ÁñÁ«ÊÓƵC pension plans, related to a mandated schedule of fixed minimum payments of C$70 million (approximately $67 million) per year for the four main ÁñÁ«ÊÓƵC pension plans that remains in effect until 2016. In 2016, minimum funding requirements under the Pension Benefits Act (PBA) will resume for the four main ÁñÁ«ÊÓƵC plans. The amounts shown for 2016, 2017, 2018 and beyond are estimates for the minimum owed by all ÁñÁ«ÊÓƵC plans under the PBA for the respective plan years. U.S. dollar equivalents of contributions are based on foreign exchange rates as of December 31, 2013. Projections for 2016, 2017, 2018 and beyond also include estimates of the minimum required contributions to the main domestic defined benefit pension plan which have been estimated assuming future asset performance consistent with our expected long-term earnings rate assumption and that the current low interest rate environment persists.
(h)
The amounts reflect corporate cash outlays expected for required contributions to benefit trusts and benefit payments expected to be paid from corporate trusts. Contributions include required amounts to the USW VEBA trust (See Note 16 to the Consolidated Financial Statements). The accuracy of this forecast of future cash flows depends on various factors such as actual asset returns, the asset trust mix, medical health care escalation rates and company decisions or restrictions related to our trusts for retiree healthcare and life insurance that impact the timing of the use of trust assets. Projected amounts do not reflect optional drawdowns from the USW VEBA trust if U. S. Steel decides to utilize certain options available under its agreements with the USW. Due to these factors, it is impossible to make a reliable prediction of cash requirements beyond five years and actual amounts experienced may differ significantly from those shown.

Contingent lease payments have been excluded from the above table. Contingent lease payments relate to operating lease agreements that include a floating rental charge, which is associated to a variable component. Future contingent lease payments are not determinable to any degree of certainty. U. S. Steel’s annual incurred contingent lease expense is disclosed in Note 22 to the Consolidated Financial Statements. Additionally, recorded liabilities related to deferred income taxes and other liabilities that may have an impact on liquidity and cash flow in future periods are excluded from the above table.

In November 2013, U. S. Steel’s Board of Directors (the Board) authorized voluntary contributions to U. S. Steel’s trusts for pensions and other benefits of up to $300 million through the end of 2015. U. S. Steel made voluntary contributions of $140 million to the main domestic defined benefit pension plan in 2013. U. S. Steel may make voluntary contributions of similar or greater amounts from the authorized funding in 2014 or later periods to the main defined benefit pension plan in the United States in order to mitigate potentially larger mandatory required contributions under the Pension Protection Act of 2006 in later years. In addition to the amounts included in the above table, U. S. Steel expects to make payments of $75 million to other pension plans not funded by trusts. The funded status of U. S. Steel’s pension plans is disclosed in Note 16 to the Consolidated Financial Statements.

84

Table of Contents


The following table summarizes U. S. Steel’s commercial commitments at December 31, 2013, and the effect such commitments could have on our liquidity and cash flows in future periods.

(Dollars in millions)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Scheduled Reductions by Period
 
Commercial Commitments
 
Total
 
2014
 
2015
through
2016
 
2017
through
2018
 
Beyond
2018
 
Standby letters of credit(a)
 
$
19

 
$
6

 
$
1

 
$

 
$
12

(b) 
Surety bonds(a)
 
66

 

 

 

 
66

(b) 
Funded Trusts(a)
 
28

 

 

 

 
28

(b) 
Total commercial commitments
 
$
113

 
$
6

 
$
1

 
$

 
$
106

 
(a)
Reflects a commitment or guarantee for which future cash outflow is not considered likely.
(b)
Timing of potential cash outflows is not determinable.

Our major cash requirements in 2014 are expected to be for capital expenditures, employee benefits, debt service and operating costs, including purchases of raw materials. We ended 2013 with $604 million of cash and cash equivalents and $2.3 billion of total liquidity. Available cash is left on deposit with financial institutions or invested in highly liquid securities with parties we believe to be creditworthy.

U. S. Steel management believes that U. S. Steel’s liquidity will be adequate to satisfy our obligations for the foreseeable future, including obligations to complete currently authorized capital spending programs. Future requirements for U. S. Steel’s business needs, including the funding of acquisitions and capital expenditures, scheduled debt maturities, contributions to employee benefit plans, and any amounts that may ultimately be paid in connection with contingencies, are expected to be financed by a combination of internally generated funds (including asset sales), proceeds from the sale of stock, borrowings, refinancings and other external financing sources.

Our opinion regarding liquidity is a forward-looking statement based upon currently available information. To the extent that operating cash flow is materially lower than recent levels or external financing sources are not available on terms competitive with those currently available, future liquidity may be adversely affected.

Off-Balance Sheet Arrangements

U. S. Steel has invested in several joint ventures that are reported as equity investments. Several of these investments involved a transfer of assets in exchange for an equity interest. U. S. Steel has supply arrangements with several of these joint ventures. In some cases, a portion of the labor force used by the investees is provided by U. S. Steel, the cost of which is reimbursed; however, failing reimbursement, U. S. Steel is ultimately responsible for the cost of these employees. The terms of these arrangements were a result of negotiations in arms-length transactions with the other joint venture participants, who are not affiliates of U. S. Steel.

U. S. Steel’s other off-balance sheet arrangements include guarantees, indemnifications, unconditional purchase obligations, surety bonds, trusts and letters of credit disclosed in Note 24 to the Consolidated Financial Statements as well as operating leases disclosed in Note 22 to the Consolidated Financial Statements.

Derivative Instruments

See “Item 7A. Quantitative and Qualitative Disclosures About Market Risk” for discussion of derivative instruments and associated market risk for U. S. Steel.

Environmental Matters, Litigation and Contingencies

Environmental Matters

U. S. Steel has incurred and will continue to incur substantial capital, operating and maintenance, and remediation expenditures as a result of environmental laws and regulations. In recent years, these expenditures have been mainly for process changes in order to meet Clean Air Act (CAA) obligations and similar obligations in Europe and Canada, although ongoing compliance costs have also been significant. To the extent that these expenditures, as with all costs, are not ultimately reflected in the prices of our products and services, operating results will be reduced. U. S. Steel

85

Table of Contents

believes that our major North American and many European integrated steel competitors are confronted by substantially similar conditions and thus does not believe that our relative position with regard to such competitors is materially affected by the impact of environmental laws and regulations. However, the costs and operating restrictions necessary for compliance with environmental laws and regulations may have an adverse effect on our competitive position with regard to domestic mini-mills, some foreign steel producers (particularly in developing economies such as China, Russia, Ukraine and India) and producers of materials which compete with steel, all of which may not be required to incur equivalent costs in their operations. The specific impact on each competitor may vary depending on a several things such as the age and location of its operating facilities and its production methods.
Some of U. S. Steel’s facilities were in operation before 1900. Although management believes that U. S. Steel’s environmental practices have either led the industry or at least been consistent with prevailing industry practices, hazardous materials may have been released at current or former operating sites or delivered to sites operated by third parties. This means U. S. Steel is responsible for remediation costs associated with the disposal of such materials and many of our competitors do not have similar historical liabilities.
Our U.S. facilities are subject to the U.S. environmental standards, including the CAA, the Clean Water Act (CWA), the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), as well as state and local laws and regulations.

ÁñÁ«ÊÓƵC is subject to the environmental laws of Canada, which are comparable to environmental standards in the United States. Environmental regulation in Canada is an area of shared responsibility between the federal government and the provincial governments, which in turn delegate certain matters to municipal governments. Federal environmental statutes include the federal Canadian Environmental Protection Act, 1999 and the Fisheries Act. Various provincial statutes regulate environmental matters such as the release and remediation of hazardous substances; waste storage, treatment and disposal; and releases to air and water. As in the United States, Canadian environmental laws (federal, provincial and local) are undergoing revision and becoming more stringent.
ÁñÁ«ÊÓƵK is subject to the environmental laws of Slovakia and the European Union (EU). A related law of the EU commonly known as Registration, Evaluation, Authorization and Restriction of Chemicals, Regulation 1907/2006 (REACH) requires the registration of certain substances that are produced in the EU or imported into the EU. Although ÁñÁ«ÊÓƵK is currently compliant with REACH, this regulation is becoming increasingly stringent. Slovakia is also currently considering a law implementing an EU Waste Framework Directive that would more strictly regulate waste disposal and increase fees for waste disposed of in landfills including privately owned landfills. The intent of the waste directive is to encourage recycling and because Slovakia has not adopted implementing legislation, we cannot estimate the full financial impact of this prospective legislation at this time.
The EU’s Industry Emission Directive will require implementation of EU determined best available techniques (BATs) to reduce environmental impacts as well as compliance with BAT associated emission levels. This directive includes operational requirements for air emissions, wastewater discharges, solid waste disposal and energy conservation, dictates certain operating practices and imposes stricter emission limits. Producers will be required to be in compliance with the iron and steel BAT by March 8, 2016, unless specific extensions are granted by the Slovak environmental authority. We are currently evaluating the costs of complying with BAT, but our most recent broad estimate of likely capital expenditures is $200 million to $250 million over the 2014 to 2016 period. This amount has been reduced from prior estimates due to the exclusion of a project to upgrade our boilers at the power plant, which is discussed separately below, and because we now believe we can comply with certain of the BAT parameters without capital investments due to improved maintenance and operating practices. We are currently investigating the possibility of obtaining EU grants to fund a portion of these capital expenditures. We also believe there will be increased operating costs, such as increased energy and maintenance costs, but we are currently unable to reliably estimate them.
Due to other EU legislation, we will be required to make changes to the boilers at our steam and power generation plant in order to comply with stricter air emission limits. In January of 2014, the operation of ÁñÁ«ÊÓƵK's boilers was approved by the European Commission as part of Slovakia's Transitional National Plan (TNP) for bringing all boilers in Slovakia into BAT compliance no later than 2020. The TNP establishes parameters for determining the date by which specific boilers are required to reach compliance with the new air standards, which has been determined to be October 2017 for our boilers. This gives us the flexibility of delaying the completion of the project to upgrade our boilers to no later than that date, although we may choose to accelerate the implementation of this project in order to qualify for supplementary support payments as part of Slovakia's renewable energy program. This will result in a reduction in electricity costs once the project is completed. The current projected cost to reconstruct one existing boiler and build one new boiler to achieve compliance is broadly estimated at $150 million.

86

Table of Contents

A Memorandum of Understanding was signed in March of 2013 between U. S. Steel and the government of Slovakia. The Memorandum of Understanding outlines areas in which the government and U. S. Steel will work together to help create a more competitive environment and conditions for ÁñÁ«ÊÓƵK. Some of the incentives the government of Slovakia agreed to provide include potential participation in a renewable energy program that provides the opportunity to reduce electricity costs as well as the potential for government grants and other support concerning investments in environmental control technology that may be required under the recently implemented BAT requirements. There are many conditions and uncertainties regarding the grants, including matters controlled by the EU, but the value could be as much as 75 million. In return, U. S. Steel agreed to achieve employment level reduction goals at ÁñÁ«ÊÓƵK only through the use of natural attrition, except in cases of extreme economic conditions, as outlined in ÁñÁ«ÊÓƵK's current collective labor agreement. U. S. Steel also agreed to pay the government of Slovakia specified declining amounts should U. S. Steel sell ÁñÁ«ÊÓƵK within five years of signing the Memorandum of Understanding.
U. S. Steel has incurred and will continue to incur substantial capital, operating and maintenance and remediation expenditures as a result of environmental laws and regulations, which in recent years have been mainly for process changes in order to meet CAA obligations and similar obligations in Europe and Canada. In the future, compliance with carbon dioxide (CO2) emission requirements may include substantial costs for emission allowances, restriction of production and higher prices for coking coal, natural gas and electricity generated by carbon based systems. Since it is difficult to predict what requirements will ultimately be imposed in the United States, Canada and Europe, it is difficult to estimate the likely impact on U. S. Steel, but it could be substantial. To the extent these expenditures, as with all costs, are not ultimately reflected in the prices of U. S. Steel’s products and services, operating results will be reduced. U. S. Steel believes that our major North American and many European integrated steel competitors are confronted with substantially similar conditions and thus does not believe that its relative position with regard to such competitors will be materially affected by the impact of environmental laws and regulations. However, if the final requirements do not recognize the fact that the integrated steel process involves a series of chemical reactions involving carbon that create CO2 emissions, our competitive position relative to mini mills will be adversely impacted. Our competitive position compared to producers in developing nations, such as China, Russia, Ukraine and India, will be harmed unless such nations require commensurate reductions in CO2 emissions. Competing materials such as plastics may not be similarly impacted. The specific impact on each competitor may vary depending on a number of factors, including the age and location of its operating facilities and its production methods. U. S. Steel is also responsible for remediation costs related to former and present operating locations and disposal of environmentally sensitive materials. Many of our competitors, including North American producers, or their successors, that have been the subject of bankruptcy relief have no or substantially lower liabilities for such matters.

U. S. Steel’s environmental expenditures were as follows:

(Dollars in millions)
 
 
 
 
 
 
 
 
2013
 
2012
 
2011
North America:
 
 
 
 
 
 
Capital
 
$
51

 
$
48

 
$
73

Compliance
 
 
 
 
 
 
Operating & maintenance
 
322

 
347

 
350

Remediation(a)
 
56

 
34

 
35

Total North America
 
$
429

 
$
429

 
$
458

ÁñÁ«ÊÓƵE:
 
 
 
 
 
 
Capital
 
$
13

 
$
5

 
$
27

Compliance
 
 
 
 
 
 
Operating & maintenance
 
16

 
14

 
19

Remediation(a)
 
9

 
7

 
10

Total ÁñÁ«ÊÓƵE
 
$
38

 
$
26

 
$
56

Total U. S. Steel
 
$
467

 
$
455

 
$
514

(a)
These amounts include spending charged against remediation reserves, net of recoveries where permissible, but do not include non-cash provisions recorded for environmental remediation.

U. S. Steel’s environmental capital expenditures accounted for 13 percent of total capital expenditures in 2013, seven percent in 2012 and 12 percent in 2011.


87

Table of Contents

Environmental compliance expenditures represented three percent of U. S. Steel's total costs and expenses in 2013 and two percent of U. S. Steel’s total costs and expenses in 2012 and 2011. Remediation spending during 2011 through 2013 was mainly related to remediation activities at former and present operating locations.

RCRA establishes standards for the management of solid and hazardous wastes. Besides affecting current waste disposal practices, RCRA also addresses the environmental effects of certain past waste disposal operations, the recycling of wastes and the regulation of storage tanks.

U. S. Steel is in the study phase of RCRA corrective action programs at our Fairless Plant and Lorain Tubular Operations. RCRA corrective action programs have also been initiated at Gary Works, Fairfield Works and ÁñÁ«ÊÓƵ-POSCO Industries. Until the studies are completed at these facilities, U. S. Steel is unable to estimate the total cost of remediation activities that will be required.

For discussion of other relevant environmental items see “Item 3. Legal Proceedings – Environmental Proceedings.”

The following table shows activity with respect to environmental remediation liabilities for the years ended December 31, 2013 and December 31, 2012. These amounts exclude liabilities related to asset retirement obligations accounted for in accordance with ASC Topic 410. See Note 17 to the Consolidated Financial Statements.

(Dollars in millions)
 
2013
 
2012
Beginning Balance
 
$
203

 
$
206

Plus: Additions
 
45

 
13

Less: Payments
 
(15
)
 
(16
)
Ending Balance
 
$
233

 
$
203


New or expanded environmental requirements, which could increase U. S. Steel’s environmental costs, may arise in the future. U. S. Steel intends to comply with all legal requirements regarding the environment, but since many of them are not fixed or presently determinable (even under existing legislation) and may be affected by future legislation, it is not possible to predict accurately the ultimate cost of compliance, including remediation costs which may be incurred and penalties which may be imposed. However, based on presently available information and existing laws and regulations as currently implemented, U. S. Steel does not anticipate that environmental compliance expenditures (including operating and maintenance and remediation) will materially increase in 2014. U. S. Steel’s environmental capital expenditures are expected to be approximately $149 million in 2014, $90 million of which is related to projects at ÁñÁ«ÊÓƵE. U. S. Steel's environmental expenditures for 2014 for operating and maintenance and for remediation projects are expected to be approximately $300 million and $25 million, respectively of which approximately $15 million in each category is related to ÁñÁ«ÊÓƵE. Predictions beyond 2014 can only be broad-based estimates, which have varied, and will continue to vary, due to the ongoing evolution of specific regulatory requirements, the possible imposition of more stringent requirements and the availability of new technologies to remediate sites, among other matters. Based upon currently identified projects, U. S. Steel anticipates that environmental capital expenditures will be approximately $112 million in 2015, including $83 million for ÁñÁ«ÊÓƵE; however, actual expenditures may vary as the number and scope of environmental projects are revised as a result of improved technology or changes in regulatory requirements and could increase if additional projects are identified or additional requirements are imposed.

Asbestos Litigation

As of December 31, 2013, U. S. Steel was a defendant in approximately 720 active asbestos cases involving approximately 3,320 plaintiffs. About 2,560, or approximately 77 percent, of these claims are currently pending in jurisdictions which permit filings with massive numbers of plaintiffs. Based upon U. S. Steel’s experience in such cases, it believes that the actual number of plaintiffs who ultimately assert claims against U. S. Steel will likely be a small fraction of the total number of plaintiffs.

We are unable to estimate the ultimate outcome of asbestos-related lawsuits, claims and proceedings due to the unpredictable nature of personal injury litigation. Despite this uncertainty, management believes that the ultimate resolution of these matters will not have a material adverse effect on U. S. Steel’s financial condition, although the resolution of such matters could significantly impact results of operations for a particular period. Among the factors considered in reaching this conclusion are: (1) it has been many years since U. S. Steel employed maritime workers or manufactured or sold asbestos containing products; (2) most asbestos containing material was removed or

88

Table of Contents

remediated at U. S. Steel facilities many years ago; and (3) U. S. Steel’s history of trial outcomes, settlements and dismissals. For additional details concerning asbestos litigation see “Item 3. Legal Proceedings – Asbestos Litigation.”

General Litigation
In a series of lawsuits filed in federal court in the Northern District of Illinois beginning September 12, 2008, individual direct or indirect buyers of steel products have asserted that eight steel manufacturers, including U. S. Steel, conspired in violation of antitrust laws to restrict the domestic production of raw steel and thereby to fix, raise, maintain or stabilize the price of steel products in the United States.  The cases are filed as class actions and claim damages related to steel product purchases during the time period of April 1, 2005 to December 31, 2007. A hearing on class certification is expected during the first quarter of 2014.  U. S. Steel is vigorously defending these lawsuits and does not believe that it is probable a liability regarding these matters has been incurred. We are unable to estimate a range of possible loss at this time.

U. S. Steel is the subject of, or a party to, a number of pending or threatened legal actions, contingencies and commitments involving a variety of matters, including laws and regulations relating to the environment, certain of which are discussed in Note 24 to the Consolidated Financial Statements. The ultimate resolution of these contingencies could, individually or in the aggregate, be material to the U. S. Steel Financial Statements. However, management believes that U. S. Steel will remain a viable and competitive enterprise even though it is possible that these contingencies could be resolved unfavorably to U. S. Steel.

The foregoing statements of belief are forward-looking statements. Predictions as to the outcome of pending litigation are subject to substantial uncertainties with respect to (among other things) factual and judicial determinations, and actual results could differ materially from those expressed in these forward-looking statements.

Outlook for First Quarter 2014

We are encouraged by our early progress on the Carnegie Way. We expect total reportable segment and Other Businesses income from operations to increase moderately compared to the fourth quarter.
 
We expect first quarter results for our Flat-rolled segment to increase primarily due to higher average realized prices and shipments as well as reduced repairs and maintenance costs. Average realized prices and shipments are expected to increase as a result of higher contract and spot market prices and improving end user demand after the fourth quarter holiday down time. Repairs and maintenance costs are projected to decrease as compared to the fourth quarter due to the completion of the projects at Gary Works and Fairfield Works. We will also have reduced idled facility costs after the shut down of the iron and steelmaking facilities at Hamilton Works. Raw materials costs, primarily for purchased scrap, are expected to increase. The extraordinary weather conditions have resulted in significantly higher natural gas costs in the first quarter, and we have experienced operating and logistical inefficiencies in both our Flat-rolled and Tubular segments.
    
We expect first quarter results for our European segment to be comparable to the fourth quarter as the benefits of increased average realized prices are offset by an increase in raw materials costs, primarily for iron ore, and other operating costs. Average realized prices are expected to increase compared to the fourth quarter due to a more favorable product mix while shipments are expected to remain comparable.

First quarter results for our Tubular segment are expected to decrease as the benefits of reduced operating costs and increased shipments are more than offset by a decrease in average realized prices and an increase in substrate costs. Average realized prices are projected to decrease primarily due to pricing pressures from continuing high import levels and increased domestic supply. Shipments are expected to increase as drilling activity begins to improve.

We expect cash provided by working capital to improve in the first quarter including an improvement as U. S. Steel extends vendor payment terms consistent with industry standards.
Accounting Standards

See Note 2 to the Consolidated Financial Statements in Part II Item 8 of this Form 10-K.





89

Table of Contents

Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

U. S. Steel is exposed to certain risks relating to its ongoing business operations, including financial, market, political, and economic risks. The following discussion provides information regarding U. S. Steel’s exposure to the risks of changing foreign currency exchange rates, commodity prices and interest rates.

U. S. Steel may enter into derivative financial instrument transactions in order to manage or reduce these market risks. The use of derivative instruments is subject to our corporate governance policies. These instruments are used solely to mitigate market exposure and would not be used for trading or speculative purposes.

U. S. Steel may elect to use hedge accounting for certain commodity or currency transactions. For those transactions, the impact of the effective portion of the hedging instrument will be recognized in other comprehensive income until the transaction is settled. Once the transaction is settled, the effect of the hedged item will be recognized in income. For further information regarding derivative instruments see Notes 1 and 13 to the Consolidated Financial Statements.

Foreign Currency Exchange Rate Risk

U. S. Steel, through ÁñÁ«ÊÓƵE and ÁñÁ«ÊÓƵC, is subject to the risk of price fluctuations due to the effects of exchange rates on revenues and operating costs, firm commitments for capital expenditures and existing assets or liabilities denominated in currencies other than the U.S. dollar, particularly the euro and the Canadian dollar. U. S. Steel historically has made limited use of forward currency contracts to manage exposure to certain currency price fluctuations. U. S. Steel has not elected to use hedge accounting for these contracts. Foreign currency derivative instruments have been marked-to-market and the resulting gains or losses recognized in the current period in net interest and other financial costs. At December 31, 2013 and December 31, 2012, U. S. Steel had open euro forward sales contracts for U.S. dollars (total notional value of approximately $320 million and $408 million, respectively). A 10 percent increase in the December 31, 2013 euro forward rates would result in a $33 million charge to income.

The fair value of our derivatives is determined using Level 2 inputs, which are defined as “significant other observable” inputs. The inputs used include quotes from counterparties that are corroborated with market sources.

We utilize euro-U.S. dollar derivatives to mitigate our currency exposure at ÁñÁ«ÊÓƵE. Volatility in the foreign currency markets could have significant implications for U. S. Steel as a result of foreign currency accounting remeasurement effects. Future foreign currency impacts will depend upon changes in currencies and the extent to which we engage in derivatives transactions. For additional information on U. S. Steel’s foreign currency exchange activity, see Note 13 to the Consolidated Financial Statements.

Commodity Price Risk and Related Risks

In the normal course of our business, U. S. Steel is exposed to market risk or price fluctuations related to the purchase, production or sale of steel products. U. S. Steel is also exposed to price risk related to the purchase, production or sale of coal, coke, natural gas, steel scrap, iron ore and pellets, and zinc, tin and other nonferrous metals used as raw materials. See Note 13 to the Consolidated Financial Statements for further details on U. S. Steel’s derivatives.

U. S. Steel’s market risk strategy has generally been to obtain competitive prices for our products and services and allow operating results to reflect market price movements dictated by supply and demand; however, U. S. Steel has made forward physical purchases to manage exposure to price risk related to the purchases of natural gas and certain non-ferrous metals used in the production process.

U. S. Steel held commodity contracts for natural gas forward buys placed for 2014 that qualified for the normal purchases and normal sales exemption with a total notional value of approximately $146 million at December 31, 2013. Total commodity contracts for natural gas forward buys placed for 2014 at December 31, 2013 represent approximately 31 percent of our expected North American natural gas requirements.


90

Table of Contents

Interest Rate Risk

U. S. Steel is subject to the effects of interest rate fluctuations on certain of our non-derivative financial instruments. A sensitivity analysis of the projected incremental effect of a hypothetical 10 percent increase/decrease in year-end 2013 and 2012 interest rates on the fair value of U. S. Steel’s non-derivative financial instruments is provided in the following table:

(Dollars in millions)
 
 
 
 
 
 
 
 
 
 
2013
 
2012
Non-Derivative Financial Instruments(a)
 
Fair Value(b)
 
Increase in
Fair Value
(c)
 
Fair Value(b)
 
Increase in
Fair  Value
(c)
Financial assets:
 
 
 
 
 
 
 
 
Investments and long-term receivables(d)
 
$
63

 
$

 
$
39

 
$

Financial liabilities:
 
 
 
 
 
 
 
 
Debt(e)(f)
 
$
4,198

 
$
127

 
$
4,113

 
$
128

(a)
Fair values of cash and cash equivalents, current accounts and notes receivable, accounts payable, bank checks outstanding and accrued interest approximate carrying value and are relatively insensitive to changes in interest rates due to the short-term maturity of the instruments. Accordingly, these instruments are excluded from the table.
(b)
See Note 18 to the Consolidated Financial Statements for carrying value of instruments.
(c)
Reflects, by class of financial instrument, the estimated incremental effect of a hypothetical 10 percent decrease in interest rates at December 31, 2013 and 2012, on the fair value of U. S. Steel’s non-derivative financial instruments. For financial liabilities, this assumes a 10 percent decrease in the weighted average yield to maturity of U. S. Steel’s long-term debt at December 31, 2013 and December 31, 2012.
(d)
Fair value was based on Level 2 inputs which were discounted cash flows. U. S. Steel is subject to market risk and liquidity risk related to its investments.
(e)
Excludes capital lease obligations.
(f)
Fair value was determined using Level 2 inputs which were derived from quoted market prices and is based on the yield on public debt where available or current borrowing rates available for financings with similar terms and maturities.

U. S. Steel’s sensitivity to interest rate declines and corresponding increases in the fair value of our debt portfolio would unfavorably affect our results and cash flows only to the extent that we elected to repurchase or otherwise retire all or a portion of our fixed-rate debt portfolio at prices above carrying value.

Safe Harbor

U. S. Steel’s quantitative and qualitative disclosures about market risk include forward-looking statements with respect to management’s opinion about risks associated with U. S. Steel’s use of derivative instruments. These statements are based on certain assumptions with respect to market prices and industry supply of and demand for steel products and certain raw materials. To the extent that these assumptions prove to be inaccurate, future outcomes with respect to U. S. Steel’s hedging programs may differ materially from those discussed in the forward-looking statements.

91

Table of Contents

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 
ÁñÁ«ÊÓƵ
600 Grant Street
Pittsburgh, PA 15219-2800

MANAGEMENT’S REPORT TO STOCKHOLDERS

February 25, 2014

To the stockholders of ÁñÁ«ÊÓƵ:

Financial Statements and Practices

The accompanying consolidated financial statements of ÁñÁ«ÊÓƵ are the responsibility of and have been prepared by ÁñÁ«ÊÓƵ in conformity with accounting principles generally accepted in the United States of America. They necessarily include some amounts that are based on our best judgments and estimates. ÁñÁ«ÊÓƵ’s financial information displayed in other sections of this report is consistent with these financial statements.

ÁñÁ«ÊÓƵ seeks to assure the objectivity and integrity of its financial records by careful selection of its managers, by organizational arrangements that provide an appropriate division of responsibility and by communication programs aimed at assuring that its policies, procedures and methods are understood throughout the organization.

ÁñÁ«ÊÓƵ has a comprehensive, formalized system of internal controls designed to provide reasonable assurance that assets are safeguarded, that financial records are reliable and that information required to be disclosed in reports filed with or submitted to the Securities and Exchange Commission is recorded, processed, summarized and reported within the required time limits. Appropriate management monitors the system for compliance and evaluates it for effectiveness, and the internal auditors independently measure its effectiveness and recommend possible improvements thereto.

The Board of Directors exercises its oversight role in the area of financial reporting and internal control over financial reporting through its Audit Committee. This Committee, composed solely of independent directors, regularly meets (jointly and separately) with the independent registered public accounting firm, management, internal audit and other executives to monitor the proper discharge by each of their responsibilities relative to internal control over financial reporting and ÁñÁ«ÊÓƵ’s financial statements.

Internal Control Over Financial Reporting

ÁñÁ«ÊÓƵ’s management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Exchange Act Rule 13a-15(f). Under the supervision and with the participation of ÁñÁ«ÊÓƵ’s management, including the chief executive officer and chief financial officer, ÁñÁ«ÊÓƵ conducted an evaluation of the effectiveness of its internal control over financial reporting based on the framework in Internal Control – Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission.


F-1

Table of Contents


Based on this evaluation, ÁñÁ«ÊÓƵ’s management concluded that ÁñÁ«ÊÓƵ’s internal control over financial reporting was effective as of December 31, 2013.

The effectiveness of ÁñÁ«ÊÓƵ’s internal control over financial reporting as of December 31, 2013 has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which is included herein.

/S/    MARIO LONGHI
 
/S/    DAVID B. BURRITT
Mario Longhi
 
David B. Burritt
President and
Chief Executive Officer
 
Executive Vice President and
Chief Financial Officer

/S/    GREGORY A. ZOVKO        
 
 
Gregory A. Zovko
 
 
Vice President and Controller
 
 

F-2

Table of Contents

Report of Independent Registered Public Accounting Firm

To the Stockholders of ÁñÁ«ÊÓƵ

In our opinion, the accompanying consolidated balance sheets and the related consolidated statements of operations, comprehensive income/(loss), stockholders’ equity and cash flows present fairly, in all material respects, the financial position of ÁñÁ«ÊÓƵ and its subsidiaries (the Company) at December 31, 2013 and 2012, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2013 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the index appearing under Item 15(a)(2) presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control – Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report to Stockholders – Internal Control Over Financial Reporting. Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company’s internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ PricewaterhouseCoopers LLP
Pittsburgh, Pennsylvania
February 25, 2014

F-3

Table of Contents

UNITED STATES STEEL CORPORATION
CONSOLIDATED STATEMENTS OF OPERATIONS
 
 
Year Ended December 31,
(Dollars in millions, except per share amounts)
 
2013
 
2012
 
2011
Net sales:
 
 
 
 
 
 
Net sales
 
$
16,269

 
$
18,025

 
$
18,626

Net sales to related parties (Note 21)
 
1,155

 
1,303

 
1,258

Total
 
17,424

 
19,328

 
19,884

Operating expenses (income):
 
 
 
 
 
 
Cost of sales (excludes items shown below)
 
16,016

 
17,630

 
18,326

Selling, general and administrative expenses
 
610

 
654

 
733

Depreciation, depletion and amortization (Notes 10 and 11)
 
684

 
661

 
681

Income from investees
 
(40
)
 
(144
)
 
(85
)
Impairment of goodwill (Note 11)
 
1,806

 

 

Restructuring and other charges (Note 23)
 
248

 

 

Net loss (gain) on disposals of assets (Note 4)
 

 
296

 
(25
)
Other income, net
 

 
(16
)
 
(11
)
Total
 
19,324

 
19,081

 
19,619

(Loss) income from operations
 
(1,900
)
 
247

 
265

Interest income
 
(3
)
 
(7
)
 
(6
)
Interest expense (Note 5)
 
266

 
214

 
190

Other financial costs (Note 5)
 
69

 
34

 
54

Net interest and other financial costs
 
332

 
241

 
238

(Loss) income before income taxes and noncontrolling interests
 
(2,232
)
 
6

 
27

Income tax (benefit) provision (Note 8)
 
(560
)
 
131

 
80

Net loss
 
(1,672
)
 
(125
)
 
(53
)
Less: Net loss attributable to noncontrolling interests
 

 
(1
)
 

Net loss attributable to ÁñÁ«ÊÓƵ
 
$
(1,672
)
 
$
(124
)
 
$
(53
)
Loss per common share (Note 6)
 
 
 
 
 
 
Net loss per share attributable to ÁñÁ«ÊÓƵ shareholders:
 
 
 
 
 
 
—  Basic
 
(11.56
)
 
(0.86
)
 
(0.37
)
—  Diluted
 
(11.56
)
 
(0.86
)
 
(0.37
)

The accompanying notes are an integral part of these consolidated financial statements.

F-4

Table of Contents


UNITED STATES STEEL CORPORATION
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME/(LOSS)
 
 
Year Ended December 31,
(Dollars in millions)
 
2013
 
2012
 
2011
Net loss
 
$
(1,672
)
 
$
(125
)
 
$
(53
)
Other comprehensive income (loss), net of tax:
 
 
 
 
 
 
Changes in foreign currency translation adjustments
 
30

 
114

 
(44
)
Changes in pension and other employee benefit accounts (a)
 
1,486

 
(15
)
 
(255
)
Total other comprehensive income (loss), net of tax
 
1,516

 
99

 
(299
)
Comprehensive loss including noncontrolling interest
 
(156
)
 
(26
)
 
(352
)
Comprehensive loss attributable to noncontrolling interest
 

 
(1
)
 

Comprehensive loss attributable to ÁñÁ«ÊÓƵ
 
$
(156
)
 
$
(25
)
 
$
(352
)
(a) Related income tax (provision) benefit:
 
 
 
 
 
 
Pension and other benefits adjustments
 
$
(762
)
 
$
(74
)
 
$
52


The accompanying notes are an integral part of these consolidated financial statements.

F-5

Table of Contents

UNITED STATES STEEL CORPORATION
CONSOLIDATED BALANCE SHEETS
 
 
December 31,
(Dollars in millions)
 
2013
 
2012
Assets
 
 
 
 
Current assets:
 
 
 
 
Cash and cash equivalents
 
$
604

 
$
570

Receivables, less allowance of $53 and $55
 
1,818

 
1,862

Receivables from related parties (Note 21)
 
157

 
218

Inventories (Note 7)
 
2,688

 
2,503

Income tax receivable (Note 8)
 
185

 
10

Deferred income tax benefits (Note 8)
 
576

 
293

Other current assets
 
50

 
40

Total current assets
 
6,078

 
5,496

Investments and long-term receivables, less allowance of $3 for both periods (Note 9)
 
621

 
609

Property, plant and equipment, net (Note 10)
 
5,922

 
6,408

Intangibles — net (Note 11)
 
271

 
253

Goodwill (Note 11)
 
4

 
1,822

Deferred income tax benefits (Note 8)
 
16

 
302

Other noncurrent assets, less allowance of $7 and $0
 
231

 
327

Total assets
 
13,143

 
$
15,217

Liabilities
 
 
 
 
Current liabilities:
 
 
 
 
Accounts payable and other accrued liabilities
 
$
1,681

 
$
1,722

Accounts payable to related parties (Note 21)
 
73

 
78

Bank checks outstanding
 

 
15

Payroll and benefits payable
 
974

 
977

Accrued taxes (Note 8)
 
140

 
146

Accrued interest
 
54

 
50

Short-term debt and current maturities of long-term debt (Note 14)
 
323

 
2

Total current liabilities
 
3,245

 
2,990

Long-term debt, less unamortized discount (Note 14)
 
3,616

 
3,936

Employee benefits (Note 16)
 
2,064

 
4,416

Deferred income tax liabilities (Note 8)
 
445

 

Deferred credits and other noncurrent liabilities
 
424

 
397

Total liabilities
 
9,794

 
11,739

Contingencies and commitments (Note 24)
 

 

Stockholders’ Equity
 
 
 
 
Common stock issued — 150,925,911 shares issued (par value $1 per share, authorized 400,000,000 shares)
 
151

 
151

Treasury stock, at cost (6,245,666 shares and 6,643,553 shares)
 
(480
)
 
(521
)
Additional paid-in capital
 
3,667

 
3,652

Retained earnings
 
1,762

 
3,463

Accumulated other comprehensive loss
 
(1,752
)
 
(3,268
)
Total ÁñÁ«ÊÓƵ stockholders’ equity
 
3,348

 
3,477

Noncontrolling interests
 
1

 
1

Total liabilities and stockholders’ equity
 
13,143

 
$
15,217


The accompanying notes are an integral part of these consolidated financial statements.

F-6

Table of Contents

UNITED STATES STEEL CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS
 
 
Year Ended December 31,
(Dollars in millions)
 
2013
 
2012
 
2011
Increase (decrease) in cash and cash equivalents
 
 
 
 
 
 
Operating activities:
 
 
 
 
 
 
Net loss
 
$
(1,672
)
 
$
(125
)
 
$
(53
)
Adjustments to reconcile net cash (used in) provided by operating activities:
 
 
 
 
 
 
Depreciation, depletion and amortization (Notes 10 and 11)
 
684

 
661

 
681

Impairment of goodwill (Note 11)
 
1,806

 

 

Non-cash restructuring and other charges (Note 23)
 
248

 

 

Provision for doubtful accounts
 
5

 
(1
)
 
3

Pensions and other postretirement benefits
 
(28
)
 
(181
)
 
(24
)
Deferred income taxes (Note 8)
 
(359
)
 
74

 
(68
)
Net loss (gain) on disposal of assets (Note 4)
 

 
296

 
(25
)
Currency remeasurement loss/(gain)
 
7

 
(15
)
 
40

Distributions received, net of equity investees income
 
(27
)
 
(45
)
 
(52
)
Changes in:
 
 
 
 
 
 
Current receivables
 
114

 
246

 
(424
)
Inventories
 
(201
)
 
192

 
(460
)
Current accounts payable and accrued expenses
 
(61
)
 
(103
)
 
332

Income taxes receivable/payable
 
(187
)
 
17

 
133

All other, net
 
85

 
119

 
85

Net cash provided by operating activities
 
414

 
1,135

 
168

Investing activities:
 
 
 
 
 
 
Capital expenditures
 
(477
)
 
(723
)
 
(848
)
Acquisition of intangible assets (Note 11)
 
(12
)
 

 

Disposal of assets
 
3

 
155

 
41

Change in restricted cash, net
 
100

 
(21
)
 
35

Investments, net
 
(7
)
 
(13
)
 
(41
)
Net cash used in investing activities
 
(393
)
 
(602
)
 
(813
)
Financing activities:
 
 
 
 
 
 
Revolving credit facilities   - borrowings
 

 
523

 
4,715

 - repayments
 

 
(653
)
 
(4,570
)
(Payments on) proceeds from Receivables Purchase Agreement
 

 
(380
)
 
380

Issuance of long-term debt, net of financing costs
 
575

 
485

 
193

Repayment of long-term debt
 
(542
)
 
(319
)
 
(216
)
Receipts from exercise of stock options
 

 

 
3

Distributions from noncontrolling interests
 

 

 
1

Dividends paid
 
(29
)
 
(29
)
 
(29
)
Net cash provided by (used in) financing activities
 
4

 
(373
)
 
477

Effect of exchange rate changes on cash
 
9

 
2

 
(2
)
Net increase (decrease) in cash and cash equivalents
 
34

 
162

 
(170
)
Cash and cash equivalents at beginning of year
 
570

 
408

 
578

Cash and cash equivalents at end of year
 
$
604

 
$
570

 
$
408

See Note 20 for supplemental cash flow information.

The accompanying notes are an integral part of these consolidated financial statements.

F-7

Table of Contents

UNITED STATES STEEL CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

 
 
Dollars in Millions
 
Shares in Thousands
 
 
2013
 
2012
 
2011
 
2013
 
2012
 
2011
Common stock:
 
 
 
 
 
 
 
 
 
 
 
 
Balance at beginning of year
 
$
151

 
$
151

 
$
151

 
150,926

 
150,926

 
150,926

Common stock issued
 

 

 

 

 

 

Balance at end of year
 
$
151

 
$
151

 
$
151

 
150,926

 
150,926

 
150,926

Treasury stock:
 
 
 
 
 
 
 
 
 
 
 
 
Balance at beginning of year
 
$
(521
)
 
$
(550
)
 
$
(580
)
 
(6,644
)
 
(6,922
)
 
(7,252
)
Common stock reissued for employee/non-employee director stock plans
 
41

 
29

 
30

 
398

 
278

 
330

Balance at end of year
 
$
(480
)
 
$
(521
)
 
$
(550
)
 
(6,246
)
 
(6,644
)
 
(6,922
)
Additional paid-in capital:
 
 
 
 
 
 
 
 
 
 
 
 
Balance at beginning of year
 
$
3,652

 
$
3,650

 
$
3,650

 
 
 
 
 
 
Issuance of conversion option in 2019 Senior Convertible Notes, net of tax
 
$
31

 
$

 
$

 
 
 
 
 
 
Employee stock plans
 
(16
)
 
2

 

 
 
 
 
 
 
Balance at end of year
 
$
3,667

 
$
3,652

 
$
3,650

 
 
 
 
 
 

The accompanying notes are an integral part of these consolidated financial statements.

F-8

Table of Contents

UNITED STATES STEEL CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(Continued)

 
 
 
 
Comprehensive (Loss) Income
(Dollars in millions)
 
2013
 
2012
 
2011
 
2013
 
2012
 
2011
Retained earnings:
 
 
 
 
 
 
 
 
 
 
 
 
Balance at beginning of year
 
$
3,463

 
$
3,616

 
$
3,698

 
 
 
 
 
 
Net loss attributable to ÁñÁ«ÊÓƵ
 
(1,672
)
 
(124
)
 
(53
)
 
$
(1,672
)
 
$
(124
)
 
$
(53
)
Dividends on common stock
 
(29
)
 
(29
)
 
(29
)
 
 
 
 
 
 
Balance at end of year
 
$
1,762

 
$
3,463

 
$
3,616

 
 
 
 
 
 
Accumulated other comprehensive (loss) income:
 
 
 
 
 
 
 
 
 
 
 
 
Pension and other benefit adjustments (Note 16):
 
 
 
 
 
 
 
 
 
 
 
 
Balance at beginning of year
 
$
(3,613
)
 
$
(3,598
)
 
$
(3,343
)
 
 
 
 
 
 
Changes during year, net of taxes(a)
 
1,444

 
(8
)
 
(230
)
 
1,444

 
(8
)
 
(230
)
Changes during year, equity investee net of taxes(a)
 
42

 
(7
)
 
(25
)
 
42

 
(7
)
 
(25
)
Balance at end of year
 
$
(2,127
)
 
$
(3,613
)
 
$
(3,598
)
 
 
 
 
 
 
Foreign currency translation adjustments:
 
 
 
 
 
 
 
 
 
 
 
 
Balance at beginning of year
 
$
345

 
$
231

 
$
275

 
 
 
 
 
 
Changes during year
 
30

 
114

 
(44
)
 
30

 
114

 
(44
)
Balance at end of year
 
375

 
345

 
231

 
 
 
 
 
 
Total balances at end of year
 
$
(1,752
)
 
$
(3,268
)
 
$
(3,367
)
 
 
 
 
 
 
Total stockholders’ equity
 
$
3,348

 
$
3,477

 
$
3,500

 
 
 
 
 
 
Noncontrolling interests:
 
 
 
 
 
 
 
 
 
 
 
 
Balance at beginning of year
 
$
1

 
$
1

 
$
1

 
 
 
 
 
 
Net loss
 

 
(1
)
 

 

 
(1
)
 

Other
 

 
1

 

 
 
 
 
 
 
Balance at end of year
 
$
1

 
$
1

 
$
1

 
 
 
 
 
 
Total comprehensive loss
 
 
 
 
 
 
 
$
(156
)
 
$
(26
)
 
$
(352
)
(a) Related income tax (provision) benefit:
 
 
 
 
 
 
 
 
 
 
 
 
Pension and other benefits adjustments
 
$
(762
)
 
$
(74
)
 
$
52

 
 
 
 
 
 

The accompanying notes are an integral part of these consolidated financial statements.

F-9

Table of Contents

1. Nature of Business and Significant Accounting Policies

Nature of Business
ÁñÁ«ÊÓƵ (U. S. Steel or the Company) produces and sells steel plant products, including flat-rolled and tubular products, in North America and Europe. Operations in North America also include iron ore and coke production facilities, railroad services and real estate operations.

Significant Accounting Policies
Principles applied in consolidation
These financial statements include the accounts of U. S. Steel and its majority-owned subsidiaries. Additionally, variable interest entities for which U. S. Steel is the primary beneficiary are included in the consolidated financial statements and their impacts are either partially or completely offset by noncontrolling interests. Intercompany accounts, transactions and profits have been eliminated in consolidation.

Investments in entities over which U. S. Steel has significant influence are accounted for using the equity method of accounting and are carried at U. S. Steel’s share of net assets plus loans, advances and our share of earnings less distributions. Differences in the basis of the investment and the underlying net asset value of the investee, if any, are amortized into earnings over the remaining useful life of the associated assets.

Income or loss from investees includes U. S. Steel’s share of income or loss from equity method investments, which is generally recorded a month in arrears, except for significant and unusual items which are recorded in the period of occurrence. Gains or losses from changes in ownership of unconsolidated investees are recognized in the period of change. Intercompany profits and losses on transactions with equity investees have been eliminated in consolidation, subject to lower of cost or market inventory adjustments.

U. S. Steel evaluates impairment of its equity method investments whenever circumstances indicate that a decline in value below carrying value is other than temporary. Under these circumstances, we adjust the investment down to its estimated fair value, which then becomes its new carrying value.

Investments in companies whose equity has no readily determinable fair value are carried at cost and are periodically reviewed for impairment.

Use of estimates
Generally accepted accounting principles require management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities at year-end and the reported amounts of revenues and expenses during the year. Significant items subject to such estimates and assumptions include the carrying value of property, plant and equipment; goodwill and intangible assets; valuation allowances for receivables, inventories and deferred income tax assets and liabilities; environmental liabilities; liabilities for potential tax deficiencies; potential litigation claims and settlements; and assets and obligations related to employee benefits. Actual results could differ materially from the estimates and assumptions used.

Sales recognition
Sales are recognized when products are shipped, properties are sold or services are provided to customers; the sales price is fixed and determinable; collectability is reasonably assured; and title and risks of ownership have passed to the buyer. Shipping and other transportation costs charged to buyers are recorded in both sales and cost of sales.

Cash and cash equivalents
Cash and cash equivalents include cash on deposit and investments in highly liquid debt instruments with maturities of three months or less.

Inventories
Inventories are carried at the lower of cost or market. Fixed costs related to abnormal production capacity are expensed in the period incurred rather than capitalized into inventory.

LIFO (last-in, first-out) is the predominant method of inventory costing for inventories in the United States and FIFO (first-in, first-out) is the predominant method used in Canada and Europe. The LIFO method of inventory costing was used on 59 percent and 56 percent of consolidated inventories at December 31, 2013 and 2012, respectively.


F-10

Table of Contents


Derivative instruments
U. S. Steel uses commodity-based and foreign currency derivative instruments to manage its exposure to price and foreign currency exchange rate risk. Forward physical purchase contracts and foreign exchange forward contracts are used to reduce the effects of fluctuations in the purchase price of natural gas and certain nonferrous metals and also certain business transactions denominated in foreign currencies. U. S. Steel has not elected to designate derivative instruments as qualifying for hedge accounting treatment. As a result, the changes in fair value of these derivatives are recognized immediately in results of operations. See Note 13 for further details on U. S. Steel’s derivatives.

Goodwill and identifiable intangible assets
Goodwill represents the excess of the cost over the fair value of acquired identifiable tangible and intangible assets and liabilities assumed from businesses acquired. Goodwill is tested for impairment at the reporting unit level annually in the third quarter and whenever events or circumstances indicate that the carrying value may not be recoverable.

U. S. Steel evaluates goodwill for impairment by either performing a qualitative evaluation or a two-step quantitative test, which involves comparing the estimated fair value of the associated reporting unit to its carrying value, including goodwill. The qualitative evaluation is an assessment of factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount, including goodwill. Factors considered as part of the qualitative assessment include entity-specific, industry, market and general economic conditions. U. S. Steel may elect to bypass this qualitative assessment for some or all of its reporting units and perform a two step quantitative test. The quantitative test involves estimating a reporting unit's fair value based upon a discounted cash flow model, using a market participant approach. U. S. Steel performed the two step quantitative test during the third quarter of 2013 and recorded an impairment charge of approximately $1.8 billion.

U. S. Steel has determined that certain acquired intangible assets have indefinite useful lives. These assets are reviewed for impairment annually and whenever events or circumstances indicate that the carrying value may not be recoverable.

Identifiable intangible assets with finite lives are amortized on a straight-line basis over their estimated useful lives and are reviewed for impairment whenever events or circumstances indicate that the carrying value may not be recoverable.

See Note 11 for further details on our evaluation of goodwill and intangible asset impairment.

Property, plant and equipment
Property, plant and equipment is carried at cost and is depreciated on a straight-line basis over the estimated useful lives of the assets.

Depletion of mineral properties is based on rates which are expected to amortize cost over the estimated tonnage of minerals to be removed.

U. S. Steel evaluates impairment of its property, plant and equipment whenever circumstances indicate that the carrying value may not be recoverable. Asset impairments are recognized when the carrying value of an asset grouping exceeds its aggregate projected undiscounted cash flows.

When property, plant and equipment depreciated on a group basis is sold or otherwise disposed of, proceeds are credited to accumulated depreciation, depletion and amortization with no immediate effect on income. When property, plant and equipment depreciated on an individual basis is sold or otherwise disposed of, any gains or losses are reflected in income. Gains on disposal of long-lived assets are recognized when earned. If a loss on disposal is expected, such losses are recognized when the assets are reclassified as assets held for sale or when impaired as part of an asset group’s impairment. During the third quarter of 2013, the requirement to move to the second step of the annual goodwill impairment analysis was considered a triggering event and U. S. Steel completed a review of its long-lived assets. This review performed during the third quarter of 2013 indicated that the assets were not impaired. There were no triggering events that required fixed assets to be evaluated for impairment in 2012. During the third and fourth quarters of 2011, we evaluated the U. S. Steel Europe (ÁñÁ«ÊÓƵE) asset group’s long-lived assets for impairment because the potential disposition of U. S. Steel Serbia (ÁñÁ«ÊÓƵS) was considered a triggering event. Although we recorded a loss of $399 million as a result of the sale of ÁñÁ«ÊÓƵS in the first quarter of 2012 (this transaction did not meet held-for-sale criteria at December 31, 2011), the fixed

F-11

Table of Contents

asset impairment evaluations did not indicate an impairment at December 31, 2011 since we test the fixed assets at the asset group level, which was ÁñÁ«ÊÓƵE at that date. ÁñÁ«ÊÓƵE consisted of both U. S. Steel Košice (ÁñÁ«ÊÓƵK) and ÁñÁ«ÊÓƵS and the estimated fair value of the ÁñÁ«ÊÓƵE asset group exceeded its carrying value and resulted in no impairment of fixed assets at the ÁñÁ«ÊÓƵE asset group level at December 31, 2011.

Major maintenance activities
U. S. Steel incurs maintenance costs on all of its major equipment. Costs that extend the life of the asset, materially add to its value, or adapt the asset to a new or different use are separately capitalized in property, plant and equipment and are depreciated over the estimated useful life. All other repair and maintenance costs are expensed as incurred.

Environmental remediation
Environmental expenditures are capitalized if the costs mitigate or prevent future contamination or if the costs improve existing assets’ environmental safety or efficiency. U. S. Steel provides for remediation costs and penalties when the responsibility to remediate is probable and the amount of associated costs is reasonably estimable. The timing of remediation accruals typically coincides with completion of studies defining the scope of work to be undertaken or the commitment to a formal plan of action. Remediation liabilities are accrued based on estimates of believed environmental exposure and are discounted if the amount and timing of the cash disbursements are readily determinable.

Asset retirement obligations
Asset retirement obligations (AROs) are initially recorded at fair value and are capitalized as part of the cost of the related long-lived asset and depreciated in accordance with U. S. Steel’s depreciation policies for property, plant and equipment. The fair value of the obligation is determined as the discounted value of expected future cash flows. Accretion expense is recorded each month to increase this discounted obligation over time. Certain AROs related to disposal costs of the majority of assets at our integrated steel facilities are not recorded because they have an indeterminate settlement date. These AROs will be initially recognized in the period in which sufficient information exists to estimate their fair value. See Note 17 for further details on U. S. Steel's AROs.

Pensions, other postretirement and postemployment benefits
U. S. Steel has defined contribution or multi-employer arrangements for pension benefits for more than half of its North American employees and non-contributory defined benefit pension plans covering the remaining North American employees. U. S. Steel has defined benefit retiree health care and life insurance plans (Other Benefits) that cover the majority of its employees in North America upon their retirement. Non-union salaried employees in the United States hired on or after July 1, 2003 participate in a defined contribution plan. In addition, most domestic salaried employees participate in defined contribution plans (401(k) plans). The Steelworkers Pension Trust (SPT), a multi-employer pension plan, to which U. S. Steel contributes on the basis of a fixed dollar amount for each hour worked by participating employees, currently covers approximately 60 percent of our union employees in the United States. Government-sponsored programs into which U. S. Steel makes required contributions cover the majority of U. S. Steel’s European employees. In Canada, the majority of employees of ÁñÁ«ÊÓƵC participate in defined benefit pension plans and retiree health and life insurance plans. Union employees hired after October 15, 2011 at the Hamilton Plant and after April 16, 2010 at the Lake Erie Plant are covered by defined contribution arrangements. Non-union salaried employees in Canada hired after 1997 participate in defined contribution arrangements.

The net pension and Other Benefits obligations and the related periodic costs are based on, among other things, assumptions of the discount rate, estimated return on plan assets, salary increases, the mortality of participants and the current level and future escalation of health care costs. Additionally, U. S. Steel recognizes an obligation to provide postemployment benefits for disability-related claims covering indemnity and medical payments for certain employees in North America. The obligation for these claims and the related periodic costs are measured using actuarial techniques and assumptions. Actuarial gains and losses occur when actual experience differs from any of the many assumptions used to value the benefit plans, or when assumptions change. The Company recognizes into income on an annual basis any unrecognized actuarial net gains or losses that exceed 10 percent of the larger of the projected benefit obligation or plan assets (the corridor), amortized over the plan participants' average life expectancy or average future service, depending on the demographics of the plan.

Concentration of credit and business risks
U. S. Steel is exposed to credit risk in the event of nonpayment by customers, principally within the automotive, container, construction, steel service center, appliance and electrical, conversion, and oil, gas and petrochemical industries. Changes in these industries may significantly affect U. S. Steel’s financial performance and

F-12

Table of Contents

management’s estimates. U. S. Steel mitigates its exposure to credit risk by performing ongoing credit evaluations and, when deemed necessary, requiring letters of credit, credit insurance, prepayments, guarantees or other collateral.

The majority of U. S. Steel’s customers are located in North America and Europe. No single customer accounted for more than 10 percent of gross annual revenues.

Foreign currency translation
U. S. Steel is subject to the risk of the effects of exchange rates on revenues and operating costs and existing assets or liabilities denominated in currencies other than our reporting currency, the U.S. dollar.

The functional currency for U. S. Steel Europe (ÁñÁ«ÊÓƵE) is the euro (). U. S. Steel Canada Inc.’s (ÁñÁ«ÊÓƵC) functional currency is the Canadian dollar (C$). Assets and liabilities of these entities are translated into U.S. dollars at period-end exchange rates. Revenue and expenses are translated using the average exchange rate for the reporting period. Resulting translation adjustments are recorded in the accumulated other comprehensive income (loss) component of stockholders’ equity. Gains and losses from foreign currency transactions are included in net income (loss) for the period.

Stock-based compensation
U. S. Steel accounts for its various stock-based employee compensation plans in accordance with the guidance in Accounting Standards Codification (ASC) Topic 718 on stock compensation (see Note 12).

Deferred taxes
Deferred tax assets and liabilities are recognized for the estimated future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax basis. The realization of deferred tax assets is assessed quarterly based on several interrelated factors. These factors include U. S. Steel’s expectation to generate sufficient future taxable income and the projected time period over which these deferred tax assets will be realized. U. S. Steel records a valuation allowance when necessary to reduce deferred tax assets to the amount that will more likely than not be realized. Deferred tax liabilities have not been recognized for the undistributed earnings of certain foreign subsidiaries because management intends to indefinitely reinvest such earnings in foreign operations. See Note 8 for further details of deferred taxes.

Insurance
U. S. Steel maintains insurance for certain property damage, equipment, business interruption and general liability exposures; however, insurance is applicable only after certain deductibles and retainages. U. S. Steel is self-insured for certain other exposures including workers’ compensation (where permitted by law) and automobile liability. Liabilities are recorded for workers’ compensation and personal injury obligations. Other costs resulting from losses under deductible or retainage amounts or not otherwise covered by insurance are charged against income upon occurrence.

Sales taxes
Sales are recorded net of sales taxes charged to customers. Sales taxes primarily relate to value-added tax on sales.

Reclassifications and out of period adjustments
Certain reclassifications of prior years’ data have been made to conform to the current year presentation.

In 2013, the Company revised its classification of certain deferred tax assets as of December 31, 2012. The revision resulted in a $122 million increase to current deferred tax assets with a corresponding decrease to non-current deferred tax assets. The revision, which the Company determined is not material to its consolidated financial position, had no impact on the Consolidated Statement of Operations, Statement of Comprehensive Income/(Loss) or Statement of Cash Flows.

In 2013, the Company recorded two out of period adjustments to correct the presentation of deferred taxes. The adjustments recorded were a tax benefit of approximately $13 million and a tax charge of approximately $19 million for deferred taxes related to fixed assets for prior years' differences between the financial statement carrying amounts of assets and liabilities and their tax basis for U.S. federal and state income tax purposes. Management has determined the impact of these out of period adjustments was not material to any prior period or the year ended December 31, 2013 and as a result, recorded the adjustments in the 2013 results.


F-13

Table of Contents

In 2011, the Company recorded an out of period adjustment related to its enterprise resource planning project to recorded fixed assets with a corresponding increase to net income of approximately $10 million. Management has determined that the impact of the out of period adjustment was not material to any prior period or the year ended December 31, 2011, and as a result, recorded the adjustment in the 2011 results.

2. New Accounting Standards
On February 5, 2013, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update No. 2013-02, Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income (ASU 2013-02). ASU 2013-02 requires companies to present information about reclassification adjustments from accumulated other comprehensive income, including the amount of the reclassification and the income statement line items affected by the reclassification. The information must be presented in the financial statements in a single note or on the face of the financial statements. ASU 2013-02 is effective for interim and annual periods beginning after December 15, 2012. U. S. Steel adopted ASU 2013-02 effective January 1, 2013 and has provided the required disclosures in Note 19.
On July 18, 2013, the FASB issued Accounting Standards Update No. 2013-11, Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists (ASU 2013-11). ASU 2013-11 requires the netting of unrecognized tax benefits (UTBs) against a deferred tax asset for a loss or other carryforward that would apply in settlement of the uncertain tax positions. UTBs are required to be netted against all available same-jurisdiction loss or other tax carryforwards that would be utilized, rather than only against carryforwards that are created by the UTBs. ASU 2013-11 is effective for interim and annual periods beginning after December 15, 2013. U. S. Steel early adopted ASU 2013-11 in the second quarter of 2013 on a prospective basis. The adoption did not have a significant impact on U. S. Steel's financial statements.
On July 27, 2012 the FASB issued Accounting Standards Update No. 2012-02, Testing Indefinite-Lived Intangible Assets for Impairment (ASU 2012-02). ASU 2012-02 is intended to reduce the cost and complexity of testing indefinite-lived intangible assets other than goodwill for impairment. It allows companies to perform a qualitative assessment to determine whether further impairment testing of indefinite-lived intangible assets is necessary, similar in approach to the goodwill impairment assessment noted below. ASU 2012-02 was effective for annual and interim impairment tests performed for fiscal years beginning after September 15, 2012; however, early adoption was permitted. U. S. Steel early adopted ASU 2012-02 and performed the qualitative assessment of its indefinite-lived water rights during the third quarter of 2012.

On September 15, 2011, the FASB issued Accounting Standards Update No. 2011-08, Testing Goodwill for Impairment (ASU 2011-08), which amends the guidance in ASC 350-20. The amendments in ASU 2011-08 provide entities with the option of performing a qualitative assessment before performing the first step of a two-step impairment test. If entities determine, on the basis of qualitative factors, it is not more likely than not that the fair value of the reporting unit is less than the carrying amount, then performing a two-step impairment test would be unnecessary. However, if an entity concludes otherwise, then it is required to perform the first step of the two-step impairment test by calculating the fair value of the reporting unit and comparing the fair value with the carrying amount of the reporting unit. If the carrying amount of a reporting unit exceeds its fair value, then the entity is required to perform the second step of the goodwill impairment test to measure the amount of the impairment loss, if any. ASU 2011-08 also provides entities with the option to bypass the qualitative assessment for any reporting unit in any period and proceed directly to the first step of the two-step impairment test. ASU 2011-08 was effective for interim and annual periods beginning after December 15, 2011. U. S. Steel adopted ASU 2011-08 on January 1, 2012.

On June 16, 2011, the FASB issued Accounting Standards Update No. 2011-05, Comprehensive Income (Topic 220): Presentation of Comprehensive Income (ASU 2011-05). The amendments in ASU 2011-05 require entities to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. Additionally, the amendments in ASU 2011-05 require an entity to present on the face of the financial statements reclassification adjustments for items that are reclassified from other comprehensive income to net income in the statement(s) where the components of net income and the components of other comprehensive income are presented. ASU 2011-05 was effective for interim and annual periods beginning after December 15, 2011. On December 23, 2011, the FASB issued Accounting Standards Update No. 2011-12, Comprehensive Income (Topic 220): Deferral of the Effective Date for Amendments to the Presentation of Reclassifications of Items Out of Accumulated Other Comprehensive Income in Accounting Standards Update

F-14

Table of Contents

No. 2011-05 (ASU 2011-12) to defer the new requirement to present components of reclassifications of other comprehensive income on the face of the financial statements. Companies were still required to adopt the other requirements contained in ASU 2011-05. U. S. Steel adopted ASU 2011-05 and has provided the required disclosures in a separate statement immediately following the Consolidated Statement of Operations.

On May 12, 2011, the FASB issued Accounting Standards Update No. 2011-04, Fair Value Measurement (Topic 820): Amendments to Achieve Common Fair Value Measurement and Disclosure Requirements in U.S. GAAP and IFRSs (ASU 2011-04). The amendments in ASU 2011-04 change the wording used to describe many of the requirements in accounting standards generally accepted in the United States (U.S. GAAP) for measuring fair value and for disclosing information about fair value measurements. The amendments are intended to create comparability of fair value measurements presented and disclosed in financial statements prepared in accordance with U.S. GAAP and International Financial Reporting Standards. ASU 2011-04 was effective for interim and annual periods beginning after December 15, 2011. The adoption of this ASU did not have a significant impact on U. S. Steel’s financial statements.

3. Segment Information

U. S. Steel has three reportable segments: Flat-rolled Products (Flat-rolled), ÁñÁ«ÊÓƵE and Tubular Products (Tubular). The results of several operating segments that do not constitute reportable segments are combined and disclosed in the Other Businesses category.

The Flat-rolled segment includes the operating results of U. S. Steel’s North American integrated steel plants and equity investees involved in the production of slabs, rounds, strip mill plates, sheets, tin mill products as well as all iron ore and coke production facilities in the United States and Canada. These operations primarily serve North American customers in the service center, conversion, transportation (including automotive), construction, container, appliance and electrical markets. Flat-rolled supplies steel rounds and hot-rolled bands to Tubular.

The ÁñÁ«ÊÓƵE segment includes the operating results of ÁñÁ«ÊÓƵK, U. S. Steel’s integrated steel plant and coke production facilities in Slovakia. Prior to January 31, 2012, the ÁñÁ«ÊÓƵE segment also included the operating results of U. S. Steel Serbia (ÁñÁ«ÊÓƵS), U. S. Steel’s integrated steel facility and other facilities in Serbia, and an equity investee, which were sold on January 31, 2012 (see Note 4). ÁñÁ«ÊÓƵE primarily serves customers in the European construction, service center, conversion, container, transportation (including automotive), appliance and electrical, and oil, gas and petrochemical markets. ÁñÁ«ÊÓƵE produces and sells slabs, sheet, strip mill plate, tin mill products and spiral welded pipe, as well as heating radiators and refractory ceramic materials.

The Tubular segment includes the operating results of U. S. Steel’s tubular production facilities, primarily in the United States, and equity investees in the United States and Brazil. These operations produce and sell seamless and electric resistance welded (ERW) steel casing and tubing (commonly known as oil country tubular goods or OCTG), standard and line pipe and mechanical tubing and primarily serve customers in the oil, gas and petrochemical markets.

Other Businesses includes railroad services and real estate operations.

The chief operating decision maker evaluates performance and determines resource allocations based on a number of factors, the primary measure being income (loss) from operations. Income (loss) from operations for reportable segments and Other Businesses does not include net interest and other financial costs, income taxes, postretirement benefit expenses (other than service cost and amortization of prior service cost for active employees) and certain other items that management believes are not indicative of future results. Information on segment assets is not disclosed, as it is not reviewed by the chief operating decision maker.

The accounting principles applied at the operating segment level in determining income from operations are generally the same as those applied at the consolidated financial statement level. The transfer value for steel rounds from Flat-rolled to Tubular is based on cost. All other intersegment sales and transfers are accounted for at market-based prices and are eliminated at the corporate consolidation level. Corporate selling, general and administrative expenses and costs related to certain former businesses are allocated to the reportable segments and Other Businesses based on measures of activity that management believes are reasonable.


F-15

Table of Contents

The results of segment operations are as follows:

(In millions)
 
Customer
Sales
 
Intersegment
Sales
 
Net
Sales
 
Income
(loss)
from
investees
 
Income
(loss)
from
operations
 
Depreciation,
depletion &
amortization
 
Capital
expenditures
2013
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Flat-rolled
 
$
11,572

 
$
1,258

 
$
12,830

 
$
69

 
$
105

 
$
512

 
$
349

ÁñÁ«ÊÓƵE
 
2,941

 
3

 
2,944

 

 
28

 
95

 
40

Tubular
 
2,772

 
5

 
2,777

 
(25
)
 
190

 
62

 
69

Total reportable segments
 
17,285

 
1,266

 
18,551

 
44

 
323

 
669

 
458

Other Businesses
 
139

 
134

 
273

 
(4
)
 
77

 
15

 
19

Reconciling Items and Eliminations
 

 
(1,400
)
 
(1,400
)
 

 
(2,300
)
 

 

Total
 
$
17,424

 
$

 
$
17,424

 
$
40

 
$
(1,900
)
 
$
684

 
$
477

2012
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Flat-rolled
 
$
12,908

 
$
1,647

 
$
14,555

 
$
152

 
$
400

 
$
491

 
$
625

ÁñÁ«ÊÓƵE
 
2,949

 
145

 
3,094

 

 
34

 
102

 
38

Tubular
 
3,283

 
8

 
3,291

 
(6
)
 
366

 
58

 
42

Total reportable segments
 
19,140

 
1,800

 
20,940

 
146

 
800

 
651

 
705

Other Businesses
 
188

 
139

 
327

 
(2
)
 
55

 
10

 
18

Reconciling Items and Eliminations
 

 
(1,939
)
 
(1,939
)
 

 
(608
)
 

 

Total
 
$
19,328

 
$

 
$
19,328

 
$
144

 
$
247

 
$
661

 
$
723

2011
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Flat-rolled
 
$
12,367

 
$
1,360

 
$
13,727

 
$
98

 
$
469

 
$
485

 
$
616

ÁñÁ«ÊÓƵE
 
4,306

 
69

 
4,375

 
1

 
(162
)
 
140

 
109

Tubular
 
3,034

 
7

 
3,041

 
(14
)
 
316

 
44

 
104

Total reportable segments
 
19,707

 
1,436

 
21,143

 
85

 
623

 
669

 
829

Other Businesses
 
177

 
345

 
522

 

 
46

 
12

 
19

Reconciling Items and Eliminations
 

 
(1,781
)
 
(1,781
)
 

 
(404
)
 

 

Total
 
$
19,884

 
$

 
$
19,884

 
$
85

 
$
265

 
$
681

 
$
848


The following is a schedule of reconciling items to income (loss) from operations:

(In millions)
 
2013
 
2012
 
2011
Items not allocated to segments:
 
 
 
 
 
 
Postretirement benefit expense(a)
 
$
(221
)
 
$
(297
)
 
$
(386
)
Other items not allocated to segments:
 
 
 
 
 
 
Impairment of goodwill (Note11)
 
(1,806
)
 
$

 
$

Restructuring and other charges (Note 23)
 
(248
)
 

 

Environmental remediation charge
 
(32
)
 

 
(18
)
Write-off of equity investment (Note 9)
 
(16
)
 

 

Supplier contract dispute settlement
 
23

 
15

 

Net loss on the sale of assets (Note 4)
 

 
(310
)
 

Labor agreement lump sum payments (Note 15)
 

 
(35
)
 

Property tax settlements
 

 
19

 

Total other items not allocated to segments
 
(2,079
)
 
(311
)
 
(18
)
Total reconciling items
 
$
(2,300
)
 
$
(608
)
 
$
(404
)
(a)
Consists of the net periodic benefit cost elements, other than service cost and amortization of prior service cost for active employees, associated with our pension, retiree health care and life insurance benefit plans.


F-16

Table of Contents

Net Sales by Product:
The following summarizes net sales by product:

(In millions)
 
2013
 
2012
 
2011
Flat-rolled
 
$
13,508

 
$
14,721

 
$
15,861

Tubular
 
2,826

 
3,246

 
2,986

Other(a)
 
1,090

 
1,361

 
1,037

Total
 
$
17,424

 
$
19,328

 
$
19,884

(a)
Primarily includes sales of steel production by-products, railroad services and real estate operations.

Geographic Area:
The information below summarizes net sales, property, plant and equipment and equity method investments based on the location of the operating segment to which they relate.

(In millions)
 
Year
 
Net
Sales
 
Assets
 
North America
 
2013
 
$
14,484

 
$
5,425

(a) 
 
 
2012
 
$
16,379

 
$
5,907

(a) 
 
 
2011
 
$
15,578

 
$
5,869

(a) 
Europe
 
2013
 
2,940

 
1,022

(b) 
 
 
2012
 
2,949

 
1,034

(b) 
 
 
2011
 
4,306

 
1,321

(b) 
Other Foreign Countries
 
2013
 

 
33

 
 
 
2012
 

 
37

 
 
 
2011
 

 
40

 
Total
 
2013
 
$
17,424

 
$
6,480

 
 
 
2012
 
$
19,328

 
$
6,978

 
 
 
2011
 
$
19,884

 
$
7,230

 
(a)
Assets with a book value of $4,443 million, $4,523 million and $4,424 million were located in the United States at December 31, 2013, 2012 and 2011, respectively.
(b)
Assets with a book value of $1,022 million, $1,034 million and $1,064 million were located in Slovakia at December 31, 2013, 2012 and 2011, respectively.

4. Dispositions and Assets Held for Sale

Birmingham Southern Railroad Company

On February 1, 2012, U. S. Steel completed the sale of the majority of operating assets of Birmingham Southern Railroad Company and the Port Birmingham Terminal. As a result of the transaction, U. S. Steel recognized a pretax gain of $89 million.

U. S. Steel Serbia

On January 31, 2012, U. S. Steel sold ÁñÁ«ÊÓƵS to the Republic of Serbia for a purchase price of one dollar. In addition, ÁñÁ«ÊÓƵK received $40 million for certain intercompany balances owed by ÁñÁ«ÊÓƵS for raw materials and support services. As a result of this transaction, U. S. Steel recorded a non-cash pretax charge of $399 million.













F-17

Table of Contents

5. Net Interest and Other Financial Costs

(In millions)
 
2013
 
2012
 
2011
Interest income:
 
 
 
 
 
 
Interest income
 
$
(3
)
 
$
(7
)
 
$
(6
)
Interest expense and other financial costs:
 
 
 
 
 
 
Interest incurred(a)
 
285

 
255

 
229

Less interest capitalized
 
19

 
41

 
39

Total interest expense
 
266

 
214

 
190

Foreign currency net loss (b)
 
11

 
7

 
27

Financial costs on:
 
 
 
 
 
 
Sale of receivables
 
3

 
4

 
4

Amended Credit Agreement
 
4

 
4

 
5

ÁñÁ«ÊÓƵK credit facilities
 
3

 
3

 
2

     Other (c)
 
28

 

 

Amortization of discounts and deferred financing costs
 
20

 
16

 
16

Total other financial costs
 
69

 
34

 
54

Net interest and other financial costs
 
$
332

 
$
241

 
$
238

(a) 
Includes a pretax charge of $34 million during 2013 related to premiums on the repurchase of $542 million of our 4.00% Senior Convertible Notes.
(b) 
The functional currency for ÁñÁ«ÊÓƵE is the euro and the functional currency for ÁñÁ«ÊÓƵC is the Canadian dollar. Foreign currency net loss is a result of transactions denominated in currencies other than the euro or Canadian dollar. Additionally, foreign currency net loss includes the impacts of the remeasurement of a U.S. dollar-denominated intercompany loan to a European subsidiary and the impacts of euro-U.S. dollar derivatives activity. Effective January 1, 2012, the functional currency of the European entity was changed from the euro to the U.S. dollar because of significant changes in economic facts and circumstances, including the sale of U. S. Steel Serbia. The change in functional currency has been applied on a prospective basis since January 1, 2012.
(c) 
Consists primarily of a charge of $22 million in 2013 related to a guarantee of an unconsolidated equity investment for which payment by U. S. Steel is probable (see Note 24).

6. Income and Dividends Per Common Share

Net Loss per Share Attributable to ÁñÁ«ÊÓƵ Shareholders
Basic net loss per common share is based on the weighted average number of common shares outstanding during the period.
Diluted earnings per common share assumes the exercise of stock options, the vesting of restricted stock units and performance awards and the conversion of convertible notes, provided in each case the effect is dilutive. The “if-converted” method is used to calculate the dilutive effect of the Senior Convertible Notes due in 2014 and the “treasury stock” method is used to calculate the dilutive effect of the Senior Convertible Notes due in 2019 (due to our current intent and policy, among other factors, to settle the principal amount of the 2019 Senior Convertible Notes in cash upon conversion).


(Dollars in millions, except per share amounts)
 
2013
 
2012
 
2011
Net loss attributable to ÁñÁ«ÊÓƵ shareholders
 
$
(1,672
)
 
$
(124
)
 
$
(53
)
Plus income effect of assumed conversion-interest on convertible notes
 

 

 

Net loss after assumed conversion
 
$
(1,672
)
 
$
(124
)
 
$
(53
)
Weighted-average shares outstanding (in thousands):
 
 
 
 
 
 
Basic
 
144,578

 
144,237

 
143,967

Effect of convertible notes
 

 

 

Effect of stock options, restricted stock units and performance awards
 

 

 

Adjusted weighted-average shares outstanding, diluted
 
144,578

 
144,237

 
143,967

Basic loss per common share
 
$
(11.56
)
 
(0.86
)
 
(0.37
)
Diluted loss per common share
 
$
(11.56
)
 
(0.86
)
 
(0.37
)





F-18

Table of Contents

The following table summarizes the securities that were antidilutive, and therefore, were not included in the computation of diluted loss per common share:

(In thousands)
 
2013
 
2012
 
2011
Securities granted under the 2005 Stock Incentive Plan
 
7,039

 
5,581

 
3,912

Securities convertible under the Senior Convertible Notes
 
14,017

(a) 
27,059

 
27,059

Total
 
21,056

 
32,640

 
30,971

(a) On March 27, 2013, we repurchased approximately $542 million aggregate principal amount of our 4% Senior Convertible Notes due in 2014. If the repurchases had occurred on January 1, 2013, the antidilutive securities would have been 10,058 thousand for the year ended December 31, 2013.

Dividends Paid per Share

Quarterly dividends on common stock were five cents per share for each quarter in 2013, 2012 and 2011.

7. Inventories

(In millions)
 
December 31, 2013
 
December 31, 2012
Raw materials
 
$
1,011

 
$
945

Semi-finished products
 
1,023

 
883

Finished products
 
558

 
573

Supplies and sundry items
 
96

 
102

Total
 
$
2,688

 
$
2,503


Current acquisition costs were estimated to exceed the above inventory values at December 31 by $1.0 billion in both 2013 and 2012. Cost of sales increased and income from operations decreased by $9 million during 2013 as a result of liquidations of LIFO inventories. Cost of sales decreased and income from operations was improved by $27 million and $3 million in 2012 and 2011, respectively, as a result of liquidations of LIFO inventories.

During the years ended December 31, 2012 and 2011, we recorded lower of cost or market related charges totaling approximately $35 million and $85 million, respectively.

Inventory includes $81 million and $86 million of land held for residential/commercial development as of December 31, 2013 and 2012, respectively.

From time to time, U. S. Steel enters into coke swap agreements designed to reduce transportation costs. U. S. Steel shipped and received approximately 1,025,000 tons and 900,000 tons of coke under swap agreements during 2013 and 2012, respectively.

U. S. Steel also has entered into iron ore pellet swap agreements. U. S. Steel shipped and received approximately 3,145,000 tons and 2,855,000 tons of iron ore pellets during 2013 and 2012, respectively.

The coke and iron ore pellet swaps are recorded at cost as nonmonetary transactions. There was no income statement impact related to these swaps.

8. Income Taxes

Provisions (benefits) for income taxes

 
 
2013
 
2012
 
2011
(In millions)
 
Current
 
Deferred
 
Total
 
Current
 
Deferred
 
Total
 
Current
 
Deferred
 
Total
Federal
 
$
(210
)
 
$
(167
)
 
$
(377
)
 
$
48

 
$
61

 
$
109

 
$
148

 
$
(92
)
 
$
56

State and local
 
8

 
(50
)
 
(42
)
 
5

 
23

 
28

 
(2
)
 
15

 
13

Foreign
 
1

 
(142
)
 
(141
)
 
4

 
(10
)
 
(6
)
 
2

 
9

 
11

Total
 
$
(201
)
 
$
(359
)
 
$
(560
)
 
$
57

 
$
74

 
$
131

 
$
148

 
$
(68
)
 
$
80




F-19

Table of Contents

A reconciliation of the federal statutory tax rate of 35 percent to total provisions follows:
(In millions)
 
2013
 
2012
 
2011
Statutory rate applied to income (loss) before income taxes
 
$
(781
)
 
$
2

 
$
9

Effects of foreign operations
 
467

 
266

 
184

Worthless stock loss and bad debt deduction
 
(417
)
 

 

Goodwill impairment
 
410

 

 

Tax accounting benefit related to increase in OCI
 
(142
)
 

 

Excess percentage depletion
 
(94
)
 
(107
)
 
(102
)
State and local income taxes after federal income tax effects
 
(27
)
 
18

 
8

Adjustments of prior years’ federal income taxes
 
9

 
(46
)
 
(11
)
Tax credits
 
(3
)
 

 
(3
)
Deduction for domestic production activities
 
12

 
(7
)
 
(8
)
Medicare Part D drug program subsidies
 

 
(1
)
 
(6
)
Other
 
6

 
6

 
9

Total (benefit) provision
 
$
(560
)
 
$
131

 
$
80


The tax benefit differs from the domestic statutory rate of 35 percent because of the items listed above, and in particular because it does not reflect any tax benefit for pretax losses in Canada and Serbia (ÁñÁ«ÊÓƵS was sold on January 31, 2012), which are jurisdictions where we have, or had, recorded full valuation allowances on deferred tax assets, and also does not reflect any tax provision or benefit for certain foreign currency remeasurement gains and losses that are not recognized in any tax jurisdiction. The tax benefit also differs from the domestic statutory rate of 35 percent due to tax accounting impacts related to items reported in other comprehensive income.

U. S. Steel will make an election effective December 31, 2013 to liquidate for U.S. income tax purposes a foreign subsidiary that holds most of our international operations. The election will allow us to take a worthless stock loss and bad debt deduction in our 2013 U.S. income tax return for the excess of our investment in the subsidiary over the value of its assets. As a result, the Company recorded a tax benefit of $392 million in the fourth quarter, which includes a $22 million tax benefit that offsets taxes in the same amount charged against other comprehensive income for current year translation adjustments involving ÁñÁ«ÊÓƵK. The tax benefit includes a $66 million reduction in U.S. income taxes payable for 2013, as well as a refund of $176 million expected in 2014 from the carryback of 2013 losses to prior years. The remaining $150 million benefit is expected to offset U.S. income taxes in future years. The election to liquidate the foreign subsidiary for U.S. income tax purposes will result in ÁñÁ«ÊÓƵK’s income being subject to U.S. income taxes, less any applicable credit for Slovak income taxes paid, effective December 31, 2013.

For 2013, there was essentially no tax benefit recorded on the $1.8 billion goodwill impairment charge. Included in the 2013 tax benefit is a favorable catch-up adjustment in the fourth quarter of $33 million primarily related to a decrease in forecasted income as well as a discrete tax benefit of $13 million to adjust state deferred taxes. In addition, the 2013 adjustment of prior years' federal income taxes included a charge of approximately $19 million recorded in the fourth quarter to adjust deferred taxes for prior years' differences between the financial statement carrying amounts of assets and liabilities and their tax bases for U.S. federal income tax purposes. For 2012, no significant tax benefit was recorded on the $399 million loss on the sale of ÁñÁ«ÊÓƵS. Also included in the 2012 income tax provision is a tax benefit of $20 million relating to adjustments to tax reserves related to the conclusion of certain audits as well as a tax benefit of $26 million to adjust our estimated 2011 federal tax liability to our actual tax liability reflected in our tax return as filed.

Income tax receivable
The income tax receivable of $185 million at December 31, 2013 primarily reflects the federal income tax refund of $176 million that we expect to receive in 2014 as a result of carrying back our 2013 net operating loss to prior years.

Unrecognized tax benefits
Unrecognized tax benefits are the differences between a tax position taken, or expected to be taken, in a tax return and the benefit recognized for accounting purposes pursuant to the guidance in ASC Topic 740 on income taxes. The total amount of unrecognized tax benefits was $127 million, $85 million and $110 million as of December 31, 2013, 2012 and 2011, respectively.


F-20

Table of Contents

The total amount of unrecognized tax benefits that, if recognized, would affect the effective tax rate was $69 million as of December 31, 2013.

U. S. Steel records interest related to uncertain tax positions as a part of net interest and other financial costs in the Statement of Operations. Any penalties are recognized as part of selling, general and administrative expenses. As of December 31, 2013, 2012 and 2011, U. S. Steel had accrued liabilities of $7 million, $7 million and $6 million, respectively, for interest related to unrecognized tax benefits. U. S. Steel currently does not have a liability for tax penalties.

A tabular reconciliation of unrecognized tax benefits follows:

(In millions)
 
2013
 
2012
 
2011
Unrecognized tax benefits, beginning of year
 
$
85

 
$
110

 
$
115

Increases – tax positions taken in prior years
 
1

 
3

 
1

Decreases – tax positions taken in prior years
 
(6
)
 
(25
)
 
(4
)
Increases – current tax positions
 
70

 
2

 
3

Settlements
 

 
(5
)
 

Lapse of statute of limitations
 
(23
)
 

 
(5
)
Unrecognized tax benefits, end of year
 
$
127

 
$
85

 
$
110

It is reasonably expected that during the next 12 months unrecognized tax benefits related to income tax issues will decrease by approximately $9 million.

Tax years subject to examination
Below is a summary of the tax years open to examination by major tax jurisdiction:

U.S. Federal – 2008 and forward*
U.S. States – 2007 and forward
Slovakia – 2003 and forward
Canada Federal and Provincial – 2009 and forward

*U. S. Steel’s 2008 and 2009 federal tax years remain open to the extent of net operating losses carried back from 2010.

Status of Internal Revenue Service (IRS) examinations
The IRS audit of U. S. Steel’s 2010 and 2011 tax returns began in 2012 and is ongoing. The IRS audit of the 2008 and 2009 tax returns was completed and agreed to in 2012.

Taxes on foreign income
Pretax loss and income for 2013, 2012 and 2011 includes domestic (loss)/income of $(899) million, $782 million and $519 million, respectively and losses attributable to foreign sources of $(1,333) million, $(776) million and $(492) million, respectively. Undistributed earnings and profits for U.S. federal income tax purposes of certain consolidated foreign subsidiaries, which includes intercompany interest, amounted to approximately $830 million at December 31, 2013 compared to $2.7 billion at the end of 2012. If such tax earnings and profits were not indefinitely reinvested, a U.S. deferred tax liability of approximately $280 million would have been required. The decrease in tax earnings and profits is mainly attributable to an election effective December 31, 2013 to liquidate for U.S. income tax purposes a foreign subsidiary that holds most of our international operations.


F-21

Table of Contents

Deferred taxes
Deferred tax assets and liabilities resulted from the following:

 
 
December 31,
(In millions)
 
2013
 
2012
Deferred tax assets:
 
 
 
 
Federal tax loss carryforwards (expiring in 2033)
 
$
386

 
$

State tax credit carryforwards (expiring in 2027)
 
7

 
2

State tax loss carryforwards (expiring in 2015 through 2033)
 
37

 
35

Minimum tax credit carryforwards
 
108

 
157

General business credit carryforwards
 
69

 
66

Foreign tax loss and credit carryforwards (expiring in 2014 through 2033)
 
713

 
637

Employee benefits
 
908

 
1,704

Receivables, payables and debt
 
88

 
89

Expected federal benefit for deducting state deferred income taxes
 
32

 
51

Inventory
 
107

 

Contingencies and accrued liabilities
 
119

 
133

Valuation allowances:
 
 
 
 
Foreign
 
(1,028
)
 
(1,099
)
Total deferred tax assets
 
1,546

 
1,775

Deferred tax liabilities:
 
 
 
 
Property, plant and equipment
 
1,205

 
1,041

Investments in subsidiaries and equity investees
 
50

 
97

Inventory
 

 
1

Future reduction of foreign tax credits
 
49

 

Other temporary differences
 
95

 
41

Total deferred tax liabilities
 
1,399

 
1,180

Net deferred tax asset
 
$
147

 
$
595


At December 31, 2013 and 2012, the net domestic deferred tax asset was $88 million and $538 million, respectively. A substantial amount of U. S. Steel’s domestic deferred tax assets relate to employee benefits that will become deductible for tax purposes over an extended period of time as cash contributions are made to employee benefit plans and retiree benefits are paid in the future. We continue to believe it is more likely than not that the net domestic deferred tax asset will be realized.

At December 31, 2013 and 2012, the net foreign deferred tax asset was $59 million and $57 million, respectively, net of established valuation allowances of $1,028 million and $1,099 million, respectively. The net foreign deferred tax asset will fluctuate as the value of the U.S. dollar changes with respect to the euro and the Canadian dollar. At December 31, 2013 and 2012, a full valuation allowance was recorded for the net Canadian deferred tax asset primarily due to cumulative losses in Canada.

If evidence changes and it becomes more likely than not that the Company will realize the net Canadian deferred tax asset, the valuation allowance would be partially or fully reversed. Any reversal of this amount would result in a decrease to income tax expense. The Slovak income tax rate will decrease from 23% to 22% starting in 2014. This change had an insignificant impact on deferred taxes at the end of 2013.


9. Investments and Long-Term Receivables
 
 
December 31,
(In millions)
 
2013
 
2012
Equity method investments
 
$
558

 
$
570

Receivables due after one year, less allowance of $3 for both periods
 
58

 
34

Other
 
5

 
5

Total
 
$
621

 
$
609



F-22

Table of Contents

Summarized financial information of all investees accounted for by the equity method of accounting is as follows (amounts represent 100% of investee financial information):
(In millions)
 
2013
 
2012
 
2011
Income data – year ended December 31:
 
 
 
 
 
 
Net Sales
 
$
3,735

 
$
4,019

 
$
3,514

Operating income
 
449

 
650

 
319

Net income
 
413

 
602

 
264

Balance sheet date – December 31:
 
 
 
 
 
 
Current Assets
 
$
912

 
$
1,028

 
 
Noncurrent Assets
 
1,876

 
1,981

 
 
Current liabilities
 
677

 
569

 
 
Noncurrent Liabilities
 
852

 
1,220

 
 

U. S. Steel's portion of the equity in net income for its equity investments as reported in the income from investees line on the Consolidated Statement of Operations was $40 million, $144 million and $85 million for the years ended December 31, 2013, 2012 and 2011, respectively.

Investees accounted for using the equity method include:
Investee
Country
December 31, 2013
Interest
Acero Prime, S. R. L. de CV
Mexico
40
%
Apolo Tubulars S.A.
Brazil
50
%
Baycoat Limited Partnership
Canada
50
%
Baycoat Limited
Canada
50
%
Chrome Deposit Corporation
United States
50
%
Daniel Ross Bridge, LLC
United States
50
%
D.C. Chrome Limited
Canada
50
%
Double Eagle Steel Coating Company
United States
50
%
Double G Coatings Company L.P.
United States
50
%
Feralloy Processing Company
United States
49
%
Hibbing Development Company
United States
24.1
%
Hibbing Taconite Company(a)
United States
14.7
%
Leeds Retail Center, LLC
United States
38
%
Patriot Premium Threading Services
United States
50
%
PRO-TEC Coating Company
United States
50
%
Strategic Investment Fund Partners I(b)
United States
8.6
%
Strategic Investment Fund Partners II(b)
United States
4.9
%
Swan Point Development Company, Inc.
United States
50
%
Tilden Mining Company, L.C.(a)
United States
15
%
United Spiral Pipe, LLC
United States
35
%
ÁñÁ«ÊÓƵ-POSCO Industries
United States
50
%
Worthington Specialty Processing
United States
49
%
(a)
Hibbing Taconite Company (HTC) is an unincorporated joint venture that is owned, in part, by Hibbing Development Company (HDC), which is accounted for using the equity method. Through HDC we are able to influence the activities of HTC, and as such, its activities are accounted for using the equity method.
Tilden Mining Company, L.C. is a limited liability company and in accordance with ASC Topic 323 “Partnerships and Unincorporated Joint Ventures,” (ASC Topic 323) its financial activities are accounted for using the equity method.
(b)
Strategic Investment Fund Partners I and II are limited partnerships and in accordance with ASC Topic 323, the financial activities are accounted for using the equity method.

Dividends and partnership distributions received from equity investees were $13 million in 2013, $98 million in 2012 and $31 million in 2011.

During 2013, U. S. Steel recognized a non-cash charge of $16 million to write its investment in United Spiral Pipe, LLC (USP) down to zero. Additionally, we recorded a $6 million non-cash charge to write-off an interest receivable due from USP.


F-23

Table of Contents

We supply substrate to certain of our equity method investees and from time to time will extend the payment terms for their trade receivables. For discussion of transactions and related receivable and payable balances between U. S. Steel and its investees, see Note 21.

10. Property, Plant and Equipment

 
 
 
 
December 31,
(In millions)
 
Useful Lives
 
2013
 
2012
Land and depletable property
 

 
$
251

 
$
264

Buildings
 
35 years

 
1,367

 
1,394

Machinery and equipment
 
4-22 years

 
14,386

 
14,408

Information technology
 
5-6 years

 
758

 
709

Assets under capital lease
 
2-25 years

 
37

 
131

Total
 
 
 
16,799

 
16,906

Less accumulated depreciation and depletion
 
 
 
10,877

 
10,498

Net
 
 
 
$
5,922

 
$
6,408


Amounts in accumulated depreciation and depletion for assets acquired under capital leases (including sale-leasebacks accounted for as financings) were $5 million and $95 million at December 31, 2013 and 2012, respectively.

11. Goodwill and Intangible Assets

The changes in the carrying amount of goodwill by segment for the years ended December 31, 2013 and December 31, 2012 are as follows:

 
 
Flat-rolled
Segment
 
ÁñÁ«ÊÓƵE
Segment
 
Tubular
Segment
 
Total
Balance at January 1, 2012
 
$
945

 
$
4

 
$
834

 
$
1,783

Currency translation
 
39

 

 

 
39

Balance at December 31, 2012
 
$
984

 
$
4

 
$
834

 
$
1,822

Goodwill from acquisitions
 

 

 
3

 
3

Impairment
 
(969
)
 

 
(837
)
 
(1,806
)
Currency translation
 
(15
)
 

 

 
(15
)
Balance at December 31, 2013
 
$

 
$
4

 
$

 
$
4


Goodwill represents the excess of the cost over the fair value of acquired identifiable tangible and intangible assets and liabilities assumed from businesses acquired.
Goodwill is tested for impairment at the reporting unit level annually in the third quarter and whenever events or circumstances indicate the carrying value may not be recoverable. The evaluation of goodwill impairment involves using either a qualitative or quantitative approach as outlined in ASC Topic 350. U. S. Steel completed its annual goodwill impairment evaluation using the two-step quantitative analysis during the third quarter of 2013. We had two reporting units that included nearly all of our goodwill: our Flat-rolled reporting unit and our Texas Operations reporting unit, which is part of our Tubular operating segment.

In the first step of the analysis, U. S. Steel compared the estimated fair value of each reporting unit to its carrying value, including goodwill. The fair value of the reporting units was determined based on a weighting of income and market approaches. Since the carrying value of both the Flat-rolled and Texas Operations reporting units exceeded the fair value, U. S. Steel performed the second step of the impairment analysis in order to determine the implied fair value of the reporting units goodwill. The implied fair value of goodwill represents the excess of fair value of the reporting unit over the fair value amounts assigned to all of the assets and liabilities of the reporting unit as if it were to be acquired in a business combination and the current fair value of the reporting unit (as calculated in the first step) was the purchase price. Any amount remaining after this allocation represents the implied fair value of goodwill. The implied fair value of the respective reporting units goodwill was then compared to the carrying value of the goodwill and any excess of carrying value over the implied fair value

F-24

Table of Contents

represents the non-cash impairment charge. The results of the second step analysis showed that the implied fair value of goodwill was zero for both reporting units. Therefore, in 2013, U. S. Steel recorded a goodwill impairment charge of $969 million and $837 million for the Flat-rolled and Texas Operations reporting units, respectively. As a result of the goodwill impairment charge, there is no goodwill remaining within the Flat-rolled and Tubular segments, and goodwill remaining on our consolidated balance sheet at December 31, 2013 is $4 million.

The impairment of the Flat-rolled reporting unit’s goodwill was primarily driven by the valuation effects of the protracted economic recovery and excess global steelmaking capacity. The impairment of the Texas Operations reporting unit’s goodwill was primarily driven by the adverse price and volume effects of an increased supply of welded tubular products in the U.S. market from the continued high level of tubular product imports and announced additional domestic tubular manufacturing capacity. Due to these factors, U. S. Steel decreased the long term estimates of its operating results and cash flows utilized in assessing goodwill for impairment. The valuation of goodwill for the second step of the goodwill impairment analysis is considered a Level 3 fair value measurement, which means that the valuation of the assets and liabilities reflect U. S. Steel's own assumptions about the assumptions that market participants would use in pricing the assets and liabilities.
The valuation methodologies used for the 2013 impairment analysis to determine fair value under step one, with the assistance of a third party valuation specialist in the case of the Texas Operations reporting unit, were a market approach and an income approach.

For purposes of the income approach, fair value was determined based on the present value of estimated future cash flows, discounted at an appropriate risk-adjusted rate (DCF analysis). U. S. Steel made assumptions about the amount and timing of future expected cash flows, terminal value growth rates and appropriate discount rates. The amount and timing of future cash flows within U. S. Steel’s DCF analysis was based on its most recent operational budgets, long range strategic plans and other estimates including probability weighting of cash flow scenarios. A three percent perpetual growth rate was used to calculate the value of cash flows beyond the last projected period in U. S. Steel’s DCF analysis and reflects its best estimates for stable, perpetual growth of its reporting units. Actual results may differ from those assumed in U. S. Steel’s forecasts. U. S. Steel used estimates of market participant weighted average cost of capital as a basis for determining the discount rates applied to its reporting units’ future expected cash flows, adjusted for risks and uncertainties inherent in the steel industry and in its internally developed forecasts. A discount rate of 10 percent was used for both reporting units.
The market approach is based upon an analysis of valuation metrics for companies comparable to each reporting unit. Fair values for the Flat-rolled and Texas Operations reporting units were estimated using an appropriate valuation multiple, as well as estimated normalized earnings and an estimated control premium.
In order to validate the reasonableness of the estimated fair values of the reporting units as of the valuation date, a reconciliation of the aggregate fair values of all reporting units to market capitalization was performed using a reasonable control premium. We further validated the reasonableness of the estimated fair values of our reporting units using other valuation metrics that included data from U. S Steel's historical transactions as well as published industry analyst reports.
Goodwill impairment tests in prior years indicated that goodwill was not impaired for any of U. S. Steel's reporting units and there were no triggering events since that time that necessitated an impairment test outside of the normal annual assessment.

Amortizable intangible assets are amortized on a straight-line basis over their estimated useful lives and are detailed below:

 
 
 
 
As of December 31, 2013
 
As of December 31, 2012
(In millions)
 
Useful
Lives
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Net
Amount
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Net
Amount
Customer relationships
 
22-23 Years
 
$
215

 
$
63

 
$
152

 
$
221

 
$
54

 
$
167

Other
 
2-20 Years
 
23

 
12

 
11

 
22

 
11

 
11

Total amortizable intangible assets
 
 
 
$
238

 
$
75

 
$
163

 
$
243

 
$
65

 
$
178



F-25

Table of Contents

The carrying amount of acquired water rights with indefinite lives as of December 31, 2013 and December 31, 2012 totaled $75 million. The water rights are tested for impairment annually in the third quarter. U. S. Steel performed a qualitative impairment evaluation of its water rights for 2013. The 2013 and prior year tests indicated the water rights were not impaired.
During the year ended December 31, 2013, U. S. Steel acquired indefinite-lived intangible assets for $12 million and entered into an agreement to make future payments contingent upon certain factors. The aggregate purchase price was $36 million, and U. S. Steel allocated $33 million to indefinite-lived intangible assets, based upon their estimated fair value. The liability for contingent consideration will be reassessed each quarter. The maximum potential liability for contingent consideration is $53 million. As of December 31, 2013, U. S. Steel has recorded a liability of $24 million to reflect the estimated fair value of the contingent consideration. Contingent consideration was valued using a probability weighted discounted cash flow using both Level 2 inputs based on 2013 Standard and Poor’s Bond Guide as well Level 3, significant other unobservable inputs, based on internal forecasts and weighted average cost of capital derived from market data.
Identifiable intangible assets with finite lives are reviewed for impairment whenever events or circumstances indicate that the carrying value may not be recoverable. During the third quarter of 2013, U. S. Steel completed a review of its identifiable intangible assets with finite lives and determined that the assets were not impaired.

Amortization expense was $10 million for the year ended December 31, 2013 and $11 million for the years ended December 31, 2012 and 2011. The estimated future amortization expense of identifiable intangible assets during the next five years is $11 million in each year from 2014 to 2017 and $10 million for 2018.

12. Stock-Based Compensation Plans

On April 26, 2005, U. S. Steel’s stockholders approved the 2005 Stock Incentive Plan (2005 Stock Plan). The aggregate number of shares of U. S. Steel common stock that may be issued through April 26, 2020 under the 2005 Stock Plan is 15,450,000 shares, of which 2,609,897 shares are available as of December 31, 2013 for future grants. Generally, a share issued under the Plan pursuant to an award other than a stock option will reduce the number of shares available under the Stock Plan by 1.64 shares. The purposes of the 2005 Stock Plan are to attract, retain and motivate employees and non-employee directors of outstanding ability, and to align their interests with those of the stockholders of U. S. Steel. The Compensation & Organization Committee of the Board of Directors administers the plan pursuant to which they may make grants of stock options, restricted stock, restricted stock units (RSUs), performance awards, and other stock-based awards. Also, shares related to awards (i) that are forfeited, (ii) that terminate without shares having been issued or (iii) for which payment is made in cash or property other than shares are again available for awards under the plan; provided, however, that shares delivered to U. S. Steel or withheld for purposes of satisfying the exercise price or tax withholding obligations shall not again be available for awards.

The following table summarizes the total stock-based compensation awards granted during the years 2013, 2012 and 2011:
 
 
Executive Stock
Options
 
Non-executive Stock
Options
 
Restricted
Stock
Units
 
Performance
Awards
2013 Grants
 
838,610

 
971,860

 
1,043,420

 
271,960

2012 Grants
 
510,570

 
993,310

 
910,011

 
328,780

2011 Grants
 
228,300

 
478,760

 
422,080

 
85,040



F-26

Table of Contents

Stock-based compensation expense
The following table summarizes the total compensation expense recognized for stock-based compensation awards:

(In millions, except per share amounts)
 
12/31/2013
 
12/31/2012
 
12/31/2011
Stock-based compensation expense recognized:
 
 
 
 
 
 
Cost of sales
 
$
10

 
$
12

 
$
10

Selling, general and administrative expenses
 
23

 
26

 
23

Total
 
33

 
38

 
33

Related deferred income tax benefit
 
12

 
14

 
12

Decrease in net income
 
$
21

 
$
24

 
$
21

Decrease in basic earnings per share
 
0.14

 
0.16

 
0.14

Decrease in diluted earnings per share
 
0.14

 
0.16

 
0.14


As of December 31, 2013, total future compensation cost related to nonvested stock-based compensation arrangements was $35 million, and the average period over which this cost is expected to be recognized is approximately 12 months.

Stock options
Compensation expense for stock options is recorded over the vesting period based on the fair value on the date of grant, as calculated by U. S. Steel using the Black-Scholes model and the assumptions listed below. The 2013, 2012 and 2011 awards vest ratably over a three-year service period and have a term of ten years. Stock options are generally issued at the market price of the underlying stock on the date of the grant. The 2013 executive grants, however, were issued at the greater of (1) the premium exercise price of $25 or (2) the market price on the grant date. Upon exercise of stock options, shares of U. S. Steel stock are issued from treasury stock.

Black-Scholes Assumptions (a)
 
2013 Executive Grants
 
2013 Non-Executive Grants
 
2012 Grants
 
2011 Grants
Grant date price per share of option award
 
$
18.62

 
$
18.64

 
$
22.28

 
$
45.81

Exercise price per share of option award
 
$
25.03

 
$
18.64

 
$
22.28

 
$
45.81

Expected annual dividends per share
 
$
0.20

 
$
0.20

 
$
0.20

 
$
0.20

Expected life in years
 
5.0

 
5.0

 
5.0

 
5.0

Expected volatility
 
66
%
 
67
%
 
68
%
 
64
%
Risk-free interest rate
 
1.3
%
 
1.0
%
 
0.8
%
 
1.8
%
Average grant date fair value per share of unvested option awards as calculated from above
 
$
8.44

 
$
9.70

 
$
11.93

 
$
24.39

(a)The assumptions represent a weighted-average for all grants during the year.

The expected annual dividends per share are based on the latest annualized dividend rate at the date of grant; the expected life in years is determined primarily from historical stock option exercise data; the expected volatility is based on the historical volatility of U. S. Steel stock; and the risk-free interest rate is based on the U.S. Treasury strip rate for the expected life of the option.


F-27

Table of Contents

The following table shows a summary of the status and activity of stock options for the year ended December 31, 2013:

 
 
Shares
 
Weighted-
Average
Exercise Price
(per share)
 
Weighted-
Average
Remaining
Contractual Term
(in years)
 
Aggregate
Intrinsic
Value
(in millions)
Outstanding at January 1, 2013
 
4,318,966

 
$
43.86

 
 
 
 
Granted
 
1,810,470

 
$
21.60

 
 
 
 
Exercised
 
(14,383
)
 
$
22.31

 
 
 
 
Forfeited or expired
 
(907,765
)
 
$
35.36

 
 
 
 
Outstanding at December 31, 2013
 
5,207,288

 
$
37.66

 
7.5
 
$
21

Exercisable at December 31, 2013
 
2,634,676

 
$
51.34

 
6.0
 
3

Exercisable and expected to vest at December 31, 2013
 
4,946,640

 
$
38.42

 
7.4
 
$
20


The aggregate intrinsic value in the table above represents the total pretax intrinsic value (difference between our closing stock price on the last trading day of 2013 and the exercise price, multiplied by the number of in-the-money options). Intrinsic value changes are a function of the fair market value of our stock.

The total intrinsic value of stock options exercised (i.e., the difference between the market price at exercise and the price paid by the employee to exercise the option) was de minimus during the years ended December 31, 2013 and 2012, and $3 million during the year ended December 31, 2011. The total amount of cash received by U. S. Steel from the exercise of options during the year ended December 31, 2013, and the related net tax benefit realized from the exercise of these options, were de minimus.

Stock awards
Compensation expense for nonvested stock awards is recorded over the vesting period based on the fair value at the date of grant.

RSUs generally vest ratably over 3 years. Their fair value is the market price of the underlying common stock on the date of grant.

Performance awards vest at the end of a three-year performance period as a function of U. S. Steel’s total shareholder return compared to the total shareholder return of a peer group of companies over the three-year performance period. Performance awards can vest at between zero and 200 percent of the target award. The fair value of the performance awards is calculated using a Monte-Carlo simulation.

The following table shows a summary of the performance awards outstanding as of December 31, 2013, and their fair market value on the respective grant date:

Performance Period
 
Fair Value
(in millions)
 
Minimum
Shares
 
Target
Shares
 
Maximum
Shares
2013 - 2016
 
$
6

 

 
271,960

 
543,920

2012 - 2015
 
$
8

 

 
328,780

 
657,560

2011 - 2014
 
$
6

 

 
85,040

 
170,080



F-28

Table of Contents

The following table shows a summary of the status and activity of nonvested stock awards for the year ended December 31, 2013:

 
 
Restricted
Stock Units
 
Performance
Awards
(a)
 
Total
 
Weighted-
Average
Grant-Date
Fair Value
Nonvested at January 1, 2013
 
1,262,198

 
503,114

 
1,765,312

 
$
31.62

Granted
 
1,043,420

 
271,960

 
1,315,380

 
19.20

Vested
 
(530,827
)
 

 
(530,827
)
 
32.58

Performance adjustment factor (b)
 

 
(89,294
)
 
(89,294
)
 
57.02

Forfeited or expired
 
(282,533
)
 
(185,804
)
 
(468,337
)
 
23.34

Nonvested at December 31, 2013
 
1,492,258

 
499,976

 
1,992,234

 
$
23.97

(a)The number of shares shown for the performance awards is based on the target number of share awards.
(b)
Consists of adjustments to vested performance awards to reflect actual performance. The adjustments were required since the original grants of the awards were at 100 percent of the targeted amounts.

The following table presents information on RSUs and performance awards granted:

 
 
2013
 
2012
 
2011
Number of awards granted
 
1,315,380

 
1,238,791

 
507,120

Weighted-average grant-date fair value per share
 
$
19.20

 
$
23.07

 
$
49.10


During the years ended December 31, 2013, 2012, and 2011, the total fair value of shares vested was $17 million, $16 million, and $15 million, respectively.

13. Derivative Instruments

U. S. Steel is exposed to foreign currency exchange rate risks as a result of our European and Canadian operations. ÁñÁ«ÊÓƵE’s revenues are primarily in euros and costs are primarily in U.S. dollars and euros. ÁñÁ«ÊÓƵC’s revenues and costs are denominated in both Canadian and U.S. dollars. In addition, foreign cash requirements have been and in the future may be funded by intercompany loans, creating intercompany monetary assets and liabilities in currencies other than the functional currency of the entities involved, which can affect income when remeasured at the end of each period.

U. S. Steel uses euro forward sales contracts with maturities no longer than 12 months to exchange euros for U.S. dollars to manage our exposure to foreign currency exchange rate fluctuations. Derivative instruments are required to be recognized at fair value in the balance sheet. U. S. Steel has not elected to designate these euro forward sales contracts as hedges. Therefore, changes in their fair value are recognized immediately in the results of operations. The gains and losses recognized on the euro forward sales contracts may also partially offset the accounting remeasurement gains and losses recognized on intercompany loans.

As of December 31, 2013, U. S. Steel held euro forward sales contracts with a total notional value of approximately $320 million. We mitigate the risk of concentration of counterparty credit risk by purchasing our forward sales contracts from several counterparties.

Additionally, U. S. Steel uses fixed-price forward physical purchase contracts to partially manage our exposure to price risk related to the purchases of natural gas and certain nonferrous metals used in the production process. During 2013, 2012 and 2011, the forward physical purchase contracts for natural gas and nonferrous metals qualified for the normal purchases and normal sales exemption in ASC Topic 815 and were not subject to mark-to-market accounting.

The following summarizes the location and amounts of the fair values related to derivatives included in U. S. Steel’s financial statements as of December 31, 2013 and 2012:

 
 
 
 
Fair Value
(In millions)
 
Balance Sheet
Location
 
December 31, 2013
 
December 31, 2012
Foreign exchange forward contracts
 
Accounts payable
 
$
11

 
$
12


F-29

Table of Contents

The following summarizes the location and amounts of the gains and losses related to derivatives included in U. S. Steel’s financial statements for the years ended December 31, 2013, 2012 and 2011:

 
 
Statement of
Operations
Location
 
Amount of Gain
(Loss)
(In millions)
 
 
Year Ended December 31, 2013
 
Year Ended December 31, 2012
 
Year Ended December 31, 2011
Foreign exchange forward contracts
 
Other financial costs
 
$
(14
)
 
$
(7
)
 
$
13


In accordance with the guidance in ASC Topic 820 on fair value measurements and disclosures, the fair value of our euro forward sales contracts was determined using Level 2 inputs, which are defined as “significant other observable” inputs. The inputs used are from market sources that aggregate data based upon market transactions.

14. Debt

 
 
 
 
 
 
December 31,
(In millions)
 
Interest
Rates %
 
Maturity
 
2013
 
2012
2037 Senior Notes
 
6.65
 
2037
 
$
350

 
$
350

2022 Senior Notes
 
7.50
 
2022
 
400

 
400

2021 Senior Notes
 
6.875
 
2021
 
275

 

2020 Senior Notes
 
7.375
 
2020
 
600

 
600

2018 Senior Notes
 
7.00
 
2018
 
500

 
500

2017 Senior Notes
 
6.05
 
2017
 
450

 
450

2019 Senior Convertible Notes
 
2.75
 
2019
 
316

 

2014 Senior Convertible Notes
 
4.00
 
2014
 
322

 
863

Province Note (C$150 million)
 
1.00
 
2015
 
141

 
151

Environmental Revenue Bonds
 
5.38 - 6.88
 
2015 - 2042
 
549

 
549

Recovery Zone Facility Bonds
 
6.75
 
2040
 
70

 
70

Fairfield Caster Lease
 
 
 
2022
 
35

 
35

Other capital leases and all other obligations
 
 
 
2014 - 2020
 

 
1

Amended Credit Agreement
 
Variable
 
2016
 

 

ÁñÁ«ÊÓƵK Revolver
 
Variable
 
2016
 

 

ÁñÁ«ÊÓƵK credit facilities
 
Variable
 
2015 - 2016
 

 

Total Debt
 
 
 
 
 
4,008

 
3,969

Less Province Note fair value adjustment
 
 
 
 
 
15

 
23

Less unamortized discount
 
 
 
 
 
54

 
8

Less short-term debt and long-term debt due within one year
 
 
 
 
 
323

 
2

Long-term debt
 
 
 
 
 
$
3,616

 
$
3,936


2021 Senior Notes
On March 26, 2013, U. S. Steel issued $275 million of 6.875% Senior Notes due April 1, 2021 (2021 Senior Notes). U. S. Steel received net proceeds from the offering of $270 million after fees of $5 million related to the underwriting discount and third party expenses. The net proceeds from the issuance of the 2021 Senior Notes, together with the net proceeds of the concurrent 2019 Senior Convertible Notes offering (see below), were used to repurchase a portion of our 4.00% Senior Convertible Notes due May 15, 2014 (2014 Senior Convertible Notes). Interest on the 2021 Senior Notes is payable semi-annually on April 1st and October 1st of each year, commencing on October 1, 2013.

F-30

Table of Contents

U. S. Steel may redeem the 2021 Senior Notes, in whole or in part, at our option at any time and from time to time on or after April 1, 2017 at the redemption price for such notes set forth below as a percentage of the principal amount, plus accrued and unpaid interest to, but excluding, the redemption date, if redeemed during the twelve-month period beginning April 1 of the years indicated below:
Year
Redemption Price
2017
103.438
%
2018
101.719
%
2019 and thereafter
100.000
%
2019 Senior Convertible Notes
On March 26, 2013, U. S. Steel issued $316 million of 2.75% Senior Convertible Notes due April 1, 2019 (2019 Senior Convertible Notes). U. S. Steel received net proceeds from the offering of $306 million after fees of $10 million related to the underwriting discount and third party expenses. The net proceeds from the issuance of the 2019 Senior Convertible Notes, together with the net proceeds of the concurrent 2021 Senior Notes offering (see above), were used to repurchase a portion of our 2014 Senior Convertible Notes. Interest on the 2019 Senior Convertible Notes is payable semi-annually on April 1st and October 1st of each year, commencing on October 1, 2013.
The initial conversion rate for the 2019 Senior Convertible Notes is 39.5491 shares of U. S. Steel common stock per $1,000 principal amount, equivalent to an initial conversion price of approximately $25.29 per share of common stock, subject to adjustment as defined in the 2019 Senior Convertible Notes. On the issuance date of the 2019 Senior Convertible Notes, the market price of U. S. Steel’s common stock was below the stated conversion price of $25.29 so there was no beneficial conversion option to the holders. Based on the initial conversion rate, the 2019 Senior Convertible Notes are convertible into 12,507,403 shares of U. S. Steel common stock and we reserved for the possible issuance of 16,259,615 shares, which is the maximum amount that could be issued upon conversion. Holders may convert their notes at their option prior to the close of business on the business day immediately preceding October 1, 2018 only under certain circumstances (as described in the 2019 Senior Convertible Notes). On or after October 1, 2018, until the close of business on the second scheduled trading day immediately preceding the maturity date, holders may convert their 2019 Senior Convertible Notes at any time. Upon conversion, we will satisfy our conversion obligation by paying or delivering, as the case may be, cash, shares of our common stock or a combination of cash and shares of our common stock at our election. Any unconverted 2019 Senior Convertible Notes mature at par on April 1, 2019.
U. S. Steel may not redeem the 2019 Senior Convertible Notes prior to April 5, 2017. On or after April 5, 2017, we may redeem for cash all or part of the 2019 Senior Convertible Notes, at our option, under certain circumstances. The redemption price will equal 100% of the principal amount of the 2019 Senior Convertible Notes to be redeemed, plus accrued and unpaid interest to, but excluding, the redemption date.
If U. S. Steel undergoes a fundamental change, as defined in the 2019 Senior Convertible Notes, holders may require us to repurchase the 2019 Senior Convertible Notes in whole or in part for cash at a price equal to 100% of the principal amount of the 2019 Senior Convertible Notes to be purchased plus any accrued and unpaid interest (including additional interest, if any) up to, but excluding the repurchase date.
Although the 2019 Senior Convertible Notes were issued at par, for accounting purposes the proceeds received from the issuance of the notes are allocated between debt and equity to reflect the fair value of the conversion option embedded in the notes and the fair value of similar debt without the conversion option. As a result, $53 million of the gross proceeds of the 2019 Senior Convertible Notes was recorded as an increase in additional paid-in capital with the offsetting amount recorded as a debt discount. The debt discount will be amortized over the term of the 2019 Senior Convertible Notes using an interest rate of 6.2% (the estimated effective borrowing rate for nonconvertible debt at the time of issuance) which will accrete the carrying value of the notes to the principal amount at maturity. As of December 31, 2013, the remaining unamortized debt discount was $47 million and the net carrying amount of the 2019 Senior Convertible Notes was $269 million.
Similar to our other senior notes, the 2019 Senior Convertible Notes and the 2021 Senior Notes contain covenants limiting our ability to create liens, to enter into sale-leaseback transactions and to consolidate, merge or transfer all, or substantially all of our assets. They also contain provisions requiring the purchase of the notes upon a change in control under certain specified circumstances, as well as other customary provisions. In addition, certain payment defaults on other indebtedness are a default under the 2019 Senior Convertible Notes.

F-31

Table of Contents

Issuance of Senior Notes due 2022
On March 15, 2012, U. S. Steel issued $400 million of 7.50% Senior Notes due March 15, 2022 (2022 Senior Notes). U. S. Steel received net proceeds from the offering of $392 million after fees of $8 million related to the underwriting discount and third party expenses. The majority of the net proceeds from the issuance of the 2022 Senior Notes was used in April 2012 to redeem all of our $300 million of 5.65% Senior Notes due June 1, 2013.

The 2022 Senior Notes are senior and unsecured obligations that rank equally in right of payment with all of our other existing and future senior indebtedness. U. S. Steel will pay interest on the notes semi-annually in arrears on March 15th and September 15th of each year. The 2022 Senior Notes were issued under U. S. Steel’s shelf registration statement and are not listed on any national securities exchange.

Similar to our other senior notes, the 2022 Senior Notes restrict our ability to create certain liens, to enter into sale leaseback transactions and to consolidate, merge, transfer or sell all, or substantially all of our assets. They also contain provisions requiring the purchase of the 2022 Senior Notes upon a change of control under certain specified circumstances, as well as other customary provisions.

U. S. Steel may redeem the 2022 Senior Notes, in whole or in part, at our option at any time or from time to time on or after March 15, 2017 at the redemption price for such notes set forth below as a percentage of the principal amount, plus accrued and unpaid interest to, but excluding, the redemption date, if redeemed during the twelve-month period beginning March 15 of the years indicated below:

Year
Redemption Price
2017
103.75
%
2018
102.50
%
2019
101.25
%
2020 and thereafter
100.00
%

Senior Notes
On March 16, 2010, U. S. Steel issued $600 million of 7.375 percent Senior Notes due 2020 (2020 Senior Notes). The 2020 Senior Notes were issued at 99.125 percent of their principal amount. U. S. Steel received net proceeds of $582 million after fees of $13 million for the underwriting discount and third party expenses. Interest is payable semi-annually on April 1st and October 1st of each year. The 2020 Senior Notes are not listed on any national securities exchange. The 2020 Senior Notes contain covenants limiting our ability to create liens, to enter into sale-leaseback transactions and to consolidate, merge or transfer all, or substantially all of our assets. They also contain provisions requiring the purchase of the 2020 Notes upon a change of control under certain specified circumstances, as well as other customary provisions.

On December 10, 2007, U. S. Steel issued $500 million of 7.00 percent Senior Notes due 2018 (2018 Senior Notes). Interest is payable semi-annually on February 1st and August 1st of each year. The 2018 Senior Notes are not listed on any national securities exchange. The 2018 Senior Notes contain covenants limiting our ability to create liens, to enter into sale-leaseback transactions and to consolidate, merge or transfer all, or substantially all of our assets. They also contain provisions requiring the purchase of the 2018 Notes upon a change of control under certain specified circumstances, as well as other customary provisions.

On May 21, 2007, U. S. Steel issued a total of $1,100 million of senior notes consisting of $350 million at 6.65 percent due 2037, $450 million at 6.05 percent due 2017, and $300 million at 5.65 percent due 2013, collectively, the Senior Notes (and individually, the 2037 Senior Notes, the 2017 Senior Notes and the 2013 Senior Notes, respectively). Interest is payable semi-annually on June 1st and December 1st of each year. All of the $300 million 5.65 percent Senior Notes due June 1, 2013 were redeemed in April 2012 as noted above. The Senior Notes are not listed on any national securities exchange. The Senior Notes contain covenants limiting our ability to create liens, to enter into sale-leaseback transactions and to consolidate, merge or transfer all, or substantially all of our assets. They also contain provisions requiring the purchase of the Senior Notes upon a change of control under certain specified circumstances, as well as other customary provisions.
2014 Senior Convertible Notes
On May 4, 2009, U. S. Steel issued $863 million of 4.00% Senior Convertible Notes due May 15, 2014 (Senior Convertible Notes). The Senior Convertible Notes are senior and unsecured obligations that rank equally with

F-32

Table of Contents

U. S. Steel’s other existing and future senior and unsecured indebtedness. Interest on the Senior Convertible Notes is payable semi-annually on May 15th and November 15th of each year. The Senior Convertible Notes are not listed on any national securities exchange.

U. S. Steel may not redeem the Senior Convertible Notes prior to their maturity date. Holders may convert their Senior Convertible Notes into shares of U. S. Steel common stock at their option at any time prior to the close of business on the second scheduled trading day immediately preceding the maturity date of May 15, 2014. The initial conversion rate for the Senior Convertible Notes is 31.3725 shares of U. S. Steel common stock per $1,000 principal amount of Senior Convertible Notes, equivalent to an initial conversion price of approximately $31.875 per share of common stock, subject to adjustment as defined in the Senior Convertible Notes. On the issuance date of the Senior Convertible Notes, the market price of U. S. Steel’s common stock was below the stated conversion price of $31.875 and therefore, there was no beneficial conversion option to the holders. Based on the initial conversion rate, the Senior Convertible Notes are convertible into 27,058,781 shares of U. S. Steel common stock and we reserved for the possible issuance of 33,824,000 shares, which is the maximum amount that could be issued upon conversion. Other than receiving cash in lieu of fractional shares, holders do not have the option to receive cash upon conversion.

If U. S. Steel undergoes a fundamental change, as defined in the Senior Convertible Notes, holders may require us to repurchase the Senior Convertible Notes in whole or in part for cash at a price equal to 100% of the principal amount of the Senior Convertible Notes to be purchased plus any accrued and unpaid interest (including additional interest, if any) up to, but excluding the repurchase date.

The Senior Convertible Notes contain covenants limiting our ability to create liens, to enter into sale-leaseback transactions and to consolidate, merge or transfer all, or substantially all of our assets. They also contain provisions requiring the purchase of the Senior Convertible Notes upon a change of control under certain specified circumstances, as well as other customary provisions. In addition, certain payment defaults on other indebtedness are a default under the Senior Convertible Notes.

In March 2013, U. S. Steel repurchased approximately $542 million aggregate principal amount of our 4.0% Senior Convertible Notes due 2014, reducing the outstanding principal amount of the notes to $322 million.
The repurchases were funded with the net proceeds from the 2021 Senior Notes and the 2019 Senior Convertible Notes and cash. The aggregate purchase price, including accrued and unpaid interest and fees, for the convertible notes repurchased was approximately $580 million. U. S. Steel recorded a pretax charge of $34 million to net interest and other financial costs during 2013 related mainly to the repurchase premiums.

Province Note
In its acquisition of Stelco on October 31, 2007, U. S. Steel assumed a note that Stelco had issued to the Province of Ontario, Canada. The face amount of the Province Note is C$150 million (approximately $141 million and $151 million at December 31, 2013 and 2012) and is payable on December 31, 2015. The Province Note is unsecured and is subject to a 75 percent discount if the solvency deficiencies in the four main Stelco pension plans (see Note 16) are eliminated on or before the maturity date. The Province Note bears interest at a rate of one percent per annum and is payable semi-annually. Upon the acquisition, the Province Note was recorded at its present value of amounts to be paid using a current interest rate, in accordance with FAS 141. The Province Note will be accreted up to its face value over its term assuming an effective interest rate of 6.67 percent.

Obligations relating to Environmental Revenue Bonds
At December 31, 2013, U. S. Steel is the obligor on $549 million of Environmental Revenue Bonds. On August 17, 2012, U. S. Steel entered into loan agreements with several local authorities in connection with the issuance and sale of $94 million of Environmental Revenue Bonds due August 1, 2042 (2042 Environmental Revenue Bonds) to fund certain capital projects at our Gary Works, Clairton Plant and Granite City Works. The net proceeds from the sale of the 2042 Environmental Revenue Bonds were $93 million after fees of $1 million and are reflected as restricted cash in other noncurrent assets and become unrestricted as capital expenditures for these projects are made. At December 31, 2013, $43 million of this restricted cash remained. The interest rate on the loans is 5.75 percent and interest is payable semi-annually on February 1st and August 1st of each year.

Recovery Zone Facility Bonds
On December 1, 2010, U. S. Steel entered into a loan agreement in connection with the issuance and sale by the Lorain County Port Authority of $70 million of Lorain County Port Authority Recovery Zone Facility Revenue Bonds (Recovery Zone Bonds). The proceeds from the sale of the Recovery Zone Bonds were used to fund a

F-33

Table of Contents

capital project at our Lorain Tubular Operations in Ohio. The interest rate on the loan is 6.75 percent and interest is payable semi-annually on June 1st and December 1st of each year.

Fairfield Caster Lease
U. S. Steel is the lessee of a slab caster at Fairfield Works in Alabama. In December 2012, U. S. Steel exercised an option to renew the lease for a nine year term and purchase the facility at the expiration of the renewal period in June 2022.

Amended Credit Agreement
On July 20, 2011, U. S. Steel entered into an amendment and restatement of its $750 million Credit Agreement dated June 12, 2009 (Amended Credit Agreement) which increased the facility to $875 million, extended the term to July 20, 2016, added a minimum liquidity requirement to address the maturity of the 4% Senior Convertible Notes due in May 2014, reduced the fixed charge coverage ratio and increased the availability by $25 million prior to its measurement and made amendments to other terms and conditions. The Amended Credit Agreement is secured with a security interest in the majority of U. S. Steel’s domestic inventory, certain accounts receivable and related collateral.

The Amended Credit Agreement establishes a borrowing base formula, which limits the amounts U. S. Steel can borrow to a percent of the value of certain domestic inventory less specified reserves.

The Amended Credit Agreement provides for borrowings at interest rates based on defined, short-term, market rates plus a spread based on availability and includes other customary terms and conditions including restrictions on our ability to create certain liens and to consolidate, merge or transfer all, or substantially all, of our assets.

As of December 31, 2013, there were no amounts drawn on the Amended Credit Agreement and inventory values calculated in accordance with the Amended Credit Agreement supported the full $875 million of the facility. Under the Amended Credit Agreement, U. S. Steel must maintain a fixed charge coverage ratio (as further defined in the Amended Credit Agreement) of at least 1.00 to 1.00 for the most recent four consecutive quarters when availability under the Amended Credit Agreement is less than the greater of 10.0% of the total aggregate commitments and $87.5 million. Since availability was greater than $87.5 million, compliance with the fixed charge coverage ratio covenant was not applicable. Based on the most recent four quarters as of December 31, 2013, we would not meet this covenant. If the value of inventory does not support the full amount of the facility or we are not able to meet this covenant in the future, the full amount of this facility would not be available to the Company.

In addition, beginning on February 13, 2014 and extending until the repayment or conversion of the $322 million of 4.00% Senior Convertible Notes, we must maintain minimum liquidity (as further defined in the Amended Credit Agreement) of at least $175 million. The minimum liquidity must include at least $145 million of availability under the Amended Credit Agreement.

Receivables Purchase Agreement
U. S. Steel has a Receivables Purchase Agreement (RPA) under which trade accounts receivable are sold, on a daily basis without recourse, to U. S. Steel Receivables, LLC (ÁñÁ«ÊÓƵR), a wholly owned, bankruptcy-remote, special purpose entity used only for the securitization program. As U. S. Steel accesses this facility, ÁñÁ«ÊÓƵR sells senior undivided interests in the receivables to a third-party and a third-party commercial paper conduit, while maintaining a subordinated undivided interest in a portion of the receivables. U. S. Steel has agreed to continue servicing the sold receivables at market rates.
At both December 31, 2013 and 2012, eligible accounts receivable supported $625 million of availability under the RPA. There were no receivables sold to third-parties under this facility at both December 31, 2013 and December 31, 2012. The subordinated retained interest at both December 31, 2013 and December 31, 2012 was $625 million with availability at December 31, 2013 of $572 million due to approximately $53 million of letters of credit outstanding.

ÁñÁ«ÊÓƵR pays the third parties a discount based on the third-parties’ borrowing costs plus incremental fees. We paid $3 million and $4 million, in 2013 and 2012 respectively, relating to fees on the RPA. These costs are included in other financial costs in the statement of operations.

Generally, the facility provides that as payments are collected from the sold accounts receivables, ÁñÁ«ÊÓƵR may elect to have the third-parties reinvest the proceeds in new eligible accounts receivable. As there was no activity

F-34

Table of Contents

under this facility during 2013, there were no collections reinvested. During 2012 collections of eligible accounts receivable of $1,175 million were reinvested.

The table below summarizes the trade receivables at December 31, 2013 and 2012, for ÁñÁ«ÊÓƵR:

(In millions)
 
2013
 
2012
Balance of accounts receivable-net, eligible for sale to third-parties
 
$
988

 
$
1,127

Accounts receivable sold to third-parties
 

 

Balance included in Receivables on the balance sheet of U. S. Steel
 
$
988

 
$
1,127


The net book value of U. S. Steel’s retained interest in the receivables represents the best estimate of the fair market value due to the short-term nature of the receivables. The retained interest in the receivables is recorded net of the allowance for bad debts, which historically have not been significant.

The facility may be terminated on the occurrence and failure to cure certain events, including, among others, failure of ÁñÁ«ÊÓƵR to maintain certain ratios related to the collectability of the receivables and failure to make payment under its material debt obligations, and may also be terminated upon a change of control. The facility expires in July 2016.

U. S. Steel Košice (ÁñÁ«ÊÓƵK) credit facilities
At both December 31, 2013 and 2012, ÁñÁ«ÊÓƵK had no borrowings under its €200 million (approximately $276 million and $264 million, respectively) unsecured revolving credit facility.

On July 15, 2013, ÁñÁ«ÊÓƵK entered into a €200 million revolving credit facility agreement (the Credit Agreement) that replaced ÁñÁ«ÊÓƵK's €200 million credit facility that was scheduled to expire in August 2013. The Credit Agreement contains certain ÁñÁ«ÊÓƵK financial covenants (as further defined in the Credit Agreement), including maximum Leverage, maximum Net Debt to Tangible Net Worth, and minimum Interest Cover ratios. The covenants are measured semi-annually for the period covering the last twelve calendar months. ÁñÁ«ÊÓƵK may not draw on the Credit Agreement if it does not comply with any of the financial covenants until the next measurement date. The Credit Agreement expires in July 2016.
ÁñÁ«ÊÓƵK has a €20 million (approximately $27 million at December 31, 2013) unsecured revolving credit facility that expires in December 2015.
On December 6, 2013, ÁñÁ«ÊÓƵK entered into a €10 million (approximately $14 million at December 31, 2013) unsecured credit facility that expires in December 2016. The credit facility contains certain ÁñÁ«ÊÓƵK financial covenants as further defined within the facility as well as other customary terms and conditions.
At December 31, 2013, ÁñÁ«ÊÓƵK had no borrowings under its €20 million and €10 million unsecured credit facilities (collectively approximately $41 million) and the availability was approximately $38 million due to approximately $3 million of customs and other guarantees outstanding. At December 31, 2012, ÁñÁ«ÊÓƵK had no borrowings under its €20 million credit facility (which approximated $26 million) and the availability was approximately $24 million due to approximately $2 million of customs and other guarantees outstanding.

Each of these facilities bear interest at the applicable inter-bank offer rate plus a margin and contain customary terms and conditions. ÁñÁ«ÊÓƵK is the sole obligor on the facilities and is obligated to pay a commitment fee on the undrawn portion of the facilities.

Change in control event
If there is a change in control of U. S. Steel, the following may occur: (a) debt obligations totaling $3,212 million as of December 31, 2013 (including the Senior Notes and Senior Convertible Notes) may be declared immediately due and payable; (b) the Amended Credit Agreement, the RPA and ÁñÁ«ÊÓƵK’s €200 million revolving credit agreement may be terminated and any amounts outstanding declared immediately due and payable; and (c) U. S. Steel may be required to either repurchase the leased Fairfield Works slab caster for $39 million or provide a letter of credit to secure the remaining obligation.




F-35

Table of Contents

Debt Maturities – Aggregate maturities of debt are as follows (in millions):

2014
 
2015
 
2016
 
2017
 
2018
 
Later
Years
 
Total
 
$
323

 
$
189

 
$
45

 
$
500

 
$
503

 
$
2,433

 
$
3,993

(a) 

(a)Debt maturities include the Province Note fair value adjustment discussed above.

15. 2012 Labor Agreements

Effective September 1, 2012, U. S. Steel and its U. S. Steel Tubular Products, Inc. subsidiary reached new labor agreements with the United Steelworkers (USW), which cover approximately 16,600 employees at our flat-rolled, tubular, coke-making and iron ore operations in the United States (the 2012 Labor Agreements). The 2012 Labor Agreements expire on September 1, 2015. The agreements provided for a $2,000 lump sum payment that was paid to each covered active USW member in October 2012, which resulted in U. S. Steel recognizing a pretax charge of $35 million in the third quarter of 2012. The agreements also provide for a lump sum payment of $500, effective April 1, 2014, to each covered USW member active on that date which is being accrued over the requisite service period.

The 2012 Labor Agreements contain no-strike provisions and include wage increases of 2.0 percent on September 1, 2013 and 2.5 percent on January 1, 2015. The 2012 Labor Agreements also provide for pension and other benefit changes for both current employees and retirees (see Note 16).

16. Pensions and Other Benefits

U. S. Steel has defined contribution or multi-employer retirement benefits for more than half of its North American employees and non-contributory defined benefit pension plans covering the remaining North American employees. In the United States, benefits under the defined benefit pension plans are based upon years of service and final average pensionable earnings, or a minimum benefit based upon years of service, whichever is greater. In addition, pension benefits for most salaried employees in the United States under these plans are based upon a percent of total career pensionable earnings. Most salaried employees in the United States, including those not participating in the defined benefit pension plans of the Company, participate in defined contribution plans 
(401(k) plans) whereby the Company matches a certain percentage of salary based on the amount contributed by the participant. For those without defined benefit coverage, the Company also provides a retirement account benefit based on salary and attained age. The main U. S. Steel defined benefit pension plan was closed to new participants in 2003. At December 31, 2013, approximately 60 percent of U. S. Steel’s union employees in the United States are covered by the Steelworkers Pension Trust (SPT), a multi-employer pension plan, to which U. S. Steel contributes on the basis of a fixed dollar amount for each hour worked.

The majority of employees and retirees of ÁñÁ«ÊÓƵC participate in defined benefit pension plans and retiree health and life insurance plans. The majority of ÁñÁ«ÊÓƵC union employees participate in defined benefit pension plans for which benefits are based upon years of service multiplied by a flat dollar rate. The main Hamilton bargaining unit defined benefit pension plan was closed to new entrants effective October 15, 2011, and the main Lake Erie bargaining unit defined benefit pension plan was closed to new entrants effective April 16, 2010. Hamilton and Lake Erie union employees hired on or after those respective dates are covered by defined contribution arrangements. The salaried Hamilton and Lake Erie defined benefit pension plans were closed to new participants in 1997 and currently less than half of active salaried ÁñÁ«ÊÓƵC employees participate in these plans where benefits are based on final average pensionable earnings or a flat dollar rate. The balance of salaried employees participates in defined contribution arrangements.

U.S. Steel’s defined benefit retiree health care and life insurance plans (Other Benefits) cover the majority of its employees in North America upon their retirement. Health care benefits are provided through hospital, surgical, major medical and drug benefit provisions or through health maintenance organizations, both subject to various cost sharing features, and in most cases domestically, an employer cap on total costs. Upon their retirement, most salaried employees in the United States are provided with a flat dollar pre-Medicare benefit and a death benefit.

The majority of U. S. Steel’s European employees are covered by government-sponsored programs into which U. S. Steel makes required contributions. Also, U. S. Steel sponsors defined benefit plans for most European employees covering benefit payments due to employees upon their retirement, some of which are government

F-36

Table of Contents

mandated. These same employees receive service awards throughout their careers based on stipulated service and, in some cases, age and service.

U. S. Steel uses a December 31 measurement date for its plans and may have an interim measurement date if significant events occur. Details relating to Pension Benefits and Other Benefits are below.

 
 
Pension Benefits
 
Other Benefits
(In millions)
 
2013
 
2012
 
2013
 
2012
Change in benefit obligations
 
 
 
 
 
 
 
 
Benefit obligations at January 1
 
$
11,347

 
$
10,770

 
$
3,940

 
$
4,186

Service cost
 
128

 
118

 
27

 
28

Interest cost
 
403

 
467

 
141

 
170

Plan amendments
 

 
29

 

 
(522
)
Actuarial losses (gains)
 
(421
)
 
848

 
(420
)
 
375

Exchange rate loss (gain)
 
(234
)
 
81

 
(55
)
 
19

Settlements, curtailments and termination benefits
 
(16
)
 
(28
)
 

 

Benefits paid
 
(950
)
 
(938
)
 
(255
)
 
(316
)
Benefit obligations at December 31
 
$
10,257

 
$
11,347

 
$
3,378

 
$
3,940

Change in plan assets
 
 
 
 
 
 
 
 
Fair value of plan at January 1
 
$
8,659

 
$
8,353

 
$
1,732

 
$
1,473

Actual return on plan assets
 
1,363

 
945

 
346

 
196

Employer contributions
 
226

 
234

 
10

 
76

Exchange rate gain (loss)
 
(187
)
 
56

 

 

Benefits paid from plan assets
 
(939
)
 
(929
)
 
(118
)
 
(13
)
Fair value of plan assets at December 31
 
$
9,122

 
$
8,659

 
$
1,970

 
$
1,732

Funded status of plans at December 31
 
$
(1,135
)
 
$
(2,688
)
 
$
(1,408
)
 
$
(2,208
)

F-37

Table of Contents

Amounts recognized in accumulated other comprehensive loss:

 
 
 
 
2013
 
 
(In millions)
 
12/31/2012
 
Amortization
 
Activity
 
12/31/2013
Pensions
 
 
 
 
Prior Service Cost
 
$
99

 
$
(24
)
 
$
1

 
$
76

Actuarial losses
 
4,656

 
(367
)
 
(1,165
)
 
3,124

Other Benefits
 
 
 
 
 
 
 
 
Prior Service Cost
 
(180
)
 
13

 

 
(167
)
Actuarial Losses
 
613

 
(31
)
 
(632
)
 
(50
)

As of December 31, 2013 and 2012, the following amounts were recognized in the balance sheet:

 
 
Pension Benefits
 
Other Benefits
(In millions)
 
2013
 
2012
 
2013
 
2012
Noncurrent assets
 
$
23

 
$
11

 
$

 
$

Current liabilities
 
(298
)
 
(245
)
 
(337
)
 
(360
)
Noncurrent liabilities
 
(860
)
 
(2,454
)
 
(1,071
)
 
(1,848
)
Accumulated other comprehensive loss (a)
 
3,200

 
4,755

 
(217
)
 
433

Net amount recognized
 
$
2,065

 
$
2,067

 
$
(1,625
)
 
$
(1,775
)
(a)
Accumulated other comprehensive loss effects associated with accounting for pensions and other benefits in accordance with ASC Topic 715 at December 31, 2013 and December 31, 2012, respectively, are reflected net of tax of $886 million and $1,568 million respectively, on the Statement of Stockholders’ Equity.

The Accumulated Benefit Obligation (ABO) for all defined benefit pension plans was $9,798 million and $10,817 million at December 31, 2013 and 2012, respectively.

 
 
December 31,
(In millions)
 
2013
 
2012
Information for pension plans with an accumulated benefit obligation in excess of plan assets:
 
 
 
 
Aggregate accumulated benefit obligations (ABO)
 
$
(9,685
)
 
$
(10,782
)
Aggregate projected benefit obligations (PBO)
 
(10,144
)
 
(11,313
)
Aggregate fair value of plan assets
 
8,986

 
8,614


The aggregate ABO in excess of plan assets reflected above is included in the payroll and benefits payable and employee benefits lines on the balance sheet.

Following are the details of net periodic benefit costs related to Pension and Other Benefits:

 
 
Pension Benefits
 
Other Benefits
(In millions)
 
2013
 
2012
 
2011
 
2013
 
2012
 
2011
Components of net periodic benefit cost:
 
 
 
 
 
 
 
 
 
 
 
 
Service cost
 
$
128

 
$
118

 
$
111

 
$
27

 
$
28

 
$
25

Interest cost
 
403

 
467

 
511

 
141

 
170

 
209

Expected return on plan assets
 
(611
)
 
(614
)
 
(623
)
 
(131
)
 
(117
)
 
(105
)
Amortization - prior service costs
 
24

 
22

 
21

 
(13
)
 
11

 
25

- actuarial losses
 
367

 
352

 
352

 
31

 
8

 
5

Net periodic benefit cost, excluding below
 
311

 
345

 
372

 
55

 
100

 
159

Multiemployer plans (a)
 
74

 
70

 
65

 

 

 

Settlement, termination and curtailment (gains)/losses
 
11

 
(3
)
 
6

 

 

 

Net periodic benefit cost
 
$
396

 
$
412

 
$
443

 
$
55

 
$
100

 
$
159

(a)
Primarily represents pension expense for the SPT covering USW employees hired from National Steel Corporation and new USW employees hired after May 21, 2003.


F-38

Table of Contents

Prior to the 2012 Labor Agreements, profit-based amounts were used to reduce retiree medical premiums. This amount was recognized on a deferred basis and estimated as part of the actuarial calculations used to derive Other Benefit expense. Other Benefit expense in 2012 and 2011 included approximately $40 million in costs to reflect the profit-based payments.

Net periodic benefit cost for pensions and other benefits is projected to be approximately $330 million and approximately $15 million, respectively, in 2014. The pension cost projection includes $78 million of contributions to the SPT. The amounts in accumulated other comprehensive income that are expected to be recognized as components of net periodic benefit cost during 2014 are as follows:

(In millions)
 
Pension
Benefits
2014
 
Other
Benefits
2014
Amortization of actuarial loss/(gain)
 
$
282

 
$
(13
)
Amortization of prior service cost
 
22

 
(3
)
Total recognized from accumulated other comprehensive income
 
$
304

 
$
(16
)

Assumptions used to determine the benefit obligation at December 31 and net periodic benefit cost for the year ended December 31 are detailed below:

 
 
Pension Benefits
 
Other Benefits
 
 
2013
 
2012
 
2013
 
2012
 
 
U.S.
 
International
 
U.S.
 
International
 
U.S.
 
International
 
U.S.
 
International
Actuarial assumptions used to determine benefit obligations at December 31:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Discount rate
 
4.50
%
 
4.50
%
 
3.75
%
 
3.75
%
 
4.50
%
 
4.50
%
 
3.75
%
 
3.75
%
Increase in compensation rate
 
4.00
%
 
3.00
%
 
4.00
%
 
3.00
%
 
4.00
%
 
3.00
%
 
4.00
%
 
3.00
%

 
 
Pension Benefits
 
 
2013
 
2012
 
2011
 
 
U.S.
 
International
 
U.S.
 
International
 
U.S.
 
International
Actuarial assumptions used to determine net periodic benefit cost for the year ended December 31:
 
 
 
 
 
 
 
 
 
 
 
 
Discount rate
 
3.75
%
 
3.75
%
 
4.50
%
 
4.50
%
 
5.00
%
 
5.00
%
Expected annual return on plan assets
 
7.75
%
 
7.25
%
 
7.75
%
 
7.25
%
 
8.00
%
 
7.50
%
Increase in compensation rate
 
4.00
%
 
3.00
%
 
4.00
%
 
3.00
%
 
4.00
%
 
3.00
%

 
 
Other Benefits
 
 
2013
 
2012
 
2011
 
 
U.S.
 
International
 
U.S.
 
International
 
U.S.
 
International
Discount rate
 
3.75
%
 
3.75
%
 
4.50
%
 
4.50
%
 
5.00
%
 
5.00
%
Expected annual return on plan assets
 
7.75
%
 
n/a

 
7.75
%
 
n/a

 
8.00
%
 
n/a

Increase in compensation rate
 
4.00
%
 
3.00
%
 
4.00
%
 
3.00
%
 
4.00
%
 
3.00
%

The discount rate reflects the current rate at which the pension and other benefit liabilities could be effectively settled at the measurement date. In setting the domestic rates, we utilize several AAA and AA corporate bond indices as an indication of interest rate movements and levels. Based on this evaluation at December 31, 2013, U. S. Steel increased the discount rate used to measure both domestic Pension and Other Benefits obligations to 4.5 percent. For ÁñÁ«ÊÓƵC benefit plans, a discount rate was selected through a similar review process using Canadian bond rates and indices and at December 31, 2013, U. S. Steel increased the discount rate to 4.5 percent for its Canadian-based pension and other benefits.


F-39

Table of Contents

At December 31, 2013, due to a periodic review of the plans' mortality experience, the Company updated the mortality table used to calculate its main U.S. defined benefit pension and other postretirement benefit liabilities for formerly represented retirees. Previously, custom mortality tables based on plan experience, with no future mortality improvement, were used. As a result of the study, the prior table now assumes mortality improvement of 7 years from the date of liability measurement for this population and increased our projected benefit obligations by approximately $350 million.
 
 
2013
 
2012
Assumed health care cost trend rates at December 31:
 
U.S.
 
Canada
 
U.S.
 
Canada
Health care cost trend rate assumed for next year
 
7.00%
 
6.00%
 
7.00%
 
6.00%
Rate to which the cost trend rate is assumed to decline (the ultimate trend rate)
 
5.00%
 
5.00%
 
5.00%
 
5.00%
Year that the rate reaches the ultimate trend rate
 
2018
 
2018
 
2017
 
2017

A one-percentage-point change in the assumed return on plan assets, discount rate or health care cost trend rates would have the following effects:

(In millions)
 
1-Percentage-
Point Increase
 
1-Percentage-
Point Decrease
Expected return on plan assets
 
 
 
 
Incremental (decrease) increase in:
 
 
 
 
Net periodic pension costs for 2014
 
$
(100
)
 
$
100

Discount rate
 
 
 
 
Incremental (decrease) increase in:
 
 
 
 
Net periodic pension & other benefits costs for 2014
 
$
(39
)
 
$
55

Pension & other benefits liabilities at December 31, 2013
 
$
(1,191
)
 
$
1,418

Health care cost escalation trend rates
 
 
 
 
Incremental increase (decrease) in:
 
 
 
 
Other postretirement benefit obligations
 
$
191

 
$
(161
)
Service and interest costs components
 
$
10

 
$
(8
)
 
U. S. Steel reviews its own actual historical rate experience and expectations of future health care cost trends to determine the escalation of per capita health care costs under U. S. Steel’s benefit plans. About two thirds of our costs for the domestic USW participants’ retiree health benefits in the Company’s main domestic benefit plan are limited to a per capita dollar maximum calculation based on 2006 base year actual costs incurred under the main U. S. Steel benefit plan for USW participants (cost cap). The full effect of the cost cap was deferred in the 2012 Labor Agreements until 2015. After 2015, the Company’s costs for a majority of USW retirees and their dependents are expected to remain fixed with the application of the cost cap and as a result, the cost impact of health care escalation for the Company is projected to be limited for this group.

In our Canadian retiree medical plans, most health care cost escalation results from the drug programs since most hospital and physician benefits are provided by the Government which incurs the escalation. Health care cost escalation applies to most other groups within the Company’s benefit plans, but does not apply to most domestic non-union retirees since their benefits are limited to flat dollar amounts or are not existent.


F-40

Table of Contents

Plan Assets
ASC Topic 820 on fair value measurements includes a three-tier hierarchy as a framework for the inputs used in measuring fair value. The categories for determining fair market value are summarized below:

Level 1 – quoted prices in active markets for identical investments
Level 2 – other significant and observable comparable investments (including quoted prices for similar investments, interest rates, prepayment speeds, credit risk, etc.)
Level 3 – investments lacking easily comparable data (including the plan’s own assumptions in determining the fair value of investments)

U. S. Steel’s Pension plan and Other Benefits plan assets are classified as follows:

Level 1
 
Level 2
 
Level 3
Investment Trusts
 
Internally Managed Partnerships
 
Private Equities
Exchange-traded Funds
 
Non-public Investment Partnerships
 
Timberlands
Short-term Investments
 
Debt Securities - U.S.
 
Real Estate
Equity Securities - U.S.
 
Debt Securities - Foreign
 
Mineral Interests
Equity Securities - Foreign
 
Pooled Funds
 
 
Government Bonds - U.S.
 
Government Bonds - Foreign
 
 

An instrument’s level is based on the lowest level of any input that is significant to the fair value measurement. Investments in investment trusts and exchange-traded funds are valued using a market approach at the closing price reported in an active market. Short term investments are valued at amortized cost which approximates fair value due to the short-term maturity of the instruments. Equity Securities – U.S. and Equity Securities – Foreign are valued at the closing price reported on the active exchange on which the individual securities are traded. Government Bonds – U.S. are valued by accepting a price from a public pricing source. Investments in Internally Managed Partnerships are valued using a market approach at the net asset value of units held, however investment opportunities in these partnerships are restricted to the benefit plans of U. S. Steel, its subsidiaries and current and former affiliates. Investments in non-public investment partnerships and pooled funds are valued using a market approach based on the aggregated value of the underlying investments. Government Bonds – Foreign, Debt Securities – U.S. and Debt Securities – Foreign are valued by accepting a price from a public pricing source or broker quotes. Private Equities are valued using information provided by external managers for each individual investment held in the fund. In 2013, real estate investments were valued using information provided by external managers. Timberland investments (and real estate investments in 2012) are either appraised or valued using the investment managers’ assessment of the assets within the fund. Mineral Interests are valued at the present value of estimated future cash flows discounted at estimated market rates for assets of similar quality and duration.


F-41

Table of Contents

The following is a summary of U. S. Steel’s Pension plan assets carried at fair value at December 31, 2013 and 2012:

 
 
Fair Value Measurements at December 31, 2013 (in millions)
 
 
Total
 
Quoted Prices in
Active Markets
(Level 1)
 
Significant
Observable
Inputs
(Level 2)
 
Significant
Unobservable
Inputs
(Level 3)
Asset Classes
 
 
 
 
 
 
 
 
Interest in Internally Managed Partnership – Fixed Income(a)
 
$
1,830

 
$

 
$
1,830

 
$

Interest in Internally Managed Partnership – Equity(b)
 
3,658

 

 
3,658

 

Interest in Investment Partnerships(c)
 
823

 

 
823

 

Equity securities – Foreign(d)
 
444

 
444

 

 

Pooled funds(e)
 
540

 

 
540

 

Timberlands
 
302

 

 

 
302

Private equities
 
306

 

 

 
306

Real estate
 
301

 

 

 
301

Other(f)
 
918

 
458

 
456

 
4

Total
 
$
9,122

 
$
902

 
$
7,307

 
$
913

(a)
UCF Fixed Income Fund LP – a Delaware limited partnership that offers interests to employee benefit plans for which United States Steel and Carnegie Pension Fund (UCF) acts as trustee, investment advisor and/or investment manager. Looking through the limited partnership, the plan’s holdings are as follows:
Debt Securities – U.S.
$
1,127

Government Bonds – U.S.
629

Agency Mortgages
65

Other
9

Total
$
1,830


(b)
UCF Equity Fund LP – a Delaware limited partnership that offers interests to employee benefit plans for which UCF acts as trustee, investment advisor and/or investment manager. Looking through the limited partnership, the plan’s holdings are as follows:
Equity Securities – U.S.
$
3,346

Equity Securities – Foreign
181

Investment sales receivable
130

Other
1

Total
$
3,658

(c)
Private investment partnerships whose investment objectives are to achieve long-term capital appreciation by investing in global equity markets.
(d)
Includes investments held in a diversified portfolio of Canadian equity securities with no single sector representing more than 30 percent of the portfolio by value.
(e)
Investments in funds incorporated in Canada that invest in diversified portfolios of global debt and equity securities.
(f)
Asset categories that are greater than 3% of investments at fair value are disclosed separately. All Other includes interests in investment trusts, exchange-traded funds, equity securities – U.S., short-term investments, government bonds - foreign, debt securities – foreign, mineral interests and miscellaneous receivables and payables.


F-42

Table of Contents


 
 
Fair Value Measurements at December 31, 2012 (in millions)
 
 
Total
 
Quoted Prices in
Active Markets
(Level 1)
 
Significant
Observable
Inputs
(Level 2)
 
Significant
Unobservable
Inputs
(Level 3)
Asset Classes
 
 
 
 
 
 
 
 
Interest in Internally Managed Partnership – Fixed Income(a)
 
$
1,688

 
$

 
$
1,688

 
$

Interest in Internally Managed Partnership – Equity(b)
 
3,491

 

 
3,491

 

Interest in Investment Partnerships(c)
 
608

 

 
608

 

Equity securities – Foreign(d)
 
482

 
482

 

 

Government bonds – Foreign(e)
 
499

 

 
499

 

Pooled funds(f)
 
312

 

 
312

 

Private equities
 
342

 

 

 
342

Real estate
 
300

 

 

 
300

Other(g)
 
937

 
503

 
193

 
241

Total
 
$
8,659

 
$
985

 
$
6,791

 
$
883

(a)
UCF Fixed Income Fund LP - a Delaware limited partnership that offers interests to employee benefit plans for which UCF acts as trustee, investment advisor and/or investment manager. Looking through the limited partnership, the plan’s holdings are as follows:
Debt Securities – U.S.
$
1,112

Government Bonds – U.S.
473

Agency Mortgages
85

Other
18

Total
$
1,688

(b)
UCF Equity Fund LP - a Delaware limited partnership that offers interests to employee benefit plans for which UCF acts as trustee, investment advisor and/or investment manager. Looking through the limited partnership, the plan’s holdings are as follows:
Equity Securities – U.S.
$
3,166

Equity Securities – Foreign
149

Investment sales receivable
111

Other
65

Total
$
3,491

(c)
Private investment partnerships whose investment objectives are to achieve long-term capital appreciation by investing in global equity markets.
(d)
Includes investments held in a diversified portfolio of Canadian equity securities with no single sector representing more than 30 percent of the portfolio by value.
(e)
Includes investments in Canadian National and Provincial government bonds.
(f)
Investments in funds incorporated in Canada that invest in diversified portfolios of global debt and equity securities.
(g)
Asset categories that are greater than 3% of investments at fair value are disclosed separately. All Other includes interests in investment trusts, exchange-traded funds, short-term investments, government bonds – U.S., debt securities – U.S., debt securities – foreign, timberlands, mineral interests and miscellaneous receivables and payables.


F-43

Table of Contents

The following table sets forth a summary of changes in the fair value of U. S. Steel’s Pension plan Level 3 assets for the years ended December 31, 2013 and 2012 (in millions):

 
 
Other
(Level 3 assets only)
 
 
2013
 
2012
Balance at beginning of period
 
$
883

 
$
850

Transfers in and/or out of Level 3
 

 

Actual return on plan assets:
 
 
 
 
Realized gain
 
89

 
69

Net unrealized gain
 
45

 
8

Purchases, sales, issuances and settlements:
 
 
 
 
Purchases
 
102

 
98

Sales
 
(206
)
 
(142
)
Balance at end of period
 
$
913

 
$
883


The following is a summary of U. S. Steel’s Other Benefits plan assets carried at fair value at December 31, 2013 and 2012:

 
 
Fair Value Measurements at December 31, 2013 (in millions)
 
 
Total
 
Quoted Prices in
Active Markets
(Level 1)
 
Significant
Observable
Inputs
(Level 2)
 
Significant
Unobservable
Inputs
(Level 3)
Asset Classes
 
 
 
 
 
 
 
 
Interest in Internally Managed Partnership – Fixed Income (a)
 
$
513

 
$

 
$
513

 
$

Interest in Internally Managed Partnership – Equity(b)
 
1,190

 

 
1,190

 

Interest in Investment Partnerships(c)
 
131

 

 
131

 

All Other(d)
 
136

 
37

 

 
99

Total
 
$
1,970

 
$
37

 
$
1,834

 
$
99


(a)
UCF Fixed Income Fund LP – a Delaware limited partnership that offers interests to employee benefit plans for which UCF acts as trustee, investment advisor and/or investment manager. Looking through the limited partnership, the plan’s holdings are as follows:
Debt Securities – U.S.
$
308

Government Bonds – U.S.
172

Agency Mortgages
18

Partner contribution receivable
19

Other
(4
)
Total
$
513

(b)
UCF Equity Fund LP – a Delaware limited partnership that offers interests to employee benefit plans for which UCF acts as trustee, investment advisor and/or investment manager. Looking through the limited partnership, the plan’s holdings are as follows:
Equity Securities – U.S.
$
1,081

Equity Securities – Foreign
59

Exchange-traded funds
42

Other
8

Total
$
1,190

(c)
Private investment partnerships whose investment objectives are to achieve long-term capital appreciation by investing in global equity markets.
(d)
Asset categories that are greater than 3% of investments at fair value are disclosed separately. All Other includes short-term investments, exchange-traded funds, private equities, real estate, timberlands and miscellaneous receivables and payables.


F-44

Table of Contents

 
 
Fair Value Measurements at December 31, 2012 (in millions)
 
 
Total
 
Quoted Prices in
Active Markets
(Level 1)
 
Significant
Observable
Inputs
(Level 2)
 
Significant
Unobservable
Inputs
(Level 3)
Asset Classes
 
 
 
 
 
 
 
 
Interest in Internally Managed Partnership – Fixed Income(a)
 
$
468

 
$

 
$
468

 
$

Interest in Internally Managed Partnership – Equity(b)
 
1,061

 

 
1,061

 

Interest in Investment Partnerships(c)
 
94

 

 
94

 

All Other(d)
 
109

 
38

 

 
71

Total
 
$
1,732

 
$
38

 
$
1,623

 
$
71

(a)
UCF Fixed Income Fund LP – a Delaware limited partnership that offers interests to employee benefit plans for which UCF acts as trustee, investment advisor and/or investment manager. Looking through the limited partnership, the plan’s holdings are as follows:
Debt Securities – U.S.
$
308

Government Bonds – U.S.
131

Agency Mortgages
24

Other
5

Total
$
468

(b)
UCF Equity Fund LP – a Delaware limited partnership that offers interests to employee benefit plans for which UCF acts as trustee, investment advisor and/or investment manager. Looking through the limited partnership, the plan’s holdings are as follows:
Equity Securities – U.S.
$
950

Equity Securities – Foreign
45

Investment sales receivable
33

Other
33

Total
$
1,061

(c)
Private investment partnerships whose investment objectives are to achieve long-term capital appreciation by investing in global equity markets.
(d)
Asset categories that are greater than 3% of investments at fair value are disclosed separately. All Other includes short-term investments, exchange-traded funds, private equities, real estate, timberlands and miscellaneous receivables and payables.

The following table sets forth a summary of changes in the fair value of U. S. Steel’s Other Benefits plan Level 3 assets for the years ended December 31, 2013 and 2012 (in millions):

 
 
Other
(Level 3 assets only)
 
 
2013
 
2012
Balance at beginning of period
 
$
71

 
$
57

Transfers in and/or out of Level 3
 

 

Actual return on plan assets:
 
 
 
 
Realized gain
 
8

 
2

Net unrealized gain
 
6

 
3

Purchases, sales, issuances and settlements:
 
 
 
 
Purchases
 
29

 
17

Sales
 
(15
)
 
(8
)
Balance at end of period
 
$
99

 
$
71


U. S. Steel’s investment strategy for its U.S. pension and other benefits plan assets provides for a diversified mix of public equities, high quality bonds and selected smaller investments in private equities, investment trusts and partnerships, timber and mineral interests. For its U.S. Pension and Other Benefit plans, U. S. Steel has a target allocation for plan assets of 60 percent and 70 percent in equities, respectively, with the balance primarily invested in corporate bonds, Treasury bonds and government-backed mortgages. U. S. Steel believes that returns on equities over the long term will be higher than returns from fixed-income securities as actual historical returns from U. S. Steel’s trusts have shown. Returns on bonds tend to offset some of the short-term volatility of stocks. Both equity and fixed-income investments are made across a broad range of industries and companies to provide protection against the impact of volatility in any single industry as well as company specific developments. U. S. Steel will use a 7.75 percent assumed rate of return on assets for the development of net periodic cost for the main defined benefit pension plan and domestic OPEB plans in 2014. The 2014 assumed rate of return is

F-45

Table of Contents

the same as the rate of return used for 2013 domestic expense and was determined by taking into account the intended asset mix and some moderation of the historical premiums that fixed-income and equity investments have yielded above government bonds. Actual returns since the inception of the plans have exceeded this 7.75 percent rate and while recent annual returns have been volatile, it is U. S. Steel’s expectation that rates will achieve this level in future periods.

For ÁñÁ«ÊÓƵC defined benefit pension plans, U. S. Steel’s investment strategy is similar to its strategy for U.S. plans, whereby the Company seeks a diversified mix of large and mid-cap equities, high quality corporate and government bonds and selected smaller investments with a target allocation for plan assets of 65 percent equities. U. S. Steel will use a 7.25 percent assumed rate of return on assets for the development of net periodic costs for the ÁñÁ«ÊÓƵC defined benefit expense in 2014. This is lower than the U.S. pension plan assumption as subcategories within the asset mix are from a more limited investment universe and, as a result, have a lower expected return. The 2014 assumed rate of return is the same as the rate of return used for 2013 ÁñÁ«ÊÓƵC expense.

Steelworkers Pension Trust
U. S. Steel participates in a multi-employer defined benefit pension plan, the Steelworkers Pension Trust (SPT). For most bargaining unit employees participating in the SPT, U. S. Steel contributes to the SPT a fixed dollar amount for each hour worked of $2.65; a rate agreed to as part of the 2012 Labor Agreements, which is set to expire on September 1, 2015. U. S. Steel’s contributions to the SPT represented greater than 5% of the total combined contributions of all employers participating in the plan for the years ended December 31, 2013, 2012 and 2011.

Participation in a multi-employer pension plan agreed to under the terms of a collective bargaining agreement differ from a traditional qualified single employer defined benefit pension plan. The SPT shares risks associated with the plan in the following respects:

a. Contributions to the SPT by U. S. Steel may be used to provide benefits to employees of other participating employers;

b. If a participating employer stops contributing to the SPT, the unfunded obligations of the plan may be borne by the remaining participating employers;

c. If U. S. Steel chooses to stop participating in the SPT, U. S. Steel may be required to pay an amount based on the underfunded status of the plan, referred to as a withdrawal liability.

On March 21, 2011 the Board of Trustees of the SPT elected funding relief which has the effect of decreasing the amount of required minimum contributions in near-term years, but will increase the minimum funding requirements during later plan years. As a result of the election of funding relief, the SPT’s zone funding under the Pension Protection Act may be impacted.

In addition to the funding relief election, the Board of Trustees also elected a special amortization rule, which allows the SPT to separately amortize investment losses incurred during the SPT’s December 31, 2008 plan year-end over a 29 year period, whereas they were previously required to be amortized over a 15 year period.

U. S. Steel’s participation in the SPT for the annual periods ended December 31, 2013, 2012 and 2011 is outlined in the table below.

 
 
Employer
Identification
Number/
Pension Plan
Number
 
Pension
Protection
Act Zone
Status as of
December 31
(a)
 
FIP/RP Status
Pending/
Implemented
(b)
 
U.S. Steel
Contributions
(in millions)
 
Surcharge
Imposed
(c)
 
Expiration Date
of Collective
Bargaining
Agreement
Pension Fund
 
2013
 
2012
 
2013
 
2012
 
2011
 
2013
 
2012
 
Steelworkers Pension Trust
 
23-6648508/499
 
Green
 
Green
 
No
 
$
74

 
$
69

 
$
63

 
No
 
No
 
September 1, 2015
(a)
The zone status is based on information that U. S. Steel received from the plan and is certified by the plan’s actuary. Among other factors, plans in the green zone are at least 80 percent funded, while plans in the yellow zone are less than 80 percent funded and plans in the red zone are less than 65 percent funded.
(b)
Indicates if a financial improvement plan (FIP) or a rehabilitation plan (RP) is either pending or has been implemented.
(c)
Indicates whether there were charges to U. S. Steel from the plan.



F-46

Table of Contents

Cash Flows
Employer Contributions – In addition to the contributions to the Steelworkers Pension Trust noted in the table above, U. S. Steel made voluntary contributions in 2013 of $140 million to its main defined benefit pension plan, $82 million in required contributions to the ÁñÁ«ÊÓƵC plans and $30 million of pension payments not funded by trusts. In 2012, U. S. Steel made a $140 million voluntary contribution to its main defined benefit pension plan, $94 million in required contributions to the ÁñÁ«ÊÓƵC plans and $20 million of pension payments not funded by trusts.

Cash payments totaling $137 million and $303 million were made for other postretirement benefit payments not funded by trusts in 2013 and 2012, respectively. The decrease in cash benefit payments not funded by trusts is due to the conversion of our Medicare eligible USW retirees to a fully insured plan and the utilization of assets previously contributed to our trust for represented retiree health care on a voluntary basis to pay retiree benefits during 2013. In addition, in 2013, we made a $10 million contribution to our trust for represented retiree health care and life insurance benefits; however, the $75 million contribution to a restricted account within the same trust as required by collective bargaining agreements, that was due in December 2013 has been deferred until December 2016. U. S. Steel is similarly required to make $75 million contributions to that trust account during both 2014 and 2015 annual periods.

In conjunction with the acquisition of Stelco, now ÁñÁ«ÊÓƵC, U. S. Steel assumed the pension plan funding agreement (the Pension Agreement) that Stelco had entered into with the Superintendent of Financial Services of Ontario (the Province) on March 31, 2006 that covers ÁñÁ«ÊÓƵC’s four main pension plans. The Pension Agreement requires minimum contributions of C$70 million (approximately $67 million) per year in 2011 through 2015 plus additional annual contributions for benefit improvements, primarily related to union retiree indexing provisions. With the Hamilton Works and Lake Erie Works collective bargaining agreement settlements in 2011 and 2010, respectively, cost of living provisions are no longer provided through the pension plan covering former represented employees. The Pension Agreement remains in effect with its defined annual contributions as noted above until the earlier of full solvency funding for the four main plans or until December 31, 2015, when minimum funding requirements for the plans resume under the provincial pension legislation.

Estimated Future Benefit Payments – The following benefit payments, which reflect expected future service as appropriate, are expected to be paid from U. S. Steel’s defined benefit plans:

(In millions)
 
Pension
Benefits
 
Other
Benefits
2014
 
$
955

 
$
266

2015
 
808

 
285

2016
 
796

 
280

2017
 
789

 
241

2018
 
771

 
232

Years 2019 - 2023
 
3,563

 
1,077


Defined contribution plans
U. S. Steel also contributes to several defined contribution plans for its salaried employees. Approximately 66% of non-union salaried employees in North America receive pension benefits through a defined contribution pension plan with contribution percentages based on age, for which company contributions totaled $19 million, $17 million and $15 million in 2013, 2012 and 2011, respectively. U. S. Steel’s matching contributions to salaried employees’ defined contribution savings fund plans, which for the most part are based on a percentage of the employees’ contributions, totaled $23 million in 2013, $21 million in 2012 and $20 million in 2011. Most union employees are eligible to participate in a defined contribution savings fund plan where there is no company match on savings except for certain Canadian and Tubular hourly employees whose company contributions totaled $3 million in 2013 and 2012 and $2 million in 2011. U. S. Steel also maintains a supplemental thrift plan to provide benefits which are otherwise limited by the Internal Revenue Service for qualified plans. U. S. Steel’s costs under these defined contribution plans totaled $2 million in 2013, $1 million in 2012 and $2 million in 2011.

Other postemployment benefits
The Company provides benefits to former or inactive employees after employment but before retirement. Certain benefits including workers’ compensation and black lung benefits represent material obligations to the Company and under the guidance for nonretirement postemployment benefits, have historically been treated as accrued benefit obligations, similar to the accounting treatment provided for pensions and other benefits. APBO liabilities for these benefits recorded at December 31, 2013, totaled $122 million as compared to $102 million at

F-47

Table of Contents

December 31, 2012. APBO amounts were developed assuming a discount rate of 4.50 percent and 3.75 percent at December 31, 2013 and 2012. Net periodic benefit cost for these benefits is projected to be $16 million in 2014 compared to $13 million in 2013 and $12 million in 2012. The projected cost in 2014 includes $1 million in unrecognized actuarial losses that will be recorded against accumulated other comprehensive income.

Pension Funding
In November 2013, U. S. Steel’s Board of Directors (the Board) authorized voluntary contributions to U. S. Steel’s trusts for pensions and other benefits of up to $300 million through the end of 2015.

In July 2012, pension stabilization legislation was enacted that includes a revised interest rate formula to be used to measure defined benefit pension obligations for calculating minimum annual contributions. The new interest rate formula results in higher interest rates for minimum funding calculations as compared to prior law over the next few years, which will improve the funded status of our main defined benefit pension plan and reduce minimum required contributions. U. S. Steel made voluntary contributions to our main U.S. defined benefit plan of $140 million in 2013 and 2012. U. S. Steel will likely make voluntary contributions of similar amounts in future periods in order to mitigate potentially larger mandatory contributions in later years. Assuming future asset performance consistent with our expected long-term earnings rate assumption of 7.75%, we anticipate that the pension stabilization legislation interest rate changes will allow us to continue to make voluntary contributions of approximately $140 million per year through 2015 before we could be required to contribute more than that amount should the current low interest rate environment persist.

17. Asset Retirement Obligations

U. S. Steel’s asset retirement obligations (AROs) primarily relate to mine and landfill closure and post-closure costs. The following table reflects changes in the carrying values of AROs for the years ended December 31, 2013 and 2012:
 
 
December 31,
 
(In millions)
 
2013
 
2012
 
Balance at beginning of year
 
$
33

 
$
38

 
Additional obligations incurred
 
28

 
2

 
Obligations settled
 
(7
)
 
(9
)
 
Accretion expense
 
5

 
2

 
Balance at end of period
 
$
59

 
$
33

 

Certain AROs related to disposal costs of the majority of fixed assets at our integrated steel facilities have not been recorded because they have an indeterminate settlement date. These AROs will be initially recognized in the period in which sufficient information exists to estimate their fair value.

18. Fair Value of Financial Instruments

The carrying value of cash and cash equivalents, current accounts and notes receivable, accounts payable, bank checks outstanding and accrued interest included in the Consolidated Balance Sheet approximate fair value. See Note 13 for disclosure of U. S. Steel’s derivative instruments, which are accounted for at fair value on a recurring basis.

The following table summarizes U. S. Steel’s financial assets and liabilities that were not carried at fair value at December 31, 2013 and 2012.

 
 
December 31, 2013
 
December 31, 2012
(In millions)
 
Fair Value
 
Carrying
Amount
 
Fair Value
 
Carrying
Amount
Financial assets:
 
 
 
 
 
 
 
 
Investments and long-term receivables (a)
 
$
63

 
$
63

 
$
39

 
$
39

Financial liabilities:
 
 
 
 
 
 
 
 
Debt (b)
 
$
4,198

 
$
3,904

 
$
4,113

 
$
3,902

(a)Excludes equity method investments.
(b)Excludes borrowings under the RPA and capital lease obligations.


F-48

Table of Contents

The following methods and assumptions were used to estimate the fair value of financial instruments included in the table above:

Investments and long-term receivables: Fair value is based on Level 2 inputs which were discounted cash flows. U. S. Steel is subject to market risk and liquidity risk related to its investments.

Long-term debt instruments: Fair value was determined using Level 2 inputs which were derived from quoted market prices and is based on the yield on public debt where available or current borrowing rates available for financings with similar terms and maturities.

Fair value of the financial assets and liabilities disclosed herein is not necessarily representative of the amount that could be realized or settled, nor does the fair value amount consider the tax consequences of realization or settlement.

Financial guarantees are U. S. Steel’s only unrecognized financial instrument. For details relating to financial guarantees see Note 24.

19.    Reclassifications from Accumulated Other Comprehensive Income (AOCI)
(in millions) (a)
 
Pension and
Other Benefit
Items
 
Foreign
Currency
Items
 
Total
Balance at December 31, 2011
 
$
(3,598
)
 
$
231

 
$
(3,367
)
Other comprehensive income (loss) before reclassifications
 
(278
)
 
114

 
(164
)
Amounts reclassified from AOCI (b)
 
263

 

 
263

Net current-period other comprehensive income
 
(15
)
 
114

 
99

Balance at December 31, 2012
 
$
(3,613
)
 
$
345

 
$
(3,268
)
Other comprehensive income (loss) before reclassifications
 
1,220

 
52

 
1,272

Amounts reclassified from AOCI
 
266

(b) 
(22
)
(c) 
244

Net current-period other comprehensive income
 
1,486

 
30

 
1,516

Balance at December 31, 2013
 
$
(2,127
)
 
$
375

 
$
(1,752
)
(a)All amounts are net of tax. Amounts in parentheses indicate debits.
(b)See table below for further details.
(c)Included in Income tax (benefit) provision line on the Consolidated Statement of Operations
 
 
 
 
Amount reclassified
from AOCI
 
(In millions) (a)
 
Details about AOCI components
 
2013
 
2012
 
 
 
Amortization of pension and other benefit items
 
 
 
 
 
 
 
Prior service costs
 
$
(11
)
 
$
(33
)
(b) 
 
 
Actuarial gains/(losses)
 
(398
)
 
(360
)
(b) 
 
 
Total before tax
 
(409
)
 
(393
)
 
 
 
Tax benefit
 
143

 
130

 
 
 
Net of tax
 
$
(266
)
 
$
(263
)
 
(a)Amounts in parentheses indicate debits to income/loss.
(b)
These AOCI components are included in the computation of net periodic benefit cost (see Note 16 for additional details).



F-49

Table of Contents

20. Supplemental Cash Flow Information

(In millions)
 
2013
 
2012
 
2011
 
Net cash used in operating activities included:
 
 
 
 
 
 
 
Interest and other financial costs paid (net of amount capitalized)
 
$
(238
)
 
$
(239
)
 
$
(222
)
 
Income taxes (paid) refunded
 
$
(20
)
 
$
(71
)
 
$
13

 
Non-cash investing and financing activities:
 
 
 
 
 
 
 
Change in accrued capital expenditures
 
$
(14
)
 
$
(52
)
 
 
(a) 
Assets acquired under capital lease
 
$

 
$
35

 
$

 
U. S. Steel common stock issued for employee stock plans
 
$

 
$
2

 
$

 
(a)The change in accrued capital expenditures was insignificant for the year ended December 31, 2011.

21. Transactions with Related Parties

Net sales to related parties and receivables from related parties primarily reflect sales of steel products to equity investees. Generally, transactions are conducted under long-term market-based contractual arrangements. Related party sales and service transactions were $1,155 million, $1,303 million and $1,258 million in 2013, 2012 and 2011, respectively.

Purchases from related parties for outside processing services provided by equity investees amounted to $67 million, $58 million and $54 million during 2013, 2012 and 2011, respectively. Purchases of iron ore pellets from related parties amounted to $246 million, $298 million and $215 million for the years ended December 31, 2013, 2012 and 2011, respectively.

Accounts payable to related parties include balances due to PRO-TEC Coating Company (PRO-TEC) of $70 million and $75 million at December 31, 2013 and 2012, respectively for invoicing and receivables collection services provided by U. S. Steel. U. S. Steel, as PRO-TEC’s exclusive sales agent, is responsible for credit risk related to those receivables. U. S. Steel also provides PRO-TEC marketing, selling and customer service functions. Payables to other related parties totaled $3 million at both December 31, 2013 and 2012.

22. Leases

Future minimum commitments for capital leases (including sale-leasebacks accounted for as financings) and for operating leases having initial non-cancelable lease terms in excess of one year are as follows:

(In millions)
 
Capital
Leases
 
Operating
Leases
2014
 
$
5

 
$
76

2015
 
5

 
71

2016
 
5

 
63

2017
 
5

 
45

2018
 
5

 
14

Later years
 
26

 
31

Sublease rentals
 

 

Total minimum lease payments
 
$
51

 
$
300

Less imputed interest costs
 
16

 
 
Present value of net minimum lease payments included in long-term debt (see Note 14)
 
$
35

 
 

Operating lease rental expense:

(In millions)
 
2013
 
2012
 
2011
Minimum rentals
 
$
111

 
$
91

 
$
95

Contingent rentals
 
11

 
12

 
11

Sublease rentals
 

 

 

Net rental expense
 
$
122

 
$
103

 
$
106



F-50

Table of Contents

U. S. Steel leases a wide variety of facilities and equipment under operating leases, including land and building space, office equipment, production equipment and transportation equipment. Most long-term leases include renewal options and, in certain leases, purchase options. See the discussion of residual value guarantees under “other contingencies” in Note 24. Contingent rental payments are determined based on operating lease agreements that include floating rental charges that are directly associated to variable operating components.

23. Restructuring and Other Charges

During the fourth quarter of 2013, the Company implemented certain headcount reductions and production facility closures related to our iron and steelmaking facilities at Hamilton Works in Canada, barge operations related to Warrior and Gulf Navigation (WGN) in Alabama and administrative headcount reductions at our Hamilton Works and Lake Erie Works also in Canada. We closed our iron and steelmaking facilities at Hamilton Works effective December 31, 2013. Charges for restructuring and ongoing cost reduction initiatives are recorded in the period the Company commits to a restructuring or cost reduction plan, or executes specific actions contemplated by the plan and all criteria for liability recognition have been met. Charges related to the restructuring and cost reductions include severance costs, accelerated depreciation and other closure costs. These costs are not included in the measure of segment performance for any of our reportable segments (see Note 3). There were no such similar charges in 2012 or 2011.
The activity in the accrued balances and the non-cash charges and credits incurred in relation to restructuring and other cost reduction programs during the year ended December 31, 2013 were as follows:
 
 
Severance
 
Exit
 
Accelerated
 
(in millions)
 
Accrual
 
Costs
 
Depreciation
 
 
 
 
 
 
 
 
 
Balance at December 31, 2012
 
$

 
$

 
$

 
 
 
 
 
 
 
 
 
Additional charges
 
16

 (a) 
6

 (b) 
222

 (c) 
Cash payments/utilization
 

 

 
(222
)
 
Other adjustments and re-classes
 

 

 

 
 
 
 
 
 
 
 
 
Balance at December 31, 2013
 
$
16

 
$
6

 
$

 
(a) Amount relates to charges recognized for severance benefits for approximately 180 employees terminated at Hamilton Works and Lake Erie Works and excludes associated pension curtailment charges of approximately $4 million (see Note 16).
(b) Amount relates to exit costs associated with the closure of the WGN.
(c) Accelerated depreciation charges are related to the closure of the iron and steelmaking facilities at Hamilton Works and assets related to WGN.

Accrued liabilities for restructuring and other cost reduction programs are included in the following balance sheet lines:
(in millions)
 
December 31, 2013
 
December 31, 2012
Accounts payable
 
$
6

 
$

Payroll and benefits payable
 
8

 

Employee benefits
 
8

 

Total
 
$
22

 
$


24. Contingencies and Commitments

U. S. Steel is the subject of, or party to, a number of pending or threatened legal actions, contingencies and commitments involving a variety of matters, including laws and regulations relating to the environment. Certain of these matters are discussed below. The ultimate resolution of these contingencies could, individually or in the aggregate, be material to the consolidated financial statements. However, management believes that U. S. Steel will remain a viable and competitive enterprise even though it is possible that these contingencies could be resolved unfavorably.


F-51

Table of Contents

U. S. Steel accrues for estimated costs related to existing lawsuits, claims and proceedings when it is probable that it will incur these costs in the future.

Asbestos matters As of December 31, 2013, U. S. Steel was a defendant in approximately 720 active cases involving approximately 3,320 plaintiffs. Many of these cases involve multiple defendants (typically from fifty to more than one hundred). About 2,560, or approximately 77 percent, of these claims are currently pending in jurisdictions which permitted filings with massive numbers of plaintiffs. Based upon U. S. Steel’s experience in such cases, it believes that the actual number of plaintiffs who ultimately assert claims against U. S. Steel will likely be a small fraction of the total number of plaintiffs. During 2013, U. S. Steel paid approximately $11 million in settlements. These settlements and other dispositions resolved approximately 250 claims. New case filings in 2013 added approximately 240 claims. At December 31, 2012, U. S. Steel was a defendant in approximately 790 active cases involving approximately 3,330 plaintiffs. During 2012, U. S. Steel paid approximately $15 million in settlements. These settlements and other dispositions resolved approximately 190 claims. New case filings in 2012 added approximately 285 claims. Most claims filed in 2013 and 2012 involved individual or small groups of claimants as many jurisdictions no longer permit the filing of mass complaints.

Historically, these claims against U. S. Steel fall into three major groups: (1) claims made by persons who allegedly were exposed to asbestos at U. S. Steel facilities (referred to as “premises claims”); (2) claims made by industrial workers allegedly exposed to products manufactured by U. S. Steel; and (3) claims made under certain federal and general maritime laws by employees of former operations of U. S. Steel. In general, the only insurance available to U. S. Steel with respect to asbestos claims is excess casualty insurance, which has multi-million dollar retentions. To date, U. S. Steel has received minimal payments under these policies relating to asbestos claims.

These asbestos cases allege a variety of respiratory and other diseases based on alleged exposure to asbestos. U. S. Steel is currently a defendant in cases in which a total of approximately 270 plaintiffs allege that they are suffering from mesothelioma. The potential for damages against defendants may be greater in cases where the plaintiffs can prove mesothelioma.
In many cases in which claims have been asserted against U. S. Steel, the plaintiffs have been unable to establish any causal relationship to U. S. Steel or our products or premises; however, with the decline in mass plaintiff cases, the incidence of claimants actually alleging a claim against U. S. Steel is increasing. In addition, in many asbestos cases, the plaintiffs have been unable to demonstrate that they have suffered any identifiable injury or compensable loss at all; that any injuries they have incurred did in fact result from alleged exposure to asbestos; or that such alleged exposure was in any way related to U. S. Steel or our products or premises.
The amount U. S. Steel has accrued for pending asbestos claims is not material to U. S. Steel’s financial position. U. S. Steel does not accrue for unasserted asbestos claims because it is not possible to determine whether any loss is probable with respect to such claims or even to estimate the amount or range of any possible losses. The vast majority of pending claims against U. S. Steel allege so-called “premises” liability-based alleged exposure on U. S. Steel’s current or former premises. These claims are made by an indeterminable number of people such as truck drivers, railroad workers, salespersons, contractors and their employees, government inspectors, customers, visitors and even trespassers. In most cases the claimant also was exposed to asbestos in non-U. S. Steel settings; the relative periods of exposure between U. S. Steel and non-U. S. Steel settings vary with each claimant; and the strength or weakness of the causal link between U. S. Steel exposure and any injury vary widely as do the nature and severity of the injury claimed.
We are unable to estimate the ultimate outcome of asbestos-related lawsuits, claims and proceedings due to the unpredictable nature of personal injury litigation. Despite this uncertainty, management believes that the ultimate resolution of these matters will not have a material adverse effect on U. S. Steel’s financial condition, although the resolution of such matters could significantly impact results of operations for a particular quarter. Among the factors considered in reaching this conclusion are: (1) it has been many years since U. S. Steel employed maritime workers or manufactured or sold asbestos containing products; (2) most asbestos containing material was removed or remediated at U. S. Steel facilities many years ago; and (3) U. S. Steel’s history of trial outcomes, settlements and dismissals.


F-52

Table of Contents

Environmental Matters U. S. Steel is subject to federal, state, local and foreign laws and regulations relating to the environment. These laws generally provide for control of pollutants released into the environment and require responsible parties to undertake remediation of hazardous waste disposal sites. Penalties may be imposed for noncompliance. Changes in accrued liabilities for remediation activities where U. S. Steel is identified as a named party are summarized in the following table:

 
 
Twelve Months Ended December 31,
(In millions)
 
2013
 
2012
Beginning of period
 
$
203

 
$
206

Accruals for environmental remediation deemed probable and reasonably estimable
 
45

 
13

Payments
 
(15
)
 
(16
)
End of period
 
$
233

 
$
203


Accrued liabilities for remediation activities are included in the following balance sheet lines:

(In millions)
 
December 31, 2013
 
December 31, 2012
Accounts payable
 
$
17

 
$
21

Deferred credits and other noncurrent liabilities
 
216

 
182

Total
 
$
233

 
$
203


Expenses related to remediation are recorded in cost of sales and totaled $45 million, $13 million and $36 million for the years ended December 31, 2013, 2012 and 2011, respectively. It is not presently possible to estimate the ultimate amount of all remediation costs that might be incurred or the penalties that may be imposed. Due to uncertainties inherent in remediation projects and the associated liabilities, it is possible that total remediation costs for active matters may exceed the accrued liabilities by as much as 10 to 25 percent.

Remediation Projects
U. S. Steel is involved in environmental remediation projects at or adjacent to several current and former U. S. Steel facilities and other locations that are in various stages of completion ranging from initial characterization through post-closure monitoring. Based on the anticipated scope and degree of uncertainty of projects, we categorize projects as follows:

(1)Projects with Ongoing Study and Scope Development are those projects which are still in the study and development phase. For these projects the extent of remediation that may be required is not yet known, the remediation methods and plans are not yet developed, and cost estimates cannot be determined. Therefore, significant costs, in addition to the accrued liabilities for these projects, are reasonably possible.

(2)Significant Projects with Defined Scope are those projects with significant accrued liabilities, a defined scope and little likelihood of significant additional costs.

(3)Other Projects are those projects with relatively small accrued liabilities for which we believe that, while additional costs are possible, they are not likely to be significant, and those projects for which we do not yet possess sufficient information to estimate potential costs to U. S. Steel.

Projects with Ongoing Study and Scope Development – There are five environmental remediation projects where reasonably possible additional costs for completion are not currently estimable, but could be material. These projects are four Resource Conservation and Recovery Act (RCRA) programs (at Fairfield Works, Lorain Tubular, ÁñÁ«ÊÓƵ-POSCO Industries (UPI) and the Fairless Plant) and a voluntary remediation program at the former steelmaking plant at Joliet, Illinois. As of December 31, 2013, accrued liabilities for these projects totaled $2 million for the costs of studies, investigations, interim measures, design and/or remediation. It is reasonably possible that additional liabilities associated with future requirements regarding studies, investigations, design and remediation for these projects could be as much as $25 million to $40 million.

Significant Projects with Defined Scope – As of December 31, 2013, a total of $54 million was accrued for projects at or related to Gary Works where the scope of work is defined.


F-53

Table of Contents

An additional project with defined scope greater than or equal to $5 million consists of a project at U. S. Steel’s former Geneva Works in Geneva, Utah. As of December 31, 2013, the accrued liability for this project totaled $64 million. U. S. Steel does not expect material additional costs related to this project.

Additionally, the expanded scope of the St. Louis Estuary and Upland project and SWMU #4 project at UPI were defined in the fourth quarter of 2013 and a $32 million charge and $7 million charge, respectively, was recorded for the remediation. As of December 31, 2013, the accrued liability for these projects totaled $52 million and $7 million, respectively.

Other Projects – There are six other environmental remediation projects which each had an accrued liability of between $1 million and $5 million. The total accrued liability for these projects at December 31, 2013 was $13 million. These projects have progressed through a significant portion of the design phase and material additional costs are not expected.

The remaining environmental remediation projects each had an accrued liability of less than $1 million. The total accrued liability for these projects at December 31, 2013 was $7 million. We do not foresee material additional liabilities for any of these sites.

Post-Closure Costs – Accrued liabilities for post-closure site monitoring and other costs at various closed landfills totaled $28 million at December 31, 2013 and were based on known scopes of work.

Administrative and Legal Costs – As of December 31, 2013, U. S. Steel had an accrued liability of $6 million for administrative and legal costs related to environmental remediation projects. These accrued liabilities were based on projected administrative and legal costs for the next three years and do not change significantly from year to year.

Capital Expenditures For a number of years, U. S. Steel has made substantial capital expenditures to bring existing facilities into compliance with various laws relating to the environment. In 2013 and 2012, such capital expenditures totaled $64 million and $53 million, respectively. U. S. Steel anticipates making additional such expenditures in the future; however, the exact amounts and timing of such expenditures are uncertain because of the continuing evolution of specific regulatory requirements.
CO2 Emissions – Current and potential regulation of greenhouse gas (GHG) emissions remains a significant issue for the steel industry, particularly for integrated steel producers such as U. S. Steel. The regulation of carbon dioxide (CO2) emissions has either become law or is being considered by legislative bodies of many nations, including countries where we have operating facilities. The European Union (EU) has established GHG regulations based upon national allocations and a cap and trade system. In Canada, both the federal and Ontario governments have issued proposed requirements for GHG emissions. In the United States, the Environmental Protection Agency (EPA) has published rules for regulating GHG emissions for certain facilities and has implemented various reporting requirements as further described below. In 2010, GHG legislation was passed in the House of Representatives and introduced in the Senate. The federal courts are considering several suits that challenge the EPA’s authority to regulate GHG emissions under the Clean Air Act (CAA). We do not know what action, if any, may be taken by the current or future sessions of Congress.
The European Commission (EC) has created an Emissions Trading System (ETS) and starting in 2013, the ETS began to employ centralized allocation, rather than national allocation plans, that are more stringent than the previous requirements. The ETS also includes a cap designed to achieve an overall reduction of GHGs for the ETS sectors of 21% in 2020 compared to 2005 emissions and auctioning as the basic principle for allocating emissions allowances, with some transitional free allocation provided on the basis of benchmarks for manufacturing industries under risk of carbon leakage. Manufacturing of sinter, coke oven products, basic iron and steel, ferro-alloys and cast iron tubes have all been recognized as exposing companies to a significant risk of carbon leakage, but the ETS is still expected to lead to additional costs for steel companies in Europe. The EU has imposed limitations under the ETS for the period 2013-2020 (Phase III) that are more stringent than those in NAP II, reducing the number of free allowances granted to companies to cover their CO2 emissions.
In September of 2013, the EC issued EU wide legislation further reducing the expected free allocation for Phase III by an average of approximately 12% for the Phase III period. The final allocation for the Phase III period that we received in January is approximately 48 million allowances. Based on 2013 emission intensity levels and projected future production levels and as a result of carryover allowances from the NAP II period, we do not currently expect to need to purchase credits until 2019 and currently estimate a shortfall of 14 million allowances

F-54

Table of Contents

for the Phase III period. However, due to a number of variable factors such as the future market value of allowances, future production levels and future emission intensity levels, we cannot reliably estimate the full cost of complying with the ETS regulations at this time.
On May 13, 2010, the EPA published its final Greenhouse Gas Tailoring Rule establishing a mechanism for regulating GHG emissions from facilities through the Clean Air Act’s Prevention of Significant Deterioration (PSD) permitting process. U. S. Steel reported its emissions under these rules in accordance with the regulation and its deadlines. Since 2011, new projects that increase GHG emissions by more than 75,000 tons per year have new PSD requirements based on best available control technology (BACT), but only if the project also significantly increases emissions of at least one non-GHG pollutant. Only existing sources with Title V permits or new sources obtaining Title V permits for non-GHG pollutants will also be required to address GHG emissions. As of July 1, 2011, new sources not already subject to Title V requirements that emit over 100,000 tons per year, or modifications to existing permits that increase GHG emissions by more than 75,000 tons per year, are subject to PSD and Title V requirements. On November 17, 2010 the EPA issued its “PSD and Title V Permitting Guidance for Greenhouse Gases” and “Available and Emerging Technologies for Reducing Greenhouse Gas Emissions from the Iron and Steel Industry.” With this guidance, EPA intends to help state and local air permitting authorities identify GHG reductions under the CAA. Additionally, the EPA revised the National Ambient Air Quality Standards (NAAQS) for nitrogen oxide, sulfur dioxide and lead in 2010 and is in the process of revising the NAAQS for 2.5 micron particulate matter, ozone and sulfur dioxides.
It is impossible to estimate the timing or impact of these or other future government action on U. S. Steel, although it could be significant. Such impacts may include substantial capital expenditures, costs for emission allowances, restriction of production, and higher prices for coking coal, natural gas and electricity generated by carbon based systems.
European Union (EU) Environmental Requirements – Slovakia is currently considering a law implementing an EU Waste Framework Directive that would more strictly regulate waste disposal and increase fees for waste disposed of in landfills including privately owned landfills. The intent of the waste directive is to encourage recycling but because Slovakia has not adopted implementing legislation, we cannot estimate the full financial impact of this prospective legislation at this time.
The EU’s Industry Emission Directive will require implementation of EU determined best available techniques (BATs) to reduce environmental impacts as well as compliance with BAT associated emission levels. This directive includes operational requirements for air emissions, wastewater discharges, solid waste disposal and energy conservation, dictates certain operating practices and imposes stricter emission limits. Producers will be required to be in compliance with the iron and steel BAT by March 8, 2016, unless specific extensions are granted by the Slovak environmental authority. We are currently evaluating the costs of complying with BAT, but our most recent broad estimate of likely capital expenditures is $200 million to $250 million over the 2014 to 2016 period. This amount has been reduced from prior estimates due to the exclusion of a project to upgrade our boilers at the power plant, which is discussed separately below, and because we now believe we can comply with certain of the BAT parameters without capital investments due to improved maintenance and operating practices. We are currently investigating the possibility of obtaining EU grants to fund a portion of these capital expenditures. We also believe there will be increased operating costs, such as increased energy and maintenance costs, but we are currently unable to reliably estimate them.
Due to other EU legislation, we will be required to make changes to the boilers at our steam and power generation plant in order to comply with stricter air emission limits. In January of 2014, the operation of ÁñÁ«ÊÓƵK's boilers was approved by the EC as part of Slovakia's Transitional National Plan (TNP) for bringing all boilers in Slovakia into BAT compliance by no later than 2020. The TNP establishes parameters for determining the date by which specific boilers are required to reach compliance with the new air standards, which has been determined to be October 2017 for our boilers. This gives us the flexibility of delaying the completion of the project to upgrade our boilers to no later than that date, although we may choose to accelerate the implementation of this project in order to qualify for supplementary support payments as part of Slovakia’s renewable energy program. This will result in a reduction in electricity costs once the project is completed. The current projected cost to reconstruct one existing boiler and build one new boiler to achieve compliance is broadly estimated at $150 million.
Environmental and other indemnifications – Throughout its history, U. S. Steel has sold numerous properties and businesses and many of these sales included indemnifications and cost sharing agreements related to the assets that were sold. These indemnifications and cost sharing agreements have related to the condition of the property, the approved use, certain representations and warranties, matters of title and environmental matters.

F-55

Table of Contents

While most of these provisions have not specifically dealt with environmental issues, there have been transactions in which U. S. Steel indemnified the buyer for non-compliance with past, current and future environmental laws related to existing conditions and there can be questions as to the applicability of more general indemnification provisions to environmental matters. Most recent indemnifications and cost sharing agreements are of a limited nature only applying to non-compliance with past and/or current laws. Some indemnifications and cost sharing agreements only run for a specified period of time after the transactions close and others run indefinitely. In addition, current owners of property formerly owned by U. S. Steel may have common law claims and contribution rights against U. S. Steel for environmental matters. The amount of potential environmental liability associated with these transactions and properties is not estimable due to the nature and extent of the unknown conditions related to the properties sold. Aside from the environmental liabilities already recorded as a result of these transactions due to specific environmental remediation activities and cases (included in the $233 million of accrued liabilities for remediation discussed above), there are no other known environmental liabilities related to these transactions.
Guarantees – The maximum guarantees of the indebtedness of unconsolidated entities of U. S. Steel totaled $29 million (which includes the recorded liability of $22 million noted below) at December 31, 2013. If any default related to the guaranteed indebtedness occurs, U. S. Steel has access to its interest in the assets of the investees to reduce its potential losses under the guarantees.
During the third quarter of 2013, U. S. Steel recorded a pretax charge of $22 million to net interest and other financial costs (see Note 5) to record a liability related to a guarantee of debt of an unconsolidated equity investment for which payment by U. S. Steel is probable. The $22 million is the maximum amount U. S. Steel would be obligated to pay as the guarantor and represents the fair value of the obligation at December 31, 2013.
Antitrust Class Actions – In a series of lawsuits filed in federal court in the Northern District of Illinois beginning September 12, 2008, individual direct or indirect buyers of steel products have asserted that eight steel manufacturers, including U. S. Steel, conspired in violation of antitrust laws to restrict the domestic production of raw steel and thereby to fix, raise, maintain or stabilize the price of steel products in the United States. The cases are filed as class actions and claim damages related to steel product purchases during the time period of April 1, 2005 to December 31, 2007.  A hearing on class certification is expected during the first quarter of 2014. U. S. Steel is vigorously defending these lawsuits and does not believe that it is probable a liability regarding these matters has been incurred. We are unable to estimate a range of possible loss at this time.
EPA Region V Federal Lawsuit – On August 1, 2012, the U.S. government, joined by the States of Illinois, Indiana and Michigan, filed a complaint in the Northern District of Indiana alleging various CAA and State air regulatory violations that were to have allegedly occurred at Gary Works, Granite City Works, and Great Lakes Works, our three integrated iron and steel facilities located in EPA Region V. The Complaint alleges that Gary Works failed to obtain the proper pre-construction permit for a routine reline of its Blast Furnace No. 4 in 1990, and that the three facilities failed to meet certain operational, maintenance, opacity, and recordkeeping requirements under the CAA and its implementing regulations. The Complaint requests relief in the form of statutory penalties for each violation and for injunctive relief. U. S. Steel believes that the claims asserted in the Complaint are not justified and are without statutory foundation. On September 21, 2012, U. S. Steel filed a motion to dismiss the U.S. government’s claims for relief regarding the 1990 reline of the Gary Blast Furnace No. 4 and filed an answer to the remaining allegations in the Complaint. On August 21, 2013, the district court issued an Opinion and Order, granting in part, and denying in part, the Motion to Dismiss. The court granted the Motion to Dismiss with respect to penalties such that the government is barred from seeking any civil penalties. However, the court denied our Motion to Dismiss with respect to injunctive relief. On September 6, 2013, U. S. Steel filed a Motion for Reconsideration to the district court with respect to its denial of the Motion to Dismiss regarding injunctive relief. On November 5, 2013, the Court heard oral arguments regarding U. S. Steel’s Motion for Reconsideration and to date, no ruling has been issued. In the interim, the parties are continuing with discovery. Fact discovery is being completed in three phases, consisting of one phase for each facility. The first phase of fact discovery, regarding Granite City Works, was completed on December 20, 2013. U. S. Steel will continue to vigorously defend against these claims. At this time, the potential outcome is not reasonably estimable.
Randle Reef – The Canadian and Ontario governments have identified for remediation a sediment deposit, commonly referred to as Randle Reef, in Hamilton Harbor near ÁñÁ«ÊÓƵC’s Hamilton Works, for which the regulatory agencies estimate expenditures with a net present value of approximately C$120 million (approximately $113 million). The national and provincial governments have each allocated C$40 million (approximately $38 million) for this project. Local sources, including industry, have also agreed to provide funding of C$40 million (approximately $38 million) for this project. ÁñÁ«ÊÓƵC has committed to contribute approximately 11,000 tons of hot

F-56

Table of Contents

rolled steel and to fund C$2 million (approximately $2 million). The C$2 million (approximately $2 million) was contributed in 2013 and the steel contribution is expected to be made in 2014. As of December 31, 2013, the remaining contribution commitment is reflected on ÁñÁ«ÊÓƵC's balance sheet as a current liability of approximately C$8 million (approximately $8 million).
Other contingencies Under certain operating lease agreements covering various equipment, U. S. Steel has the option to renew the lease or to purchase the equipment at the end of the lease term. If U. S. Steel does not exercise the purchase option by the end of the lease term, U. S. Steel guarantees a residual value of the equipment as determined at the lease inception date (totaling approximately $15 million at December 31, 2013). No liability has been recorded for these guarantees as the potential loss is not probable.
Insurance U. S. Steel maintains insurance for certain property damage, equipment, business interruption and general liability exposures; however, insurance is applicable only after certain deductibles and retainages. U. S. Steel is self-insured for certain other exposures including workers’ compensation (where permitted by law) and auto liability. Liabilities are recorded for workers’ compensation and personal injury obligations. Other costs resulting from losses under deductible or retainage amounts or not otherwise covered by insurance are charged against income upon occurrence.
U. S. Steel uses surety bonds, trusts and letters of credit to provide whole or partial financial assurance for certain obligations such as workers’ compensation. The total amount of active surety bonds, trusts and letters of credit being used for financial assurance purposes was approximately $166 million as of December 31, 2013, which reflects U. S. Steel’s maximum exposure under these financial guarantees, but not its total exposure for the underlying obligations. A significant portion of our trust arrangements and letters of credit are collateralized by our Receivables Purchase Agreement. The remaining trust arrangements and letters of credit are collateralized by restricted cash. Restricted cash, which is recorded in other current and noncurrent assets, totaled $81 million at December 31, 2013, of which less than $1 million was classified as current, and $181 million at December 31, 2012, of which $5 million was classified as current. Restricted cash at December 31, 2013 also includes $43 million to fund certain capital projects at Gary Works, our Clairton Plant and Granite City Works. The proceeds become unrestricted as capital expenditures for these projects are made.
Capital Commitments At December 31, 2013, U. S. Steel’s contractual commitments to acquire property, plant and equipment totaled $151 million.
Contractual Purchase Commitments – U. S. Steel is obligated to make payments under contractual purchase commitments, including unconditional purchase obligations. Payments for contracts with remaining terms in excess of one year are summarized below (in millions):


2014
 
2015
 
2016
 
2017
 
2018
 
Later years
 
Total
$854
 
$644
 
$411
 
$326
 
$296
 
$1,443
 
$3,974

The majority of U. S. Steel’s unconditional purchase obligations relate to the supply of industrial gases, certain energy and utility services with terms ranging from two to 15 years. Unconditional purchase obligations also include coke and steam purchase commitments related to a coke supply agreement with Gateway Energy & Coke Company LLC (Gateway) under which Gateway is obligated to supply 90 percent to 105 percent of the expected annual capacity of the heat recovery coke plant, and U. S. Steel is obligated to purchase the coke from Gateway at the contract price. As of December 31, 2013, a maximum default payment of approximately $250 million would apply if U. S. Steel terminates the agreement.

Total payments relating to unconditional purchase obligations were approximately $750 million in 2013, $730 million in 2012 and $740 million in 2011.

F-57

Table of Contents

SELECTED QUARTERLY FINANCIAL DATA (Unaudited)

 
 
2013
 
2012
(In millions, except per share data)
 
4th Qtr.
 
3rd Qtr.
 
2nd Qtr.
 
1st Qtr.
 
4th Qtr.
 
3rd Qtr.
 
2nd Qtr.
 
1st Qtr.
Net sales
 
$
4,269

 
$
4,131

 
$
4,429

 
$
4,595

 
$
4,487

 
$
4,652

 
$
5,017

 
$
5,172

Segment income (loss) from operations:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Flat-rolled
 
87

 
82

 
(51
)
 
(13
)
 
11

 
29

 
177

 
183

ÁñÁ«ÊÓƵE(a)
 
12

 
(32
)
 
10

 
38

 
7

 
27

 
34

 
(34
)
Tubular
 
32

 
49

 
45

 
64

 
32

 
102

 
103

 
129

Total reportable segments
 
$
131

 
$
99

 
$
4

 
$
89

 
$
50

 
$
158

 
$
314

 
$
278

Other Businesses
 
15

 
14

 
43

 
5

 
9

 
13

 
16

 
17

Items not allocated to segments
 
(375
)
 
(1,815
)
 
(54
)
 
(56
)
 
(54
)
 
(109
)
 
(77
)
 
(368
)
Total (loss) income from operations
 
$
(229
)
 
$
(1,702
)
 
$
(7
)
 
$
38

 
$
5

 
$
62

 
$
253

 
$
(73
)
Net income (loss)
 
270

 
(1,791
)
 
(78
)
 
(73
)
 
(51
)
 
44

 
101

 
(219
)
Net income (loss) attributable to ÁñÁ«ÊÓƵ
 
$
270

 
$
(1,791
)
 
$
(78
)
 
$
(73
)
 
$
(50
)
 
$
44

 
$
101

 
$
(219
)
Common stock data
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Net income (loss) per share attributable to ÁñÁ«ÊÓƵ
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
- Basic
 
$
1.87

 
$
(12.38
)
 
$
(0.54
)
 
$
(0.51
)
 
$
(0.35
)
 
$
0.30

 
$
0.70

 
$
(1.52
)
- Diluted
 
$
1.75

 
$
(12.38
)
 
$
(0.54
)
 
$
(0.51
)
 
$
(0.35
)
 
$
0.28

 
$
0.62

 
$
(1.52
)
Dividends paid per share
 
$
0.05

 
$
0.05

 
$
0.05

 
$
0.05

 
$
0.05

 
$
0.05

 
$
0.05

 
$
0.05

Price range of common stock
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
- Low
 
$
20.44

 
$
16.86

 
$
15.80

 
$
19.19

 
$
18.74

 
$
17.80

 
$
17.67

 
$
24.78

- High
 
$
30.47

 
$
21.68

 
$
19.70

 
$
26.29

 
$
24.78

 
$
23.84

 
$
30.66

 
$
32.52

(a)
Includes the results of U. S. Steel Serbia through the disposition date of January 31, 2012. See Note 4 to the Consolidated Financial Statements.

F-58

Table of Contents

SUPPLEMENTARY INFORMATION ON MINERAL RESERVES OTHER THAN OIL AND GAS

(Unaudited)

Mineral Reserves

U. S. Steel operates two surface iron ore mining complexes in Minnesota consisting of the Minntac Mine and Pellet Plant and the Keetac Mine and Pellet Plant. U. S. Steel owns interests in the iron ore mining assets of Tilden Mining Company, L.C. and Hibbing Taconite Company.

The following table provides a summary of our reserves and minerals production by mining complex:

 
 
Proven and Probable Reserves
As of December 31, 2013
 
Production
(Millions of short tons)
 
Owned
 
Leased
 
Total
 
2013
 
2012
 
2011
Iron ore pellets:
 
 
 
 
 
 
 
 
 
 
 
 
Minntac Mine and Pellet Plant
 
125

 
416

 
541

 
16.1

 
15.6

 
15.6

Keetac Mine and Pellet Plant
 
19

 
373

 
392

 
5.6

 
5.8

 
5.5

Tilden Mining Company, L.C.*
 
40

 

 
40

 
1.1

 
1.5

 
1.4

Hibbing Taconite Company*
 

 
12

 
12

 
1.3

 
1.4

 
1.3

Total
 
184

 
801

 
985

 
24.1

 
24.3

 
23.8

*
Represents U. S. Steel’s proportionate share of proven and probable reserves and production as these investments are unconsolidated equity affiliates.

Iron Ore Reserves
Reserves are defined by SEC Industry Standard Guide 7 as that part of a mineral deposit that could be economically and legally extracted and produced at the time of the reserve determination. The estimate of proven and probable reserves is of recoverable tons. Recoverable tons mean the tons of product that can be used internally or delivered to a customer after considering mining and beneficiation or preparation losses. Neither inferred reserves nor resources that exist in addition to proven and probable reserves were included in these figures. At December 31, 2013, all 985 million tons of proven and probable reserves are assigned, which means that they have been committed by U. S. Steel to its operating mines and are of blast furnace pellet grade.

U. S. Steel estimates its iron ore reserves using exploration drill holes, physical inspections, sampling, laboratory testing, 3-D computer models, economic pit analysis and fully-developed pit designs for its operating mines. These estimates are reviewed and reassessed from time to time. The most recent such review for our Keetac operating mine was completed in 2013 and resulted in an increase in the proven and probable reserves primarily due to additional exploration drilling and development of an economic computerized mine plan. The most recent review for our Minntac operating mine was conducted in 2005 and led U. S. Steel to reduce its determination of proven and probable reserves mainly due to excluding areas where sampling and measurement did not meet its new 600-foot drill spacing standard, based on updated geostatistical studies. Estimates for our share of unconsolidated equity affiliates are based upon information supplied by the joint ventures. The most recent such review for Tilden Mining Company, L.C. was conducted in 2011 and resulted in a de minimis decrease in proven and probable reserves. The most recent review for Hibbing Taconite Company was conducted in 2012 and resulted in a decrease in proven and probable reserves.

F-59

Table of Contents

FIVE-YEAR OPERATING SUMMARY (Unaudited)

(Thousands of tons, unless otherwise noted)
 
2013
 
2012
 
2011
 
2010
 
2009
Raw Steel Production
 
 
 
 
 
 
 
 
 
 
Gary, IN
 
6,396

 
6,230

 
6,312

 
5,598

 
5,379

Great Lakes, MI
 
2,883

 
2,839

 
2,841

 
3,095

 
473

Mon Valley, PA
 
2,918

 
2,835

 
2,746

 
2,701

 
2,460

Granite City, IL
 
2,538

 
2,421

 
2,453

 
2,539

 
906

Fairfield, AL
 
1,943

 
2,341

 
1,912

 
2,095

 
1,586

Lake Erie, Ontario, Canada
 
1,189

 
2,450

 
2,336

 
1,052

 
356

Hamilton, Ontario, Canada(a)
 

 

 

 
1,363

 
564

Total Flat-rolled facilities
 
17,867

 
19,116

 
18,600

 
18,443

 
11,724

U. S. Steel Košice
 
4,598

 
4,434

 
4,201

 
4,706

 
3,897

U. S. Steel Serbia(b)
 

 
88

 
1,439

 
1,383

 
1,180

Total ÁñÁ«ÊÓƵE facilities
 
4,598

 
4,522

 
5,640

 
6,089

 
5,077

Total
 
22,465

 
23,638

 
24,240

 
24,532

 
16,801

Raw Steel Capability
 
 
 
 
 
 
 
 
 
 
Flat-rolled(a)
 
24,300

 
24,300

 
24,300

 
24,300

 
24,300

ÁñÁ«ÊÓƵE
 
5,000

 
5,000

 
7,400

 
7,400

 
7,400

Total
 
29,300

 
29,300

 
31,700

 
31,700

 
31,700

Production as % of total capability:
 
 
 
 
 
 
 
 
 
 
Flat-rolled
 
74
%
 
78
%
 
77
%
 
76
%
 
48
%
ÁñÁ«ÊÓƵE
 
92
%
 
87
%
 
76
%
 
82
%
 
69
%
Coke Production
 
 
 
 
 
 
 
 
 
 
Flat-rolled
 
6,494

 
6,156

 
6,144

 
5,792

 
3,969

ÁñÁ«ÊÓƵE
 
1,508

 
1,537

 
1,486

 
1,506

 
1,446

Total
 
8,002

 
7,693

 
7,630

 
7,298

 
5,415

Iron Ore Pellet Production(c)
 
 
 
 
 
 
 
 
 
 
Total
 
24,151

 
24,271

 
23,779

 
22,441

 
9,293

Steel Shipments by Segment(d)
 
 
 
 
 
 
 
 
 
 
Flat-rolled
 
14,644

 
15,974

 
15,509

 
15,301

 
9,861

ÁñÁ«ÊÓƵE
 
4,000

 
3,816

 
4,932

 
5,464

 
4,463

Tubular
 
1,757

 
1,886

 
1,812

 
1,551

 
657

Total steel shipments
 
20,401

 
21,676

 
22,253

 
22,316

 
14,981

Average Steel Price Per Ton
 
 
 
 
 
 
 
 
 
 
Flat-rolled
 
$
735

 
$
750

 
$
759

 
$
675

 
$
651

ÁñÁ«ÊÓƵE
 
$
706

 
$
742

 
$
845

 
$
705

 
$
637

Tubular
 
$
1,530

 
$
1,687

 
$
1,612

 
$
1,494

 
$
1,755

(a)
On December 31, 2013, U. S. Steel permanently shut down its iron and steelmaking facilities at Hamilton Works reducing Flat-rolled's annual raw steel capability to 22.0 million tons.
(b)
On January 31, 2012, U. S. Steel sold U. S. Steel Serbia.
(c)
Includes our share of production from Hibbing, Tilden and Wabush. On February 1, 2010, U. S. Steel sold its interest in Wabush.
(d)
Does not include shipments by joint ventures and other equity investees of U. S. Steel, but instead reflects the shipments of substrate materials, primarily hot-rolled and cold-rolled sheets, to those entities.



F-60

Table of Contents

FIVE-YEAR OPERATING SUMMARY (Unaudited) (Continued)

(Thousands of net tons)
 
2013
 
2012
 
2011
 
2010
 
2009
Steel Shipments by Market - North American Facilities(a)
 
 
 
 
 
 
 
 
 
 
Steel service centers
 
2,721

 
2,882

 
2,987

 
3,214

 
1,999

Further conversion:
 
 
 
 
 
 
 
 
 
 
Trade customers
 
4,409

 
5,119

 
4,799

 
4,256

 
2,214

Joint ventures
 
1,664

 
1,823

 
1,803

 
1,835

 
1,283

Transportation (including automotive)
 
2,480

 
2,511

 
2,268

 
2,139

 
1,262

Construction and construction products
 
905

 
1,013

 
998

 
859

 
675

Containers
 
1,259

 
1,290

 
1,221

 
1,398

 
1,296

Appliances & electrical equipment
 
666

 
727

 
651

 
703

 
755

Oil, gas and petrochemicals
 
1,540

 
1,601

 
1,526

 
1,438

 
619

Export from the United States
 
450

 
550

 
736

 
746

 
322

All other
 
307

 
344

 
332

 
264

 
93

Total
 
16,401

 
17,860

 
17,321

 
16,852

 
10,518

Steel Shipments by Market - ÁñÁ«ÊÓƵE
 
 
 
 
 
 
 
 
 
 
Steel service centers
 
560

 
567

 
943

 
1,106

 
882

Further conversion:
 
 
 
 
 
 
 
 
 
 
Trade customers
 
286

 
310

 
539

 
676

 
461

Transportation (including automotive)
 
709

 
650

 
707

 
629

 
387

Construction and construction products
 
1,501

 
1,350

 
1,622

 
1,764

 
1,615

Containers
 
393

 
387

 
525

 
586

 
517

Appliances & electrical equipment
 
275

 
272

 
328

 
319

 
248

Oil, gas and petrochemicals
 
15

 
20

 
14

 
11

 
17

All other
 
261

 
260

 
254

 
373

 
336

Total
 
4,000

 
3,816

 
4,932

 
5,464

 
4,463

(a)
Does not include shipments by joint ventures and other equity investees of U. S. Steel, but instead reflects the shipments of substrate materials, primarily hot-rolled and cold-rolled sheets, to those entities.


F-61

Table of Contents

FIVE-YEAR FINANCIAL SUMMARY (Unaudited)
 
(Dollars in millions, except per share amounts)
 
2013
 
2012
 
2011
 
2010
 
2009
Net sales by segment:
 
 
 
 
 
 
 
 
 
 
Flat-rolled
 
$
12,830

 
$
14,555

 
$
13,727

 
$
11,860

 
$
7,145

ÁñÁ«ÊÓƵE(a)
 
2,944

 
3,094

 
4,375

 
4,037

 
2,947

Tubular
 
2,777

 
3,291

 
3,041

 
2,408

 
1,221

Total reportable segments
 
$
18,551

 
$
20,940

 
$
21,143

 
$
18,305

 
$
11,313

Other Businesses
 
273

 
327

 
522

 
432

 
292

Intersegment sales
 
(1,400
)
 
(1,939
)
 
(1,781
)
 
(1,363
)
 
(557
)
Total
 
$
17,424

 
$
19,328

 
$
19,884

 
$
17,374

 
$
11,048

Segment income (loss):
 
 
 
 
 
 
 
 
 
 
Flat-rolled(b)
 
$
105

 
$
400

 
$
469

 
$
(261
)
 
$
(1,399
)
ÁñÁ«ÊÓƵE(a)
 
28

 
34

 
(162
)
 
(33
)
 
(208
)
Tubular(b)
 
190

 
366

 
316

 
353

 
60

Total reportable segments(b)
 
$
323

 
$
800

 
$
623

 
$
59

 
$
(1,547
)
Other Businesses(b)
 
77

 
55

 
46

 
55

 

Items not allocated to segments(b)
 
(2,300
)
(c) 
(608
)
 
(404
)
 
(225
)
 
(137
)
Total (loss) income from operations
 
$
(1,900
)
 
$
247

 
$
265

 
$
(111
)
 
$
(1,684
)
Net interest and other financial costs
 
332

 
241

 
238

 
274

 
161

Income tax (benefit) provision
 
(560
)
 
131

 
80

 
97

 
(439
)
Net (loss) income attributable to ÁñÁ«ÊÓƵ
 
$
(1,672
)
 
$
(124
)
 
$
(53
)
 
$
(482
)
 
$
(1,401
)
Per common share:
 
 
 
 
 
 
 
 
 
 
- Basic
 
$
(11.56
)
 
$
(0.86
)
 
$
(0.37
)
 
$
(3.36
)
 
$
(10.42
)
- Diluted
 
$
(11.56
)
 
$
(0.86
)
 
$
(0.37
)
 
$
(3.36
)
 
$
(10.42
)
(a)
Includes the results of ÁñÁ«ÊÓƵS through the disposition date of January 31, 2012. See Note 4 to the Consolidated Financial Statements.
(b)
Amounts prior to 2011 have been restated to reflect a change in our segment allocation methodology for postretirement benefit expenses as disclosed in Note 3 to the Consolidated Financial Statements.
(c)
Includes goodwill impairment charge of $1.8 billion in 2013. See Note 11 to the Consolidated Financial Statements.


F-62

Table of Contents

FIVE-YEAR FINANCIAL SUMMARY (Unaudited) (Continued)


 
2013
 
2012
 
2011
 
2010
 
2009
 
Balance Sheet Position at Year-End (dollars in millions)
 
 
 
 
 
 
 
 
 
 
 
Current assets
 
$
6,078

 
$
5,496

 
$
5,774

 
$
5,304

 
$
5,015

 
Net property, plant & equipment
 
5,922

 
6,408

 
6,579

 
6,486

 
6,820

 
Total assets
 
13,143

 
15,217

 
16,073

 
15,350

 
15,422

 
Short-term debt and current maturities of long-term debt
 
323

 
2

 
400

 
216

 
19

 
Other current liabilities
 
2,922

 
2,988

 
3,249

 
2,931

 
2,455

 
Long-term debt
 
3,616

 
3,936

 
3,828

 
3,517

 
3,345

 
Employee benefits
 
2,064

 
4,416

 
4,600

 
4,365

 
4,143

 
Total ÁñÁ«ÊÓƵ stockholders’ equity
 
3,348

 
3,477

 
3,500

 
3,851

 
4,676

 
Cash Flow Data (dollars in millions)
 
 
 
 
 
 
 
 
 
 
 
Net cash provided by (used in) operating activities
 
$
414

 
$
1,135

 
$
168

 
$
(379
)
 
$
(61
)
 
Capital expenditures
 
477

 
723

 
848

 
676

 
472

 
Dividends paid
 
29

 
29

 
29

 
29

 
56

 
Employee Data
 
 
 
 
 
 
 
 
 
 
 
Total employment costs (dollars in millions)
 
$
3,611


$
3,710

(a) 
$
3,656

 
$
3,144

 
$
2,814

(b) 
Average North America employment costs (dollars per hour)
 
$
55.06

 
$
56.47

 
$
57.06

 
$
51.47

 
$
56.24

(b) 
Average number of North America employees
 
25,621

 
25,925

 
24,207

 
23,197

 
20,635

 
Average number of ÁñÁ«ÊÓƵE employees
 
12,470


12,858

(a) 
18,531

 
18,623

 
19,281

 
Number of pensioners at year-end
 
68,221

 
70,822

 
74,270

 
77,203

 
78,948

 
Stockholder Data at Year-End
 
 
 
 
 
 
 
 
 
 
 
Common shares outstanding, net of treasury shares (millions)
 
144.7

 
144.3

 
144.0

 
143.7

 
143.4

 
Registered shareholders (thousands)
 
16.8

 
17.8

 
18.5

 
19.3

 
20.3

 
Market price of common stock
 
$
29.50

 
$
23.85

 
$
26.46

 
$
58.42

 
$
55.12

 
(a)
The 2012 average is reflective of the average number of employees at ÁñÁ«ÊÓƵK only. ÁñÁ«ÊÓƵS employed 5,350 individuals for the month of January 2012 at a total cost of approximately $1 million, which is not reflected in this amount. ÁñÁ«ÊÓƵS was sold on January 31, 2012.
(b)
Includes charges of $93 million for defined benefit pension and other benefit charges related to voluntary early retirement programs and $87 million associated with benefit costs related to the temporary idling of certain facilities and reduced production at others.

F-63

Table of Contents

Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.


92

Table of Contents

Item 9A. CONTROLS AND PROCEDURES

Conclusions Regarding the Effectiveness of Disclosure Controls and Procedures

Under the supervision and with the participation of U. S. Steel’s management, including the chief executive officer and chief financial officer, U. S. Steel conducted an evaluation of our disclosure controls and procedures, as such term is defined under Rule 13a-15(e) promulgated under the Securities Exchange Act of 1934, as amended (the Exchange Act). Based on this evaluation, U. S. Steel’s chief executive officer and chief financial officer concluded that U. S. Steel’s disclosure controls and procedures were effective as of the end of the period covered by this annual report.

Management’s Report on Internal Control Over Financial Reporting

See “Item 8. Financial Statements and Supplementary Data – Management’s Reports to Stockholders – Internal Control Over Financial Reporting.”

Attestation Report of Independent Registered Public Accounting Firm

See “Item 8. Financial Statements and Supplementary Data – Report of Independent Registered Public Accounting Firm.”

Changes in Internal Control Over Financial Reporting

There have not been any changes in U. S. Steel’s internal control over financial reporting that occurred during the fourth quarter of 2013 which have materially affected, or are reasonably likely to materially affect, U. S. Steel’s internal control over financial reporting.

Item 9B. OTHER INFORMATION

None.

93

Table of Contents

PART III

Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

Information concerning the directors of U. S. Steel required by this item is incorporated and made part hereof by reference to the material appearing under the heading “Election of Directors” in U. S. Steel’s Proxy Statement for the 2014 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission, pursuant to Regulation 14A, no later than 120 days after the end of the fiscal year. Information concerning the Audit Committee and its financial expert required by this item is incorporated and made part hereof by reference to the material appearing under the heading “The Board of Directors and its Committees – Audit Committee” in U. S. Steel’s Proxy Statement for the 2014 Annual Meeting of Stockholders. Information regarding the Nominating Committee required by this item is incorporated and made part hereof by reference to the material appearing under the heading “The Board of Directors and its Committees – Corporate Governance & Public Policy Committee” in U. S. Steel’s Proxy Statement for the 2014 Annual Meeting of Stockholders. Information regarding the ability of stockholders to communicate with the Board of Directors is incorporated and made part hereof by reference to the material appearing under the heading “Communications from Security Holders and Interested Parties” in U. S. Steel’s Proxy Statement for the 2014 Annual Meeting of Stockholders. Information regarding compliance with Section 16(a) of the Exchange Act required by this item is incorporated and made part hereof by reference to the material appearing under the heading “Section 16(a) Beneficial Ownership Reporting Compliance” in U. S. Steel’s Proxy Statement for the 2014 Annual Meeting of Stockholders. Information concerning the executive officers of U. S. Steel is contained in Part I of this Form 10-K under the caption “Executive Officers of the Registrant.”

U. S. Steel has adopted a Code of Ethical Business Conduct that applies to all of our directors and officers, including our principal executive officer, principal financial officer, principal accounting officer or controller, or persons performing similar functions. U. S. Steel will provide a copy of this code free of charge upon request. To obtain a copy, contact the Office of the Corporate Secretary, ÁñÁ«ÊÓƵ, 600 Grant Street, Pittsburgh, Pennsylvania 15219-2800 (telephone: 412-433-2998). The Code of Ethical Business Conduct is also available through the Company’s website at www.ussteel.com. U. S. Steel does not intend to incorporate the contents of our website into this Annual Report on Form 10-K.

Item 11. EXECUTIVE COMPENSATION

Information required by this item is incorporated and made part hereof by reference to the material appearing under the headings “Executive Compensation” and “Compensation & Organization Committee Report” in U. S. Steel’s Proxy Statement for the 2014 Annual Meeting of Stockholders.

Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

Equity Compensation Plan Information

Plan Category
 
(1) Number of securities
to be issued upon
exercise of  outstanding
options, warrants and
rights
 
(2) Weighted-average
exercise price of
outstanding options,
warrants and rights
 
(3) Number of securities
remaining available  for
future issuance under
equity compensation
plans (excluding
securities reflected in
Column (1))
Equity compensation plans approved by security holders(a)
 
7,862,465
 
$37.66
 
2,609,897(b)
Equity compensation plans not approved by security holders(c)
 
27,819
 
(one for one)
 
Total
 
7,890,284
 
 
2,609,897
(a)
The numbers in columns (1) and (2) of this row contemplate all shares that could potentially be issued as a result of outstanding grants under the 2005 Stock Incentive Plan as of December 31, 2013. (For more information, see Note 12 to the Consolidated Financial Statements.) Column (1) includes (i) 162,967 shares of common stock that could be issued for the Common Stock Units outstanding under the Deferred Compensation Program for Non-Employee Directors and (ii) 999,952 shares that could be issued for the 499,976 performance awards outstanding under the Long-Term Incentive Compensation Program (a program under the 2005 Stock Incentive Plan). The calculation in column (2) does not include the Common Stock Units since the weighted average exercise price for Common Stock Units is one for one; that is, one share of common stock will be given in exchange for each unit of such phantom stock accumulated through the date of the director’s retirement. Also, the calculation in column (2) does not include the performance awards since the weighted average exercise price for performance awards can range from zero for one to two for one; that is, performance awards may result in up to 999,952 shares of common stock being issued (two for one), or some lesser number of shares (including zero shares of common stock issued), depending upon the Corporation’s common stock performance versus that of a peer group of companies.

94

Table of Contents

(b)
Represents shares available under the 2005 Stock Incentive Plan.
(c)
At December 31, 2013, U. S. Steel had no securities remaining for future issuance under equity compensation plans that had not been approved by security holders. Column (1) represents Common Stock Units that were issued pursuant to the Deferred Compensation Plan for Non-Employee Directors prior to its being amended to make it a program under the 2005 Stock Incentive Plan. The weighted average exercise price for Common Stock Units in column (2) is one for one; that is, one share of common stock will be given in exchange for each unit of phantom stock upon the director’s retirement from the Board of Directors. All future grants under this amended plan/program will count as shares issued pursuant to the 2005 Stock Incentive Plan, a shareholder approved plan.

Other information required by this item is incorporated and made part hereof by reference to the material appearing under the headings “Security Ownership of Directors and Executive Officers” and “Security Ownership of Certain Beneficial Owners” in U. S. Steel’s Proxy Statement for the 2014 Annual Meeting of Stockholders.

Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

Information required by this item is incorporated and made part hereof by reference to the material appearing under the headings “Policy with Respect to Related Person Transactions” and “The Board of Directors and its Committees – Independence” in U. S. Steel’s Proxy Statement for the 2014 Annual Meeting of Stockholders.

Item 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES

Information required by this item is incorporated and made part hereof by reference to the material appearing under the heading “Information Regarding the Independence of the Independent Registered Public Accounting Firm” in U. S. Steel’s Proxy Statement for the 2014 Annual Meeting of Stockholders.

95

Table of Contents

PART IV

Item 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULE

A. Documents Filed as Part of the Report

1.    Financial Statements
Financial Statements filed as part of this report are included in “Item 8 – Financial Statements and Supplementary Data” beginning on page F-1.

2.    Financial Statement Schedules and Supplementary Data
“Schedule II – Valuation and Qualifying Accounts and Reserves” is included on page 103. All other schedules are omitted because they are not applicable or the required information is contained in the applicable financial statements or notes thereto.

“Supplementary Data – Disclosures About Forward-Looking Statements” is provided beginning on
page 107.

B. Exhibits

Exhibits 10(a) through 10(l) and Exhibits 10(y) through 10(rr) are management contracts or compensatory plans or arrangements.

Exhibit No.

2.    Plan of acquisition, reorganization, arrangement, liquidation or succession
(a)
Master Share Purchase Agreement by and between U. S. Steel Serbia B.V. and U. S. Steel Košice s.r.o., wholly owned subsidiaries of U. S. Steel, and the Republic of Serbia.
 
Incorporated by reference to Exhibit 2.1 to United States Steel Corporation’s Form 8-K filed on February 6, 2012, Commission File Number 1-16811.

3.    Articles of Incorporation and By-Laws
(a)
ÁñÁ«ÊÓƵ Restated Certificate of Incorporation dated September 30, 2003.
 
Incorporated by reference to Exhibit 3.1 to United States Steel Corporation’s Form 10-Q for the quarter ended September 30, 2003, Commission File Number 1-16811.
 
 
 
(b)
Amended and Restated By-Laws of ÁñÁ«ÊÓƵ dated as of January 28, 2014
 
Incorporated by reference to Exhibit 3.1 to ÁñÁ«ÊÓƵ's Form 8-K filed on January 31, 2014, Commission File Number 1-16811.
 
 
 
 
4.    Instruments Defining the Rights of Security Holders, Including Indentures
(a)
Second Amended and Restated Credit Agreement dated as of June 12, 2009 and amended and restated as of July 20, 2011 among ÁñÁ«ÊÓƵ, the Lenders party thereto, the LC Issuing Banks party thereto, and JPMorgan Chase Bank, N.A., as Administrative Agent and Collateral Agent.
 
Incorporated by reference to Exhibit 10.2 to United States Steel Corporation’s Form 8-K filed on July 21, 2011, Commission File Number 1-16811.
 
 
 
(b)
Indenture dated as of May 21, 2007 between ÁñÁ«ÊÓƵ and The Bank of New York Mellon, formerly known as The Bank of New York.
 
Incorporated by reference to Exhibit 4.1 to United States Steel Corporation’s Form 8-K filed on May 22, 2007, Commission File Number 1-16811.
 
 
 
 

96

Table of Contents

(c)
First Supplemental Indenture dated as of May 21, 2007, between ÁñÁ«ÊÓƵ and The Bank of New York Mellon, formerly known as The Bank of New York, regarding 5.65% Senior Notes due June 1, 2013, 6.05% Senior Notes due June 1, 2017 and 6.65% Senior Notes due June 1, 2037.
 
Incorporated by reference to Exhibit 4.2 to United States Steel Corporation’s Form 8-K filed on May 22, 2007, Commission File Number 1-16811.
 
 
 
(d)
Second Supplemental Indenture dated as of December 10, 2007, between ÁñÁ«ÊÓƵ and The Bank of New York Mellon, formerly known as The Bank of New York, regarding 7.00% Senior Notes due February 1, 2018.
 
Incorporated by reference to Exhibit 4.1 to United States Steel Corporation’s Form 8-K filed on December 10, 2007, Commission File Number 1-16811.
 
 
 
 
(e)
Third Supplemental Indenture dated as of May 4, 2009, between ÁñÁ«ÊÓƵ and The Bank of New York Mellon, formerly known as The Bank of New York, regarding 4.00% Senior Convertible Notes due May 15, 2014.
 
Incorporated by reference to Exhibit 4.1 to United States Steel Corporation’s Form 8-K filed on May 5, 2009, Commission File Number 1-16811.
 
 
 
(f)
Fourth Supplemental Indenture dated as of March 19, 2010, between ÁñÁ«ÊÓƵ and The Bank of New York Mellon, formerly known as The Bank of New York, regarding 7.375% Senior Notes due April 1, 2020.
 
Incorporated by reference to Exhibit 4.1 to United States Steel Corporation’s Form 8-K filed on March 23, 2010, Commission File Number 1-16811.
 
 
 
(g)
Fifth Supplemental Indenture dated as of March 15, 2012, between ÁñÁ«ÊÓƵ and The Bank of New York Mellon, formerly known as The Bank of New York, regarding 7.50% Senior Notes due March 15, 2022.
 
Incorporated by reference to Exhibit 4.1 to United States Steel Corporation’s Form 8-K filed on March 16, 2012, Commission File Number 1-16811.
 
 
 
(h)
Sixth Supplemental Indenture dated as of March 26, 2013, between ÁñÁ«ÊÓƵ and The Bank of New York Mellon, formerly known as The Bank of New York, regarding 6.875% Senior Notes due April 1, 2021.
 
Incorporated by reference to Exhibit 4.1 to United States Steel Corporation’s Form 8-K filed on March 27, 2013, Commission File Number 1-16811.
 
 
 
 
(i)
Seventh Supplemental Indenture dated as of March 26, 2013, between ÁñÁ«ÊÓƵ and The Bank of New York Mellon, formerly known as The Bank of New York, regarding 2.75% Senior Convertible Notes due April 1, 2019.
 
Incorporated by reference to Exhibit 4.2 to United States Steel Corporation’s Form 8-K filed on March 27, 2013, Commission File Number 1-16811.
 
 
 
 
(j)
ÁñÁ«ÊÓƵ Certificate of Elimination filed with the Secretary of State of the State of Delaware on December 5, 2007
 
Incorporated by reference to Exhibit 3.1 to United States Steel Corporation's Form 8-K filed on December 6, 2007, Commission File Number 1-16811.
 
 
 
(k)
EUR 200,000,000 multicurrency revolving credit facility agreement dated July 15, 2013, among U. S. Steel Košice, s.r.o., and ING Bank N.V., Commerzbank Aktiengesellschaft, Slovenská sporiteĺňa, a.s., Komerční banka, a.s. and Citibank Europe plc.
 
Incorporated by reference to Exhibit 10.2 to United States Steel Corporation’s Form 8-K filed on July 16, 2013, Commission File Number 1-16811.

Certain long-term debt instruments are omitted pursuant to Item 601(b)(4)(iii) of Regulation S-K. U. S. Steel agrees to furnish to the Commission on request a copy of any instrument defining the rights of holders of long-term debt of U. S. Steel and of any subsidiary for which consolidated or unconsolidated financial statements are required to be filed.


97

Table of Contents

10.    Material Contracts

(a)
ÁñÁ«ÊÓƵ 2002 Stock Plan, as amended April 26, 2005.
 
Incorporated by reference to Exhibit 10.5 to United States Steel Corporation’s Form 10-Q for the quarter ended March 31, 2005, Commission File Number 1-16811.
 
 
 
 
(b)
ÁñÁ«ÊÓƵ Supplemental Retirement Account Program.
 
 
 
 
 
 
(c)
ÁñÁ«ÊÓƵ Executive Management Supplemental Pension Program.
 
Incorporated by reference to Exhibit 10.6 to United States Steel Corporation’s Form 10-Q for the quarter ended September 30, 2013, Commission File Number 1-16811.
 
 
 
(d)
ÁñÁ«ÊÓƵ Supplemental Thrift Program.
 
Incorporated by reference to Exhibit 10.7 to United States Steel Corporation’s Form 10-Q for the quarter ended September 30, 2013, Commission File Number 1-16811.
 
 
 
(e)
ÁñÁ«ÊÓƵ Deferred Compensation Program for Non-Employee Directors, a program under the 2005 Stock Incentive Plan.
 
Incorporated by reference to Exhibit 10(d) to United States Steel Corporation’s Form 10-K for the year ended December 31, 2011, Commission File Number 1-16811.
 
 
 
(f)
Form of Severance Agreements between ÁñÁ«ÊÓƵ and its Officers.
 
 
 
 
 
(g)
Amended and Restated Agreement between ÁñÁ«ÊÓƵ and John P. Surma.
 
Incorporated by reference to Exhibit 10(f) to United States Steel Corporation’s Form 10-K for the year ended December 31, 2008, Commission File Number 1-16811.
 
 
 
(h)
Form of Offer Letter to Mario Longhi.
 
Incorporated by reference to Exhibit 10.1 to United States Steel Corporation’s Form 8-K filed on July 2, 2012, Commission File Number 1-16811.
 
 
 
(i)
Exhibit A to Offer Letter to Mario Longhi – Supplemental Account as Amended and Restated (effective November 1, 2013, the Supplemental Account was merged into the Supplemental Retirement Account Program filed as Exhibit 10(b)).
 
Incorporated by reference to Exhibit 10.10 to United States Steel Corporation’s Form 10-Q for the quarter ended September 30, 2013, Commission File Number 1-16811.
 
 
 
(j)
Form of Non-Compete Agreement attached to Offer Letter to Mario Longhi.
 
Incorporated by reference to Exhibit 10.4 to United States Steel Corporation’s Form 8-K filed on July 2, 2012, Commission File Number 1-16811.
 
 
 
 
(k)
Form of Offer Letter to David B. Burritt.
 
Incorporated by reference to Exhibit 10.2 to ÁñÁ«ÊÓƵ's Form 8-K filed on August 20, 2013, Commission File Number 1-16811.
 
 
 
(l)
Amended and Restated Agreement between ÁñÁ«ÊÓƵ and George F. Babcoke.
 
 
 
 
 
 
(m)
Tax Sharing Agreement between USX Corporation (renamed Marathon Oil Corporation) and ÁñÁ«ÊÓƵ.
 
Incorporated by reference to Exhibit 99.3 to United States Steel Corporation’s Form 8-K filed on January 3, 2002, Commission File Number 1-16811.
 
 
 

98

Table of Contents

(n)
Financial Matters Agreement between USX Corporation (renamed Marathon Oil Corporation) and ÁñÁ«ÊÓƵ.
 
Incorporated by reference to Exhibit 99.5 to United States Steel Corporation’s Form 8-K filed on January 3, 2002, Commission File Number 1-16811.
 
 
 
 
(o)
Second Amended and Restated Receivables Purchase Agreement, dated as of September 27, 2006 among U. S. Steel Receivables, as Seller; ÁñÁ«ÊÓƵ, as initial Servicer; the persons party thereto as CP Conduit Purchasers, Committed Purchasers, LC Banks and Funding Agents; and The Bank of Nova Scotia, as Collateral Agent.
 
Incorporated by reference to Exhibit 10.1 to United States Steel Corporation’s Form 8-K filed on September 28, 2006, Commission File Number 1-16811.
 
 
 
(p)
First Amendment to Second Amended and Restated Receivables Purchase Agreement, dated as of June 12, 2009, among U. S. Steel Receivables, as Seller; ÁñÁ«ÊÓƵ, as initial Servicer; the persons party thereto as CP Conduit Purchasers, Committed Purchasers, LC Banks and Funding Agents; and The Bank of Nova Scotia, as Collateral Agent.
 
Incorporated by reference to Exhibit 10.1 to United States Steel Corporation’s Form 8-K filed on June 16, 2009, Commission File Number 1-16811.
 
 
 
(q)
Second Amendment to the Second Amended and Restated Receivables Purchase Agreement, dated as of July 21, 2010, by and among U. S. Steel Receivables LLC, as Seller; United States Steel Corporation, as initial Servicer; the persons party thereto as CP Conduit Purchasers, Committed Purchasers, LC Banks and Funding Agents; and The Bank of Nova Scotia, as Collateral Agent.
 
Incorporated by reference to Exhibit 10.1 to United States Steel Corporation’s Form 8-K filed on July 22, 2010, Commission File Number 1-16811.
 
 
 
(r)
Third Amendment to the Second Amended and Restated Receivables Purchase Agreement, dated as of July 18, 2011, by and among U. S. Steel Receivables LLC, as Seller; United States Steel Corporation, as initial Servicer; the persons party thereto as Funding Agents, CP Conduit Purchasers, Committed Purchasers and LC Banks; and The Bank of Nova Scotia, as Collateral Agent.
 
Incorporated by reference to Exhibit 10.1 to United States Steel Corporation’s Form 8-K filed on July 21, 2011, Commission File Number 1-16811.
 
 
 
(s)
Fourth Amendment to the Second Amended and Restated Receivables Purchase Agreement, dated as of February 15, 2012, by and among U. S. Steel Receivables LLC, as Seller; United States Steel Corporation, as initial Servicer; the persons party thereto as Funding Agents, CP Conduit Purchasers, Committed Purchasers and LC Banks; and The Bank of Nova Scotia, as Collateral Agent.
 
Incorporated by reference to Exhibit 10.1 to United States Steel Corporation’s Form 10-Q for the quarter ended March 31, 2012, Commission File Number 1-16811.
 
 
 
 
(t)
Fifth Amendment to the Second Amended and Restated Receivables Purchase Agreement dated as of July 12, 2013, among U. S. Steel Receivables LLC, as Seller; ÁñÁ«ÊÓƵ, as initial Servicer; the persons party thereto as Funding Agents, CP Conduit Purchasers, Committed Purchasers and LC Banks; and The Bank of Nova Scotia, as Collateral Agent.
 
Incorporated by reference to Exhibit 10.1 to United States Steel Corporation’s Form 8-K filed on July 16, 2013, Commission File Number 1-16811.

99

Table of Contents

 
 
 
 
(u)
Sixth Amendment to the Second Amended and Restated Receivables Purchase Agreement dated as of October 4, 2013, among U. S. Steel Receivables LLC, as Seller; ÁñÁ«ÊÓƵ, as initial Servicer; the persons party thereto as Funding Agents, CP Conduit Purchasers, Committed Purchasers and LC Banks; and The Bank of Nova Scotia, as Collateral Agent.
 
Incorporated by reference to Exhibit 10.3 to United States Steel Corporation’s Form 10-Q for the quarter ended September 30, 2013, Commission File Number 1-16811.
 
 
 
(v)
Purchase and Sale Agreement dated November 28, 2001 among United States Steel LLC, as initial Servicer and as Originator; and U. S. Steel Receivables LLC as purchaser and contributee.
 
Incorporated by reference to Exhibit 10(o) to United States Steel Corporation’s Form 10-K for the year ended December 31, 2001, Commission File Number 1-16811.
 
 
 
(w)
First Amendment to the Purchase and Sale Agreement dated as of September 27, 2006, among ÁñÁ«ÊÓƵ and U. S. Steel Receivables LLC.
 
Incorporated by reference to Exhibit 10.2 to United States Steel Corporation’s Form 8-K filed on September 28, 2006, Commission File Number 1-16811.
 
 
 
 
(x)
Second Amendment to the Purchase and Sale Agreement dated as of June 12, 2009, among ÁñÁ«ÊÓƵ and U. S. Steel Receivables LLC.
 
Incorporated by reference to Exhibit 10.2 to United States Steel Corporation’s Form 8-K filed on June 16, 2009, Commission File Number 1-16811.
 
 
 
(y)
Form of Stock Option Grant to Officer-Directors under the ÁñÁ«ÊÓƵ 2002 Stock Plan.
 
Incorporated by reference to Exhibit 10(t) to United States Steel Corporation’s Form 10-K for the year ended December 31, 2004, Commission File Number 1-16811.
 
 
 
(z)
Form of Stock Option Grant to Executive Management Committee Members under the ÁñÁ«ÊÓƵ 2002 Stock Plan.
 
Incorporated by reference to Exhibit 10(u) to United States Steel Corporation’s Form 10-K for the year ended December 31, 2004, Commission File Number 1-16811.
 
 
 
(aa)
Base Salaries of Named Executive Officers.
 
Incorporated by reference to Exhibit 10.1 to United States Steel Corporation’s Form 10-Q for the quarter ended March 31, 2013, Commission File Number 1-16811.
 
 
 
(bb)
Summary of non-employee director fee arrangements.
 
 
 
 
 
(cc)
ÁñÁ«ÊÓƵ Non Tax-Qualified Pension Plan.
 
Incorporated by reference to Exhibit 10.8 to United States Steel Corporation’s Form 10-Q for the quarter ended September 30, 2013, Commission File Number 1-16811.
 
 
 
(dd)
ÁñÁ«ÊÓƵ Non Tax-Qualified Retirement Account Program.
 
 
 
 
 
(ee)
ÁñÁ«ÊÓƵ 2005 Stock Incentive Plan, as Amended and Restated.
 
Incorporated by reference to Appendix A to United States Steel Corporation’s Definitive Proxy Statement on Schedule 14A filed on March 12, 2010, Commission File Number 1-16811.
 
 
 
(ff)
Administrative Regulations for the Long-Term Incentive Compensation Program under the ÁñÁ«ÊÓƵ 2005 Stock Incentive Plan, as Amended and Restated.
 
Incorporated by reference to Exhibit 10.1 to United States Steel Corporation’s Form 8-K filed on May 30, 2013, Commission File Number 1-16811.
 
 
 

100

Table of Contents

(gg)
Non-Employee Director Stock Program, a program under the 2005 Stock Incentive Plan.
 
Incorporated by reference to Exhibit 10.1 to United States Steel Corporation’s Form 8-K filed on May 31, 2005, Commission File Number 1-16811.
 
 
 
(hh)
Form of stock option grant under the Long-Term Incentive Compensation Program, a program under the 2005 Stock Incentive Plan.
 
Incorporated by reference to Exhibit 10(x) to United States Steel Corporation’s Form 10-K for the year ended December 31, 2006, Commission File Number 1-16811.
 
 
 
(ii)
Form of Performance Award Grant Agreement under the 2005 Stock Incentive Plan, as Amended and Restated.
 
Incorporated by reference to Exhibit 10.3 to United States Steel Corporation’s Form 10-Q for the quarter ended March 31, 2011, Commission File Number 1-16811.
 
 
 
(jj)
Form of Stock Option Grant Agreement under the 2005 Stock Incentive Plan, as Amended and Restated.
 
Incorporated by reference to Exhibit 10.2 to United States Steel Corporation’s Form 10-Q for the quarter ended March 31, 2011, Commission File Number 1-16811.
 
 
 
 
(kk)
Form of Restricted Stock Unit Retention Grant Agreement under the 2005 Stock Incentive Plan, as Amended and Restated.
 
Incorporated by reference to Exhibit 10.5 to United States Steel Corporation’s Form 10-Q for the quarter ended March 31, 2011, Commission File Number 1-16811.
 
 
 
(ll)
Form of Restricted Stock Unit Annual Grant Agreement under the 2005 Stock Incentive Plan, as Amended and Restated.
 
Incorporated by reference to Exhibit 10.4 to United States Steel Corporation’s Form 10-Q for the quarter ended March 31, 2011, Commission File Number 1-16811.
 
 
 
(mm)
Form of Retention Performance Award Grant Agreement.
 
Incorporated by reference to Exhibit 10.5 to United States Steel Corporation’s Form 8-K filed on July 2, 2012, Commission File Number 1-16811.
 
 
 
(nn)
Administrative Regulations for the ÁñÁ«ÊÓƵ 2002 Stock Plan.
 
Incorporated by reference to Exhibit 10.2 to United States Steel Corporation’s Form 10-Q for the quarter ended June 30, 2009, Commission File Number 1-16811.
 
 
 
(oo)
Corporate Governance Principles Recoupment Policy (incorporated into various compensation plans and programs).
 
 
 
 
 
(pp)
ÁñÁ«ÊÓƵ 2010 Annual Incentive Compensation Plan.
 
Incorporated by reference to Appendix B to United States Steel Corporation’s Definitive Proxy Statement on Schedule 14A filed on March 12, 2010, Commission File Number 1-16811.
 
 
 
(qq)
Administrative Regulations for the 2010 Annual Incentive Compensation Plan.
 
Incorporated by reference to Exhibit 10(ee) to United States Steel Corporation’s Form 10-K for the year ended December 31, 2011, Commission File Number 1-16811.
 
 
 
(rr)
Form of Severance Agreement between United States Steel Corporation and John Surma.
 
Incorporated by reference to Exhibit 10(ff) to United States Steel Corporation’s Form 10-K for the year ended December 31, 2011, Commission File Number 1-16811.


101

Table of Contents

12.1.
Computation of Ratio of Earnings to Fixed Charges
 
 
21.
List of Subsidiaries
 
 
23.
Consent of PricewaterhouseCoopers LLP
 
 
24.
Powers of Attorney
 
 
31.1.
Certification of Chief Executive Officer required by Rules 13a-14(a) or 15d-14(a) of the Securities Exchange Act of 1934, as promulgated by the Securities and Exchange Commission pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
 
31.2.
Certification of Chief Financial Officer required by Rules 13a-14(a) or 15d-14(a) of the Securities Exchange Act of 1934, as promulgated by the Securities and Exchange Commission pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
 
32.1.
Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
 
32.2.
Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
 
95.
Mine Safety Disclosure required under Section 1503 of the Dodd-Frank Wall Street Reform and Consumer Protection Act
 
 
101.
INS XBRL Instance Document
 
 
101.
SCH XBRL Taxonomy Extension Schema Document
 
 
101.
CAL XBRL Taxonomy Extension Calculation Linkbase Document
 
 
101.
DEF XBRL Taxonomy Extension Definition Linkbase Document
 
 
101.
LAB XBRL Taxonomy Extension Label Linkbase Document
 
 
101.
PRE XBRL Taxonomy Extension Presentation Linkbase Document


102

Table of Contents

SCHEDULE II – VALUATION AND QUALIFYING ACCOUNTS AND RESERVES
YEARS ENDED DECEMBER 31, 2013, 2012 AND 2011
(Millions of Dollars)

 
 
 
 
Additions
 
Deductions
 
 
Description
 
Balance at
Beginning
of Period
 
Charged to
Costs and
Expenses
 
Charged
to Other
Accounts
 
Charged to
Costs and
Expenses
 
Charged
to Other
Accounts
 
Balance at
End of
Period
Year ended December 31, 2013:
 
 
 
 
 
 
 
 
 
 
 
 
Reserves deducted in the balance sheet from the assets to which they apply:
 
 
 
 
 
 
 
 
 
 
 
 
Allowance for doubtful accounts
 
$
55

 
$
5

 
$

 
$

 
$
7

 
$
53

Investments and long-term receivables reserve
 
3

 

 
7

 

 

 
10

Deferred tax valuation allowance:
 
 
 
 
 
 
 
 
 
 
 
 
State
 

 

 

 

 

 

Foreign
 
1,099

 

 
142

 
142

 
71

 
1,028

Year ended December 31, 2012:
 
 
 
 
 
 
 
 
 
 
 
 
Reserves deducted in the balance sheet from the assets to which they apply:
 
 
 
 
 
 
 
 
 
 
 
 
Allowance for doubtful accounts
 
$
64

 
$

 
$

 
$
1

 
$
8

 
$
55

Investments and long-term receivables reserve
 
3

 

 

 

 

 
3

Deferred tax valuation allowance:
 
 
 
 
 
 
 
 
 
 
 
 
State
 

 

 

 

 

 

Foreign
 
1,018

 
47

 
169

 

 
135

(a) 
1,099

Year ended December 31, 2011:
 
 
 
 
 
 
 
 
 
 
 
 
Reserves deducted in the balance sheet from the assets to which they apply:
 
 
 
 
 
 
 
 
 
 
 
 
Allowance for doubtful accounts
 
$
48

 
$
3

 
$
13

 
$

 
$

 
$
64

Investments and long-term receivables reserve
 
22

 

 

 

 
19

 
3

Deferred tax valuation allowance:
 
 
 
 
 
 
 
 
 
 
 
 
State
 
5

 

 

 

 
5

 

Foreign
 
870

 
48

 
119

 

 
19

 
1,018

(a)
The deferred tax asset valuation allowance for U. S. Steel Serbia was removed as a result of the sale of U. S. Steel Serbia on January 31, 2012.


103

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacity indicated on February 25, 2014.

UNITED STATES STEEL CORPORATION

By:
 
/s/ Gregory A. Zovko
 
 
Gregory A. Zovko
 
 
Vice President & Controller
Signature
 
Title
/s/ Mario Longhi
 
President & Chief Executive Officer &
Director
Mario Longhi
 
 
 
 
/s/ David B. Burritt
 
Executive Vice President &
Chief Financial Officer
David B. Burritt
 
 
 
 
/s/ Gregory A. Zovko
 
Vice President & Controller
Gregory A. Zovko
 
 
 
 
*
 
Director
Dan O. Dinges
 
 
 
 
*
 
Director
John G. Drosdick
 
 
 
 
*
 
Director
John J. Engel
 
 
 
 
*
 
Director
Richard A. Gephardt
 
 
 
 
*
 
Director
Murry S. Gerber
 
 
 
 
*
 
Director
Thomas W. LaSorda
 
 
 
 
*
 
Director
Charles R. Lee
 
 
 
 
*
 
Director
Robert A. McDonald
 
 
 
 
*
 
Director
Glenda G. McNeal
 
 
 
 
*
 
Director
Seth E. Schofield
 
 
 
 
*
 
Director
David S. Sutherland
 
 
 
 
*
 
Director
Patricia A. Tracey
 

*
 
BY:
 
/s/ David B. Burritt
 
 
 
 
David B. Burritt
 
 
 
 
Attorney-in-Fact

104

Table of Contents

GLOSSARY OF CERTAIN DEFINED TERMS

The following definitions apply to terms used in this document:

2012 Labor Agreements
 
Collective bargaining agreements with the USW entered into effective September 1, 2012
Acero Prime
 
Acero Prime, S.R.L. de CV
AD
 
antidumping
ARO
 
Asset Retirement Obligation
ASC
 
Accounting Standards Codification
Apolo
 
Apolo Tubulars S.A.
BACT
 
Best Achievable Control Technology
BAT
 
Best Available Technique
Baycoat
 
Baycoat Limited Partnership, a U. S. Steel and ArcelorMittal Dofasco, Inc. joint venture
BOF
 
basic oxygen furnace
CAA
 
Clean Air Act
CAL
 
continuous annealing line
CDC
 
Chrome Deposit Corporation
CERCLA
 
Comprehensive Environmental Response, Compensation and Liability Act
CMS
 
Corrective Measure Study
CO2
 
carbon dioxide
CVD
 
countervailing duties
CWA
 
Clean Water Act
DESCO
 
Double Eagle Steel Coating Company
DOC
 
U.S. Department of Commerce
Double G
 
Double G Coatings Company LLC
EAF
 
Electric Arc Furnace
EC
 
European Commission
EPA
 
U.S. Environmental Protection Agency
ERB
 
Environmental Revenue Bond
ERP
 
Enterprise resource planning
ERW
 
electric resistance welded
ETS
 
Emissions Trading System
EU
 
European Union
Eurofer
 
European Confederation of Iron and Steel Industries
Flat-Rolled
 
Flat-Rolled Products segment
FPC
 
Feralloy Processing Company
Gateway
 
Gateway Energy & Coke Company, LLC, a subsidiary of SunCoke Energy
GHG
 
greenhouse gas
Hibbing
 
Hibbing Taconite Company
ITC
 
U.S. International Trade Commission
Keetac
 
U. S. Steel’s iron ore operations at Keewatin, Minnesota
LAER
 
Lowest Achievable Emissions Reductions
Lone Star
 
Lone Star Technologies, Inc.
MACT
 
Maximum Achievable Control Technology
Minntac
 
U. S. Steel’s iron ore operations at Mt. Iron, Minnesota
NAAQS
 
National Ambient Air Quality Standards
NOV
 
Notice of Violation
NPDES
 
National Pollutant Discharge Elimination System
OCTG
 
oil country tubular goods
O. D.
 
outer diameter
PRO-TEC
 
PRO-TEC Coating Company, U. S. Steel and Kobe Steel Ltd. joint venture
PRP
 
potentially responsible party
RCRA
 
Resource Conservation and Recovery Act
REACH
 
Registration, Evaluation, Authorization and Restriction of Chemicals, Regulation 1907/2006
RFI
 
RCRA Facility Investigation
RPA
 
Receivables Purchase Agreement
SEC
 
Securities and Exchange Commission
SIP
 
State Implementation Plan

105

Table of Contents

SPT
 
Steelworkers Pension Trust
Stelco
 
Stelco Inc.
Tilden
 
Tilden Mining Company
tons
 
net tons
Tubular
 
Tubular Products segment
U.S. GAAP
 
accounting standards generally accepted in the United States
UPI
 
ÁñÁ«ÊÓƵ-POSCO Industries
ÁñÁ«ÊÓƵC
 
U. S. Steel Canada Inc.
ÁñÁ«ÊÓƵE
 
U. S. Steel Europe segment
ÁñÁ«ÊÓƵK
 
U. S. Steel Košice
ÁñÁ«ÊÓƵ-POSCO
 
ÁñÁ«ÊÓƵ-POSCO Industries, U. S. Steel and POSCO joint venture
ÁñÁ«ÊÓƵR
 
U. S. Steel Receivables LLC
ÁñÁ«ÊÓƵS
 
U. S. Steel Serbia
USW
 
United Steelworkers
Wabush
 
Wabush Mines
Worthington
 
Worthington Specialty Processing, U. S. Steel and Worthington Industries, Inc. joint venture

106

Table of Contents

SUPPLEMENTARY DATA
DISCLOSURES ABOUT FORWARD-LOOKING STATEMENTS

U. S. Steel includes forward-looking statements concerning strategies, plans, trends, market forces, commitments, material events or other contingencies potentially affecting the Company in reports filed with the Securities and Exchange Commission, external documents and oral presentations. In accordance with “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, U. S. Steel is filing the following cautionary language identifying important factors (though not necessarily all such factors) that could cause actual outcomes to differ materially from information set forth in forward-looking statements made by, or on behalf of, U. S. Steel and our representatives.

Cautionary Language Concerning Forward-Looking Statements

Forward-looking statements with respect to U. S. Steel may include, but are not limited to, comments about general business strategies, financing decisions, projections of levels of revenues, income from operations or income from operations per ton, net income or earnings per share; levels of capital, environmental or maintenance expenditures; levels of employee benefits; the success or timing of completion of ongoing or anticipated capital or maintenance projects; levels of raw steel production capability, prices, production, shipments, or labor and raw materials costs; availability of raw materials; the acquisition, idling, shutdown or divestiture of assets or businesses; the effect of restructuring or reorganization of business components and cost-reduction programs; the effect of collective bargaining agreements and relations with unions, the effect of potential steel industry consolidation; the effect of potential legal proceedings on our business and financial condition; the effects of actions of third parties such as competitors, or foreign, federal, state or local regulatory authorities; and the effects of import quotas, tariffs and other protectionist measures.

Forward-looking statements typically contain words such as “anticipates,” “believes,” “estimates,” “expects,” “forecasts,” “predicts” or “projects,” or variations of these words, suggesting that future outcomes are uncertain. The following discussion is intended to identify important factors (though not necessarily all such factors) that could cause future outcomes to differ materially from those set forth in forward-looking statements with respect to U. S. Steel.

Liquidity Factors

U. S. Steel’s ability to finance our future business requirements through internally generated funds (including asset sales), proceeds from the sale of stock, borrowings and other external financing sources is affected by our performance (as measured by various factors, including cash provided from operating activities), levels of inventories and accounts receivable, the state of worldwide credit, debt and equity markets, investor perceptions and expectations of past and future performance and actions, the overall North American and international financial climate, and, in particular, with respect to borrowings, by the level of U. S. Steel’s outstanding debt, our ability to comply with debt covenants and our credit ratings by rating agencies. To the extent that U. S. Steel management’s assumptions concerning these factors prove to be inaccurate, U. S. Steel may have difficulty obtaining the funds necessary to maintain or expand our operations.

Our major cash requirements in 2014 are expected to be for capital expenditures, employee benefits, debt service and operating costs, including purchases of raw materials. We ended 2013 with $604 million of cash and cash equivalents and total liquidity of $2.3 billion.

Market Factors

U. S. Steel’s expectations as to levels of production and revenues, gross margins, income from operations and income from operations per ton are based upon assumptions as to global market conditions, future product prices and mix, and levels of raw steel production capability, production and shipments. These assumptions may prove to be inaccurate.

2013 marked the start of the transformation of U. S. Steel as we execute on our shareholder value creation strategy: earn the right to grow, and drive and sustain profitable growth. Through a disciplined approach we now refer to as “The Carnegie Way”, we are working to strengthen our balance sheet, with more intense focus on cash flow, and have launched a series of initiatives that we believe will enable us to add value, get leaner faster, right-size, and improve our performance across our core business process capabilities, including commercial, supply chain, manufacturing, procurement, innovation, and operational and functional support. We are on a mission to define and create a sustainable competitive advantage with a relentless focus on economic profit, our customers, our cost structure and innovation.

The global steel industry is cyclical, highly competitive and has historically been characterized by overcapacity.


107

Table of Contents

U. S. Steel competes with many North American and international steel producers. Competitors include integrated producers which, like U. S. Steel, use iron ore and coke as primary raw materials for steel production, and electric arc furnace (EAF) producers, which primarily use steel scrap and other iron-bearing feedstocks as raw materials.

EAF producers typically require lower capital expenditures for construction of facilities and may have lower total employment costs; however, these competitive advantages may be minimized or eliminated by the cost of scrap when scrap prices are high. Some mini-mills utilize thin slab casting technology to produce flat-rolled products and are increasingly able to compete directly with integrated producers of flat-rolled products, previously produced only by integrated steelmaking. International competitors may also have lower labor costs than U.S. producers and some are owned, controlled or subsidized by their governments, allowing their production and pricing decisions to be influenced by political and economic policy considerations, as well as prevailing market conditions. Such competition could adversely affect our future product prices and shipment levels.

We also face competition in many markets from producers of materials such as aluminum, cement, composites, glass, plastics, wood and carbon fiber. The emergence of additional substitutes for steel products could adversely affect future prices and demand for steel products.

We are subject to market conditions in those areas which are influenced by many of the same factors that affect U.S. markets, as well as matters specific to international markets such as foreign currency exchange rate quotas, tariffs and other protectionist measures. Since our European operations are more dependent upon purchased raw materials than our North American operations they are more subject to the impact of changes in world supply, demand and prices of such raw materials.

Changes in foreign currency exchange rates may impact demand and prices for our products both within the respective domestic markets and for export.

Steel imports have been and we expect will continue to be a significant factor in all of our major markets. Many steel imports have violated United States, Canadian and European international trade laws. We have not always been successful in obtaining relief under these international trade laws. Increases in future levels of imported steel to North America and Europe could reduce future market prices and demand levels for steel products produced in those markets.

Operating and Cost Factors

U. S. Steel is also exposed to casualty risks such as the structural failure at Gary Works in 2010 that disrupted operations for several weeks. If major equipment or structures fail in the future we may incur substantial repair costs and business interruptions. Similarly, if any of our critical suppliers suffer such a casualty we may suffer business interruptions. There also exists the chance of other unexpected events such as power outages, weather related events or transportation disruption that may affect operating levels, production and profitability. We may also be affected if major suppliers or customers experience such events.

As an integrated steel producer, U. S. Steel’s primary raw materials are iron units in the form of iron ore pellets and sinter ore, carbon units in the form of coal and coke (which is produced from coking coal) and steel scrap. U. S. Steel is not 100% self-sufficient in raw materials and as a consequence purchases all of its coking coal as well as significant amounts of iron units, exposing us to market risks for such raw materials.

Most hourly employees of U. S. Steel’s flat-rolled, tubular, cokemaking and iron ore pellet facilities in the United States are covered by collective bargaining agreements with the United Steelworkers (USW) entered into effective September 1, 2012 (the 2012 Labor Agreements) that expire on September 1, 2015. At U. S. Steel Canada the collective bargaining agreement with the USW covering employees at Lake Erie Works expires in September 2015. The collective bargaining agreement with the USW covering employees at Hamilton Works expires in October 2014.

In Europe, most represented employees at ÁñÁ«ÊÓƵK are represented by the OZ Metalurg union and are covered by an agreement that expires at the end of December 2014.

In both North America and Europe, future results may be impacted by labor disputes and the terms of future collective bargaining agreements.

Future net periodic benefit costs for pensions and other benefits can be volatile and depend on the future market performance of plan assets; changes in actuarial assumptions regarding such factors as selection of a discount rate, the expected rate of return on plan assets and escalation of retiree health care costs; plan amendments affecting benefit payout levels; and profile changes in the beneficiary populations being valued. Changes in the assumptions

108

Table of Contents

or differences between actual and expected changes in the present value of liabilities or assets of U. S. Steel’s plans could cause net periodic benefit costs to increase or decrease materially from year to year. To the extent that these costs increase in the future, income from operations would be reduced.

At December 31, 2013, on an accounting basis, U. S. Steel’s retiree medical and life insurance were underfunded by $1.4 billion and our pension plans were underfunded by $1.1 billion. The level of cash funding in future years depends upon various factors such as any voluntary contributions we may make, future asset performance, the level of interest rates used to measure ERISA and similar Canadian minimum funding levels, the impacts of business acquisitions or divestitures, union negotiated changes and future government regulation. Any such funding requirements will have an unfavorable impact on U. S. Steel’s cash flows and could negatively affect our ability to comply with our debt covenants and borrowing arrangements. Additionally, funding requirements could divert committed capital and delay or cancel projects that we believe would increase our ability to meet our customers’ needs as well as our profitability.

Carbon Strategy

Our carbon strategy in North America is to achieve the lowest cost fuel rate to produce hot metal in our blast furnaces. We have made investments in new facilities at Clairton and Gary to become self-sufficient in coke and to eliminate the need to purchase merchant market coke. We have aggressively worked to adjust our coal blends that feed our coke batteries in order to use lower cost coals. We also have increased the natural gas injection capabilities on our blast furnaces to utilize the abundant supply of competitively priced natural gas. This strategy has improved our flexibility to use the lowest cost combination of coke, injection coal, and natural gas in our blast furnaces to achieve the lowest cost fuel rate in a dynamic pricing environment. Whether these savings will be obtained in the future is subject to many factors including those discussed above.

Alternative Iron and Steelmaking Technologies
We are examining alternative iron and steelmaking technologies such as gas-based, direct-reduced iron (DRI) and electric arc furnace (EAF) steelmaking. We are currently in the permitting process for the installation of an EAF at our Fairfield Works in Alabama. We submitted air and water permit applications to the Jefferson County Department of Health and the Alabama Department of Environmental Management, respectively, in February 2014.
The DRI process requires iron pellets with a lower silica content than blast furnace pellets. We have verified that our iron ore reserves are suitable for direct reduced (DR) grade pellet production and are examining the capital and engineering design process requirements to produce DR grade pellets at our Minntac operations for use internally by the Company if we were to construct a DRI facility or for sale to external third parties with DRI facilities.

Legal and Environmental Factors

The profitability of U. S. Steel’s operations could be affected by a number of contingencies, including legal actions. The ultimate resolution of these contingencies could, individually or in the aggregate, be material to the U. S. Steel financial statements.

U. S. Steel is subject to numerous environmental laws and discharge and clean up laws in the United States, Canada and Europe. Such laws, including CO2 greenhouse gas laws that have been adopted or are being considered, may impact our costs, operating rates and income. These laws may also impact major suppliers and customers. Steel producers in other places, especially China and other developing economies, may be impacted differently than we are. Certain current and former U. S. Steel operating facilities have been in operation for many years and could require significant future accruals and expenditures to meet existing and future requirements under these laws. To the extent that competitors are not required to undertake equivalent costs in their operations, the competitive position of U. S. Steel could be adversely affected.

For further discussion of certain of the factors described herein and their potential effects on the businesses of U. S. Steel, see “Item 1. Business,” “Item 1A. Risk Factors,” “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Item 7A. Quantitative and Qualitative Disclosures About Market Risk.”

109